From: Ye Li Date: Fri, 25 Oct 2019 08:28:48 +0000 (-0700) Subject: imx8mq: Enable eMMC HS400 and SD UHS mode on EVK X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=15a7426045ba048bb4defe49b1cae885bffb1853;p=u-boot.git imx8mq: Enable eMMC HS400 and SD UHS mode on EVK iMX8MQ EVK board has a eMMC5.0 chip and supports SD3.0, so enable the UHS and HS400 configs to enhance the eMMC/SD access. The change also needs to set usdhc clock to 400Mhz, and add the off-on-delay-us to SD reset pin, otherwise some SD cards will fail to select UHS mode in re-initialization. Reviewed-by: Fabio Estevam Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/arch/arm/mach-imx/imx8m/clock_imx8mq.c index aad9cf13ef..76104e4f92 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mq.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mq.c @@ -428,15 +428,13 @@ void init_clk_usdhc(u32 index) case 0: clock_enable(CCGR_USDHC1, 0); clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON | - CLK_ROOT_SOURCE_SEL(1) | - CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2)); + CLK_ROOT_SOURCE_SEL(1)); clock_enable(CCGR_USDHC1, 1); return; case 1: clock_enable(CCGR_USDHC2, 0); clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON | - CLK_ROOT_SOURCE_SEL(1) | - CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2)); + CLK_ROOT_SOURCE_SEL(1)); clock_enable(CCGR_USDHC2, 1); return; default: