From: Quentin Schulz Date: Wed, 6 Nov 2024 11:29:44 +0000 (+0100) Subject: rockchip: rk3399: move sysreset-gpio logic to TPL X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=0a17123dedf827f4ca9b158252279adf03906307;p=u-boot.git rockchip: rk3399: move sysreset-gpio logic to TPL If TPL_GPIO and TPL_PINCTRL_ROCKCHIP are enabled and a sysreset-gpio is provided in the TPL Device Tree, this will trigger a system reset similar to what's currently been done in SPL whenever the RK3399 "warm" boots. Because there's currently only one user of sysreset-gpio logic, and TPL is enabled on that board, so let's migrate the logic and that board to do it in TPL. There are three reasons for moving this earlier: - faster boot time as we don't need to reach SPL to be able to reset the system on a condition we know is already met in TPL, - have less code to be impacted by the issue this system reset works around (that is, "unclean" SoC registers after a reboot), - less confusion around the reason for restarting. Indeed when done from SPL, the following log can be observed: """ U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45) Channel 0: DDR3, 666MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: DDR3, 666MHz BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB 256B stride Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45 +0100) Trying to boot from MMC2 U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45) """ possibly hinting at an issue within the SPL when loading the fitImage from MMC2 instead of the normal course of events (a system reset). Signed-off-by: Quentin Schulz Reviewed-by: Paul Kocialkowski Reviewed-by: Kever Yang --- diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 7b6a822ed0..0c28241c60 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -169,7 +169,8 @@ void board_debug_uart_init(void) } #endif -#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) +#if defined(CONFIG_TPL_BUILD) static void rk3399_force_power_on_reset(void) { const struct rockchip_cru *cru = rockchip_get_cru(); @@ -195,9 +196,9 @@ static void rk3399_force_power_on_reset(void) if (cru->glb_rst_st == 0) return; - if (!IS_ENABLED(CONFIG_SPL_GPIO)) { + if (!IS_ENABLED(CONFIG_TPL_GPIO)) { debug("%s: trying to force a power-on reset but no GPIO " - "support in SPL!\n", __func__); + "support in TPL!\n", __func__); return; } @@ -218,6 +219,11 @@ static void rk3399_force_power_on_reset(void) dm_gpio_set_value(&sysreset_gpio, 1); } +void tpl_board_init(void) +{ + rk3399_force_power_on_reset(); +} +# else void __weak led_setup(void) { } @@ -225,7 +231,6 @@ void __weak led_setup(void) void spl_board_init(void) { led_setup(); - - rk3399_force_power_on_reset(); } #endif +#endif diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 67c0ee72c9..7a180b1413 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -30,6 +30,7 @@ CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y +CONFIG_TPL_GPIO=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set @@ -78,6 +79,8 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_TPL_PINCTRL=y +CONFIG_TPL_PINCTRL_FULL=y CONFIG_DM_PMIC_FAN53555=y CONFIG_PMIC_RK8XX=y CONFIG_SPL_PMIC_RK8XX=y