arm: dts: imx93-11x11-evk: add bootph-some-ram property

i.MX93 11x11 EVK fails to boot:

U-Boot SPL 2023.10-00558-g65b9b3462bec-dirty (Oct 03 2023 - 17:40:10 +0200)
SOC: 0xa0009300
LC: 0x40010
M33 prepare ok
Normal Boot
Trying to boot from BOOTROM
Boot Stage: Primary boot
image offset 0x8000, pagesize 0x200, ivt offset 0x0
Load image from 0x44400 by ROM_API
NOTICE:  BL31: v2.8(release):android-13.0.0_2.0.0-0-ge4b2dbfa52f5
NOTICE:  BL31: Built : 17:52:46, Sep 28 2023

That's because commit 9e644284ab81 ("dm: core: Report
bootph-pre-ram/sram node as pre-reloc after relocation"):

	"[This] changes behavior of what nodes are bound in the U-Boot
	proper pre-relocation phase. Change to bootph-all or add
	bootph-some-ram prop to restore prior behavior."

Fix this by adding bootph-some-ram prop as suggested by the commit
above.

Fixes: 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
index 93b4d91e4c39e3f6a19dcdf5e952a94e904b0d31..a9dffa5a71e98c89c35cb689d09fb42ea2fd5cc6 100644 (file)
--- a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
@@ -8,6 +8,7 @@
                compatible = "wdt-reboot";
                wdt = <&wdog3>;
                bootph-pre-ram;
+               bootph-some-ram;
        };
 
        firmware {
@@ -30,19 +31,23 @@
 
 &aips2 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &aips3 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &iomuxc {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &reg_usdhc2_vmmc {
        u-boot,off-on-delay-us = <20000>;
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &pinctrl_reg_usdhc2_vmmc {
@@ -51,59 +56,73 @@
 
 &pinctrl_uart1 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &pinctrl_usdhc2_gpio {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &pinctrl_usdhc2 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &gpio1 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &gpio2 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &gpio3 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &gpio4 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &lpuart1 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &usdhc1 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &usdhc2 {
        bootph-pre-ram;
+       bootph-some-ram;
        fsl,signal-voltage-switch-extra-delay-ms = <8>;
 };
 
 &lpi2c2 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &{/soc@0/bus@44000000/i2c@44350000/pmic@25} {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &{/soc@0/bus@44000000/i2c@44350000/pmic@25/regulators} {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &pinctrl_lpi2c2 {
        bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &fec {
@@ -124,6 +143,7 @@
 
 &s4muap {
        bootph-pre-ram;
+       bootph-some-ram;
        status = "okay";
 };