sunxi: Sync sun8i-h3-orangepi-plus.dts with upstream

This enables extra USB controllers which enable use of the 3rd USB
port on the new Orange Pi Plus 2E variant.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
index 900ec4fc8c818a660435a048e699007eb9529068..28f74f6ffd1ea119dfcfe99462673f5739f4ac08 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
@@ -40,26 +40,13 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
 
 / {
-       model = "Xunlong Orange Pi Plus";
+       model = "Xunlong Orange Pi Plus / Plus 2 / Plus 2E";
        compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
        reg_usb3_vbus: usb3-vbus {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -71,75 +58,42 @@
                enable-active-high;
                gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
        };
+};
 
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_opc>;
-
-               status_led {
-                       label = "status:red:user";
-                       gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       r_leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_r_opc>;
-
-               tx {
-                       label = "pwr:green:user";
-                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
-       };
-
-       r_gpio_keys {
-               compatible = "gpio-keys";
-               input-name = "sw4";
-
-               pinctrl-names = "default";
-               pinctrl-0 = <&sw_r_opc>;
+&ehci2 {
+       status = "okay";
+};
 
-               sw4@0 {
-                       label = "sw4";
-                       linux,code = <BTN_0>;
-                       gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-               };
-       };
+&ehci3 {
+       status = "okay";
 };
 
-&pio {
-       leds_opc: led_pins@0 {
-               allwinner,pins = "PA15";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_8bit_pins>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <8>;
+       non-removable;
+       cap-mmc-hw-reset;
+       status = "okay";
 };
 
-&r_pio {
-       leds_r_opc: led_pins@0 {
-               allwinner,pins = "PL10";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&mmc2_8bit_pins {
+       /* Increase drive strength for DDR modes */
+       allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+       /* eMMC is missing pull-ups */
+       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
 
-       sw_r_opc: key_pins@0 {
-               allwinner,pins = "PL03";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&ohci1 {
+       status = "okay";
 };
 
-&ehci1 {
+&ohci2 {
        status = "okay";
 };
 
-&ehci3 {
+&ohci3 {
        status = "okay";
 };
 
@@ -152,33 +106,6 @@
        };
 };
 
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-       vmmc-supply = <&reg_vcc3v3>;
-       bus-width = <4>;
-       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-       cd-inverted;
-       status = "okay";
-};
-
-&reg_usb1_vbus {
-       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
-       status = "okay";
-};
-
-&usb1_vbus_pin_a {
-       allwinner,pins = "PG13";
-};
-
 &usbphy {
-       usb1_vbus-supply = <&reg_usb1_vbus>;
        usb3_vbus-supply = <&reg_usb3_vbus>;
-       status = "okay";
 };

diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index 6ca5e34c9bfc56f1e44ef59c911bfcfe1feaae72..72c0920466a76273b01fca1533c3ed5b99f072a4 100644 (file)
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -541,6 +541,16 @@
                                allwinner,drive = <SUN4I_PINCTRL_30_MA>;
                                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
                        };
+
+                       mmc2_8bit_pins: mmc2_8bit {
+                               allwinner,pins = "PC5", "PC6", "PC8",
+                                                "PC9", "PC10", "PC11",
+                                                "PC12", "PC13", "PC14",
+                                                "PC15", "PC16";
+                               allwinner,function = "mmc2";
+                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
                };
 
                ahb_rst: reset@01c202c0 {