doc: board: phytec: phycore-am62x: Update artifact names

Use proper binary artifact names for HSFS devices.
Do not use the *_unsigned binaries.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>

diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index 1d641a78cf879bcae4da1fe5ea1e09091bac5451..bc6d52466949e35c82acda2f38413e92743f150f 100644 (file)
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -92,9 +92,9 @@ Assuming the uSD card is `/dev/mmcblk0`:
 To boot from a micro SD card on a HSFS device simply copy the following
 artifacts to the FAT partition:
 
-* tiboot3.bin from R5 build as tiboot3.bin
-* tispl.bin_unsigned from Cortex-A build as tispl.bin
-* u-boot.img_unsigned from Cortex-A build as u-boot.img
+* tiboot3.bin from R5 build
+* tispl.bin from Cortex-A build
+* u-boot.img from Cortex-A build
 
 Boot
 ----