]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
projects / u-boot.git / commitdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | patch | inline | side by side (parent: 41098d2)
rockchip: Use common bss and stack addresses on RK3328
authorJonas Karlman <jonas@kwiboo.se>
Sat, 2 Mar 2024 19:16:13 +0000 (19:16 +0000)
committerKever Yang <kever.yang@rock-chips.com>
Thu, 14 Mar 2024 07:27:28 +0000 (15:27 +0800)
With the stack and text base used by U-Boot SPL and proper on RK3328
there is a high likelihood of overlapping when U-Boot proper + FDT nears
or exceeded 1 MiB in size.

Currently the following memory layout is typically used on RK3328:
[    0, 256K) - SPL binary
[ 256K,   2M) - TF-A / reserved
[   2M,   +X) - U-Boot proper binary (TEXT_BASE)
[   -X,   3M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR)
[  -8K,   3M)   - pre-reloc malloc heap (SYS_MALLOC_F_LEN)
[   -X,   4M) - SPL pre-reloc stack (SPL_STACK)
[  -8K,   4M)   - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN)
[   -X,   6M) - SPL reloc stack (SPL_STACK_R_ADDR)
[   5M,   6M)   - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN)
[  32M,  +8K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE)

SPL can safely load U-Boot proper + FDT to [2M, 4M-8K) with this layout.
However, the stack at [-X, 3M) used during U-Boot proper pre-reloc is
restricting the safe size of U-Boot proper + FDT to be less than 1 MiB.

Migrate to use common bss, stack and malloc heap size and addresses to
fix this restriction and allow for a larger U-Boot proper image size.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/mach-rockchip/rk3328/Kconfig patch | blob | history
configs/evb-rk3328_defconfig patch | blob | history
configs/nanopi-r2c-plus-rk3328_defconfig patch | blob | history
configs/nanopi-r2c-rk3328_defconfig patch | blob | history
configs/nanopi-r2s-rk3328_defconfig patch | blob | history
configs/orangepi-r1-plus-lts-rk3328_defconfig patch | blob | history
configs/orangepi-r1-plus-rk3328_defconfig patch | blob | history
configs/roc-cc-rk3328_defconfig patch | blob | history
configs/rock-pi-e-rk3328_defconfig patch | blob | history
configs/rock64-rk3328_defconfig patch | blob | history

diff --git a/arch/arm/mach-rockchip/rk3328/Kconfig b/arch/arm/mach-rockchip/rk3328/Kconfig
index d5cb649ae6baa49698d7f8b877e6bdaf224a6d9d..70770da5fdf2f1faf0c26b1ec9c34f4e1f44ce1b 100644 (file)
--- a/arch/arm/mach-rockchip/rk3328/Kconfig
+++ b/arch/arm/mach-rockchip/rk3328/Kconfig
@@ -21,13 +21,7 @@ config ROCKCHIP_STIMER_BASE
 config SYS_SOC
        default "rk3328"
 
-config SYS_MALLOC_F_LEN
-       default 0x2000
-
-config SPL_LIBCOMMON_SUPPORT
-       default y
-
-config SPL_LIBGENERIC_SUPPORT
+config ROCKCHIP_COMMON_STACK_ADDR
        default y
 
 config TPL_LDSCRIPT
@@ -39,6 +33,9 @@ config TPL_TEXT_BASE
 config TPL_STACK
        default 0xff098000
 
+config TPL_SYS_MALLOC_F_LEN
+       default 0x800
+
 source "board/rockchip/evb_rk3328/Kconfig"
 
 endif
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index da422c8ba4e772ee0d9c7a3e771b29b356175d22..4fa8a7d365a4599baddf0c69cdd2376b057b8f33 100644 (file)
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -2,22 +2,12 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x4000000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -33,16 +23,9 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-evb.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig
index 25850328f8b84ad1999182c82c351affa92ed1aa..5302fd91a0f56acf8e8fd94421c274df2b7f2dc7 100644 (file)
--- a/configs/nanopi-r2c-plus-rk3328_defconfig
+++ b/configs/nanopi-r2c-plus-rk3328_defconfig
@@ -2,22 +2,13 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2c-plus"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -33,16 +24,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2c-plus.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
index a4cb148246e659d5c60e8761ab690a78a5f56941..5a722c18263119ef10a5ccc99cce1200338708e7 100644 (file)
--- a/configs/nanopi-r2c-rk3328_defconfig
+++ b/configs/nanopi-r2c-rk3328_defconfig
@@ -2,22 +2,13 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2c"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -33,16 +24,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2c.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index c5d13788528b9434e659fb398878669101048681..985d02475ecea370e501d96208d00925b5cd5015 100644 (file)
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -2,22 +2,13 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -33,16 +24,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/orangepi-r1-plus-lts-rk3328_defconfig b/configs/orangepi-r1-plus-lts-rk3328_defconfig
index 6360f5df3864b010420d28906d9d7a79ddbdf98d..e9f7a1306923bd56814a68ee1b0e6ceb298fd48c 100644 (file)
--- a/configs/orangepi-r1-plus-lts-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig
@@ -2,23 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus-lts"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,18 +27,12 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus-lts.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/orangepi-r1-plus-rk3328_defconfig b/configs/orangepi-r1-plus-rk3328_defconfig
index 9473a08fe20d848fa0ea465df17d8ca3c027ebd5..6019f33ae3f5ea8fe63869f4dfe505f0baf91e2c 100644 (file)
--- a/configs/orangepi-r1-plus-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-rk3328_defconfig
@@ -2,23 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,18 +27,12 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index c66b1ccba2673149abd9c08203e82b21acebc4be..191dbff928bb52863e12b6cc867a7fa29cf21c27 100644 (file)
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -2,22 +2,13 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-roc-cc"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -33,16 +24,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-roc-cc.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
index 275ffc3ed8f478ebb816eb0ccf098458b5488801..e4f2123e0b17ccced626d83959c3b915794b8d98 100644 (file)
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -2,23 +2,13 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x4000000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -34,17 +24,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock-pi-e.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 1cb4e6777d45cb5120abbaef1eefc4275f2ae24d..f38431891bf80f446dcc3190cc73419a0d77c8a5 100644 (file)
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -2,23 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
-CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,18 +27,12 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2000000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
My U-Boot fork