*
* (C) Copyright 2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * Conversion to DM
+ * (C) 2019 Angelo Dureghello <angelo.dureghello@timesys.com>
*/
#include <common.h>
#include <env.h>
#include <malloc.h>
-
#include <command.h>
#include <net.h>
-#include <netdev.h>
#include <miiphy.h>
-
#include <asm/fec.h>
#include <asm/immap.h>
#include <linux/mii.h>
#define DBUF_LENGTH 1520
#define TX_BUF_CNT 2
#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1520
#define LAST_PKTBUFSRX PKTBUFSRX - 1
#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST)
-struct fec_info_s fec_info[] = {
-#ifdef CONFIG_SYS_FEC0_IOBASE
- {
- 0, /* index */
- CONFIG_SYS_FEC0_IOBASE, /* io base */
- CONFIG_SYS_FEC0_PINMUX, /* gpio pin muxing */
- CONFIG_SYS_FEC0_MIIBASE, /* mii base */
- -1, /* phy_addr */
- 0, /* duplex and speed */
- 0, /* phy name */
- 0, /* phyname init */
- 0, /* RX BD */
- 0, /* TX BD */
- 0, /* rx Index */
- 0, /* tx Index */
- 0, /* tx buffer */
- 0, /* initialized flag */
- (struct fec_info_s *)-1,
- },
-#endif
-#ifdef CONFIG_SYS_FEC1_IOBASE
- {
- 1, /* index */
- CONFIG_SYS_FEC1_IOBASE, /* io base */
- CONFIG_SYS_FEC1_PINMUX, /* gpio pin muxing */
- CONFIG_SYS_FEC1_MIIBASE, /* mii base */
- -1, /* phy_addr */
- 0, /* duplex and speed */
- 0, /* phy name */
- 0, /* phy name init */
+DECLARE_GLOBAL_DATA_PTR;
+
+static void init_eth_info(struct fec_info_s *info)
+{
#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
- (cbd_t *)DBUF_LENGTH, /* RX BD */
+ static u32 tmp;
+
+ if (info->index == 0)
+ tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
+ else
+ info->rxbd = (cbd_t *)DBUF_LENGTH;
+
+ /* setup Receive and Transmit buffer descriptor */
+ info->rxbd = (cbd_t *)((u32)info->rxbd + tmp);
+ tmp = (u32)info->rxbd;
+ info->txbd =
+ (cbd_t *)((u32)info->txbd + tmp +
+ (PKTBUFSRX * sizeof(cbd_t)));
+ tmp = (u32)info->txbd;
+ info->txbuf =
+ (char *)((u32)info->txbuf + tmp +
+ (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
+ tmp = (u32)info->txbuf;
#else
- 0, /* RX BD */
+ info->rxbd =
+ (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE,
+ (PKTBUFSRX * sizeof(cbd_t)));
+ info->txbd =
+ (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE,
+ (TX_BUF_CNT * sizeof(cbd_t)));
+ info->txbuf =
+ (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
#endif
- 0, /* TX BD */
- 0, /* rx Index */
- 0, /* tx Index */
- 0, /* tx buffer */
- 0, /* initialized flag */
- (struct fec_info_s *)-1,
- }
+
+#ifdef ET_DEBUG
+ printf("rxbd %x txbd %x\n", (int)info->rxbd, (int)info->txbd);
#endif
-};
+ info->phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
+}
+
+static void fec_reset(struct fec_info_s *info)
+{
+ volatile fec_t *fecp = (fec_t *)(info->iobase);
+ int i;
+
+ fecp->ecr = FEC_ECR_RESET;
+ for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i)
+ udelay(1);
-int fec_recv(struct eth_device *dev);
-int fec_init(struct eth_device *dev, bd_t * bd);
-void fec_halt(struct eth_device *dev);
-void fec_reset(struct eth_device *dev);
+ if (i == FEC_RESET_DELAY)
+ printf("FEC_RESET_DELAY timeout\n");
+}
-void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd)
+static void set_fec_duplex_speed(volatile fec_t *fecp, int dup_spd)
{
+ bd_t *bd = gd->bd;
+
if ((dup_spd >> 16) == FULL) {
/* Set maximum frame length */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
}
}
-static int fec_send(struct eth_device *dev, void *packet, int length)
-{
- struct fec_info_s *info = dev->priv;
- volatile fec_t *fecp = (fec_t *) (info->iobase);
- int j, rc;
- u16 phyStatus;
-
- miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) &&
- (j < MCFFEC_TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j >= MCFFEC_TOUT_LOOP) {
- printf("TX not ready\n");
- }
-
- info->txbd[info->txIdx].cbd_bufaddr = (uint) packet;
- info->txbd[info->txIdx].cbd_datlen = length;
- info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST;
-
- /* Activate transmit Buffer Descriptor polling */
- fecp->tdar = 0x01000000; /* Descriptor polling active */
-
-#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
- /*
- * FEC unable to initial transmit data packet.
- * A nop will ensure the descriptor polling active completed.
- * CF Internal RAM has shorter cycle access than DRAM. If use
- * DRAM as Buffer descriptor and data, a nop is a must.
- * Affect only V2 and V3.
- */
- __asm__ ("nop");
-
-#endif
-
-#ifdef CONFIG_SYS_UNIFY_CACHE
- icache_invalid();
-#endif
-
- j = 0;
- while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) &&
- (j < MCFFEC_TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j >= MCFFEC_TOUT_LOOP) {
- printf("TX timeout\n");
- }
-
-#ifdef ET_DEBUG
- printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__, __LINE__, __FUNCTION__, j,
- info->txbd[info->txIdx].cbd_sc,
- (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2);
-#endif
-
- /* return only status bits */
- rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
- info->txIdx = (info->txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-int fec_recv(struct eth_device *dev)
-{
- struct fec_info_s *info = dev->priv;
- volatile fec_t *fecp = (fec_t *) (info->iobase);
- int length;
-
- for (;;) {
-#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
-#endif
-#ifdef CONFIG_SYS_UNIFY_CACHE
- icache_invalid();
-#endif
- /* section 16.9.23.2 */
- if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = info->rxbd[info->rxIdx].cbd_datlen;
-
- if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) {
- printf("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- info->rxbd[info->rxIdx].cbd_sc);
-#ifdef ET_DEBUG
- printf("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- info->rxbd[info->rxIdx].cbd_sc);
-#endif
- } else {
-
- length -= 4;
- /* Pass the packet up to the protocol layers. */
- net_process_received_packet(net_rx_packets[info->rxIdx],
- length);
-
- fecp->eir |= FEC_EIR_RXF;
- }
-
- /* Give the buffer back to the FEC. */
- info->rxbd[info->rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if (info->rxIdx == LAST_PKTBUFSRX) {
- info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E;
- info->rxIdx = 0;
- } else {
- info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- info->rxIdx++;
- }
-
- /* Try to fill Buffer Descriptors */
- fecp->rdar = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
-}
-
#ifdef ET_DEBUG
-void dbgFecRegs(struct eth_device *dev)
+static void dbg_fec_regs(struct udevice *dev)
{
struct fec_info_s *info = dev->priv;
- volatile fec_t *fecp = (fec_t *) (info->iobase);
+ volatile fec_t *fecp = (fec_t *)(info->iobase);
printf("=====\n");
printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
}
#endif
-int fec_init(struct eth_device *dev, bd_t * bd)
+int mcffec_init(struct udevice *dev)
{
struct fec_info_s *info = dev->priv;
volatile fec_t *fecp = (fec_t *) (info->iobase);
- int i;
+ int rval, i;
uchar ea[6];
- fecpin_setclear(dev, 1);
-
- fec_reset(dev);
+ fecpin_setclear(info, 1);
+ fec_reset(info);
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
defined (CONFIG_SYS_DISCOVER_PHY)
mii_init();
- setFecDuplexSpeed(fecp, bd, info->dup_spd);
+ set_fec_duplex_speed(fecp, info->dup_spd);
#else
#ifndef CONFIG_SYS_DISCOVER_PHY
- setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
-#endif /* CONFIG_CMD_MII || CONFIG_MII */
+ set_fec_duplex_speed(fecp, (FECDUPLEX << 16) | FECSPEED);
+#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
+#endif /* CONFIG_CMD_MII || CONFIG_MII */
/* We use strictly polling mode only */
fecp->eimr = 0;
fecp->eir = 0xffffffff;
/* Set station address */
- if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
-#ifdef CONFIG_SYS_FEC1_IOBASE
- volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE);
- eth_env_get_enetaddr("eth1addr", ea);
- fecp1->palr =
- (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp1->paur = (ea[4] << 24) | (ea[5] << 16);
-#endif
- eth_env_get_enetaddr("ethaddr", ea);
- fecp->palr =
- (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp->paur = (ea[4] << 24) | (ea[5] << 16);
- } else {
-#ifdef CONFIG_SYS_FEC0_IOBASE
- volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE);
- eth_env_get_enetaddr("ethaddr", ea);
- fecp0->palr =
- (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp0->paur = (ea[4] << 24) | (ea[5] << 16);
-#endif
-#ifdef CONFIG_SYS_FEC1_IOBASE
- eth_env_get_enetaddr("eth1addr", ea);
- fecp->palr =
- (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp->paur = (ea[4] << 24) | (ea[5] << 16);
-#endif
+ if (info->index == 0)
+ rval = eth_env_get_enetaddr("ethaddr", ea);
+ else
+ rval = eth_env_get_enetaddr("eth1addr", ea);
+
+ if (!rval) {
+ puts("Please set a valid MAC address\n");
+ return -EINVAL;
}
+ fecp->palr =
+ (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
+ fecp->paur = (ea[4] << 24) | (ea[5] << 16);
+
/* Clear unicast address hash table */
fecp->iaur = 0;
fecp->ialr = 0;
/*
* Setup Buffers and Buffer Descriptors
*/
- info->rxIdx = 0;
- info->txIdx = 0;
+ info->rx_idx = 0;
+ info->tx_idx = 0;
/*
* Setup Receiver Buffer Descriptors (13.14.24.18)
/* Now enable the transmit and receive processing */
fecp->ecr |= FEC_ECR_ETHER_EN;
- /* And last, try to fill Rx Buffer Descriptors */
- fecp->rdar = 0x01000000; /* Descriptor polling active */
+ /* And last, try to fill Rx Buffer Descriptors
+ * Descriptor polling active
+ */
+ fecp->rdar = 0x01000000;
- return 1;
+ return 0;
}
-void fec_reset(struct eth_device *dev)
+static int mcffec_send(struct udevice *dev, void *packet, int length)
{
struct fec_info_s *info = dev->priv;
- volatile fec_t *fecp = (fec_t *) (info->iobase);
- int i;
+ volatile fec_t *fecp = (fec_t *)info->iobase;
+ int j, rc;
+ u16 phy_status;
- fecp->ecr = FEC_ECR_RESET;
- for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+ miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status);
+
+ /* section 16.9.23.3
+ * Wait for ready
+ */
+ j = 0;
+ while ((info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_READY) &&
+ (j < info->to_loop)) {
udelay(1);
+ j++;
}
- if (i == FEC_RESET_DELAY) {
- printf("FEC_RESET_DELAY timeout\n");
+ if (j >= info->to_loop)
+ printf("TX not ready\n");
+
+ info->txbd[info->tx_idx].cbd_bufaddr = (uint)packet;
+ info->txbd[info->tx_idx].cbd_datlen = length;
+ info->txbd[info->tx_idx].cbd_sc |= BD_ENET_TX_RDY_LST;
+
+ /* Activate transmit Buffer Descriptor polling */
+ fecp->tdar = 0x01000000; /* Descriptor polling active */
+
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
+ /*
+ * FEC unable to initial transmit data packet.
+ * A nop will ensure the descriptor polling active completed.
+ * CF Internal RAM has shorter cycle access than DRAM. If use
+ * DRAM as Buffer descriptor and data, a nop is a must.
+ * Affect only V2 and V3.
+ */
+ __asm__ ("nop");
+#endif
+
+#ifdef CONFIG_SYS_UNIFY_CACHE
+ icache_invalid();
+#endif
+
+ j = 0;
+ while ((info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_READY) &&
+ (j < info->to_loop)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= info->to_loop)
+ printf("TX timeout\n");
+
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
+ __FILE__, __LINE__, __func__, j,
+ info->txbd[info->tx_idx].cbd_sc,
+ (info->txbd[info->tx_idx].cbd_sc & 0x003C) >> 2);
+#endif
+
+ /* return only status bits */
+ rc = (info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_STATS);
+ info->tx_idx = (info->tx_idx + 1) % TX_BUF_CNT;
+
+ return rc;
+}
+
+static int mcffec_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct fec_info_s *info = dev->priv;
+ volatile fec_t *fecp = (fec_t *)info->iobase;
+ int length = -1;
+
+ for (;;) {
+#ifdef CONFIG_SYS_UNIFY_CACHE
+ icache_invalid();
+#endif
+ /* If nothing received - leave for() loop */
+ if (info->rxbd[info->rx_idx].cbd_sc & BD_ENET_RX_EMPTY)
+ break;
+
+ length = info->rxbd[info->rx_idx].cbd_datlen;
+
+ if (info->rxbd[info->rx_idx].cbd_sc & 0x003f) {
+ printf("%s[%d] err: %x\n",
+ __func__, __LINE__,
+ info->rxbd[info->rx_idx].cbd_sc);
+ } else {
+ length -= 4;
+
+ /*
+ * Pass the buffer ptr up to the protocol layers.
+ */
+ *packetp = net_rx_packets[info->rx_idx];
+
+ fecp->eir |= FEC_EIR_RXF;
+ }
+
+ /* Give the buffer back to the FEC. */
+ info->rxbd[info->rx_idx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if (info->rx_idx == LAST_PKTBUFSRX) {
+ info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E;
+ info->rx_idx = 0;
+ } else {
+ info->rxbd[info->rx_idx].cbd_sc = BD_ENET_RX_EMPTY;
+ info->rx_idx++;
+ }
+
+ /* Try to fill Buffer Descriptors
+ * Descriptor polling active
+ */
+ fecp->rdar = 0x01000000;
}
+
+ return length;
}
-void fec_halt(struct eth_device *dev)
+static void mcffec_halt(struct udevice *dev)
{
struct fec_info_s *info = dev->priv;
- fec_reset(dev);
+ fec_reset(info);
+ fecpin_setclear(info, 0);
- fecpin_setclear(dev, 0);
+ info->rx_idx = 0;
+ info->tx_idx = 0;
- info->rxIdx = info->txIdx = 0;
memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t));
memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t));
memset(info->txbuf, 0, DBUF_LENGTH);
}
-int mcffec_initialize(bd_t * bis)
+static const struct eth_ops mcffec_ops = {
+ .start = mcffec_init,
+ .send = mcffec_send,
+ .recv = mcffec_recv,
+ .stop = mcffec_halt,
+};
+
+/*
+ * Boot sequence, called just after mcffec_ofdata_to_platdata,
+ * as DM way, it replaces old mcffec_initialize.
+ */
+static int mcffec_probe(struct udevice *dev)
{
- struct eth_device *dev;
- int i;
-#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
- u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
-#endif
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct fec_info_s *info = dev->priv;
+ int node = dev_of_offset(dev);
+ int retval, fec_idx;
+ const u32 *val;
- for (i = 0; i < ARRAY_SIZE(fec_info); i++) {
+ info->index = dev->seq;
+ info->iobase = pdata->iobase;
+ info->phy_addr = -1;
- dev =
- (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
- sizeof *dev);
- if (dev == NULL)
- hang();
+ val = fdt_getprop(gd->fdt_blob, node, "mii-base", NULL);
+ if (val) {
+ u32 fec_iobase;
- memset(dev, 0, sizeof(*dev));
+ fec_idx = fdt32_to_cpu(*val);
+ if (fec_idx == info->index) {
+ fec_iobase = info->iobase;
+ } else {
+ printf("mii base != base address, fec_idx %d\n",
+ fec_idx);
+ retval = fec_get_base_addr(fec_idx, &fec_iobase);
+ if (retval)
+ return retval;
+ }
+ info->miibase = fec_iobase;
+ }
- sprintf(dev->name, "FEC%d", fec_info[i].index);
+ val = fdt_getprop(gd->fdt_blob, node, "phy-addr", NULL);
+ if (val)
+ info->phy_addr = fdt32_to_cpu(*val);
- dev->priv = &fec_info[i];
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
+ val = fdt_getprop(gd->fdt_blob, node, "timeout-loop", NULL);
+ if (val)
+ info->to_loop = fdt32_to_cpu(*val);
- /* setup Receive and Transmit buffer descriptor */
-#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
- fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
- tmp = (u32)fec_info[i].rxbd;
- fec_info[i].txbd =
- (cbd_t *)((u32)fec_info[i].txbd + tmp +
- (PKTBUFSRX * sizeof(cbd_t)));
- tmp = (u32)fec_info[i].txbd;
- fec_info[i].txbuf =
- (char *)((u32)fec_info[i].txbuf + tmp +
- (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
- tmp = (u32)fec_info[i].txbuf;
-#else
- fec_info[i].rxbd =
- (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
- (PKTBUFSRX * sizeof(cbd_t)));
- fec_info[i].txbd =
- (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
- (TX_BUF_CNT * sizeof(cbd_t)));
- fec_info[i].txbuf =
- (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
-#endif
+ init_eth_info(info);
-#ifdef ET_DEBUG
- printf("rxbd %x txbd %x\n",
- (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ info->bus = mdio_alloc();
+ if (!info->bus)
+ return -ENOMEM;
+ strcpy(info->bus->name, dev->name);
+ info->bus->read = mcffec_miiphy_read;
+ info->bus->write = mcffec_miiphy_write;
+
+ retval = mdio_register(info->bus);
+ if (retval < 0)
+ return retval;
#endif
- fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
+ return 0;
+}
- eth_register(dev);
+static int mcffec_remove(struct udevice *dev)
+{
+ struct fec_info_s *priv = dev_get_priv(dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- int retval;
- struct mii_dev *mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
- mdiodev->read = mcffec_miiphy_read;
- mdiodev->write = mcffec_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
-#endif
- if (i > 0)
- fec_info[i - 1].next = &fec_info[i];
- }
- fec_info[i - 1].next = &fec_info[0];
+ mdio_unregister(priv->bus);
+ mdio_free(priv->bus);
+
+ return 0;
+}
+
+/*
+ * Boot sequence, called 1st
+ */
+static int mcffec_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ const u32 *val;
- /* default speed */
- bis->bi_ethspeed = 10;
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
+ /* Default to 10Mbit/s */
+ pdata->max_speed = 10;
+
+ val = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
+ "max-speed", NULL);
+ if (val)
+ pdata->max_speed = fdt32_to_cpu(*val);
return 0;
}
+
+static const struct udevice_id mcffec_ids[] = {
+ { .compatible = "fsl,mcf-fec" },
+ { }
+};
+
+U_BOOT_DRIVER(mcffec) = {
+ .name = "mcffec",
+ .id = UCLASS_ETH,
+ .of_match = mcffec_ids,
+ .ofdata_to_platdata = mcffec_ofdata_to_platdata,
+ .probe = mcffec_probe,
+ .remove = mcffec_remove,
+ .ops = &mcffec_ops,
+ .priv_auto_alloc_size = sizeof(struct fec_info_s),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
projects / u-boot.git / commitdiff
