imx8mp: configs: add support for distro boot commands

Supported boot device types in iMX8MP: MMC.

CONFIG_CMD_PART is added for command part and CONFIG_CMD_FS_GENERIC is
for command fstype.

scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be
loaded to prior to execution. kernel_addr_r is the location in RAM where
the kernel will be loaded to. Delete unnecessary environment variables
because "run distro_bootcmd" is set to be the default boot mode.

On the iMX8MP platform I used, "mmc1" represents SD card and "mmc2"
represents eMMC.

Signed-off-by: Alice Guo <alice.guo@nxp.com>

diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 2e4f517c51591ea291b4f4ec4694b3cf48b1b006..1d6255f31f0110f76e092c8c27e7e83174e9a36d 100644 (file)
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -54,6 +54,8 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y

diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 5cda473e7828b20474193eb0b80fbc8e144f27b5..4850b1b934c31c1268d98dd4e8790749be4979ec 100644 (file)
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -58,9 +58,19 @@
 
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 1) \
+       func(MMC, mmc, 2)
+
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
-       "script=boot.scr\0" \
+       BOOTENV \
+       "scriptaddr=0x43500000\0" \
+       "kernel_addr_r=0x40880000\0" \
        "image=Image\0" \
        "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \
        "fdt_addr=0x43000000\0"                 \
@@ -68,59 +78,8 @@
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
        "initrd_addr=0x43800000\0"              \
        "bootm_size=0x10000000\0" \
-       "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-       "mmcautodetect=yes\0" \
-       "mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
-       "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-               "source\0" \
-       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-       "mmcboot=echo Booting from mmc ...; " \
-               "run mmcargs; " \
-               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-                       "if run loadfdt; then " \
-                               "booti ${loadaddr} - ${fdt_addr}; " \
-                       "else " \
-                               "echo WARN: Cannot load the DT; " \
-                       "fi; " \
-               "else " \
-                       "echo wait for boot; " \
-               "fi;\0" \
-       "netargs=setenv bootargs ${jh_clk} console=${console} " \
-               "root=/dev/nfs " \
-               "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-       "netboot=echo Booting from net ...; " \
-               "run netargs;  " \
-               "if test ${ip_dyn} = yes; then " \
-                       "setenv get_cmd dhcp; " \
-               "else " \
-                       "setenv get_cmd tftp; " \
-               "fi; " \
-               "${get_cmd} ${loadaddr} ${image}; " \
-               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-                       "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-                               "booti ${loadaddr} - ${fdt_addr}; " \
-                       "else " \
-                               "echo WARN: Cannot load the DT; " \
-                       "fi; " \
-               "else " \
-                       "booti; " \
-               "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-          "mmc dev ${mmcdev}; if mmc rescan; then " \
-                  "if run loadbootscript; then " \
-                          "run bootscript; " \
-                  "else " \
-                          "if run loadimage; then " \
-                                  "run mmcboot; " \
-                          "else run netboot; " \
-                          "fi; " \
-                  "fi; " \
-          "else booti ${loadaddr} - ${fdt_addr}; fi"
 
 /* Link Definitions */
 #define CONFIG_LOADADDR                        0x40480000