]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
board: rockchip: Add FriendlyElec NanoPi R6S
authorSebastian Kropatsch <seb-dev@mail.de>
Thu, 11 Jul 2024 10:15:18 +0000 (12:15 +0200)
committerKever Yang <kever.yang@rock-chips.com>
Wed, 17 Jul 2024 06:48:18 +0000 (14:48 +0800)
The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage,
one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0
Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC
connector, a fan connector, IR receiver as well as some buttons and LEDs.

Add initial support for this board using the upstream devicetree sources.

Kernel commit:
f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi [new file with mode: 0644]
arch/arm/mach-rockchip/rk3588/Kconfig
board/friendlyelec/nanopi-r6s-rk3588s/Kconfig [new file with mode: 0644]
board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS [new file with mode: 0644]
configs/nanopi-r6s-rk3588s_defconfig [new file with mode: 0644]
doc/board/rockchip/rockchip.rst
include/configs/nanopi-r6s-rk3588s.h [new file with mode: 0644]

diff --git a/arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi b/arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
new file mode 100644 (file)
index 0000000..853ed58
--- /dev/null
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588s-u-boot.dtsi"
index 26e45f43ffb735905c7b759737769a3415932f65..e751d64e1a1b59d41ed8942f8042963453111bd7 100644 (file)
@@ -90,6 +90,18 @@ config TARGET_NANOPI_R6C_RK3588S
          Type-A port, a HDMI port, a 30-pin GPIO header as well as some
          buttons and LEDs.
 
+config TARGET_NANOPI_R6S_RK3588S
+       bool "FriendlyElec NanoPi R6S"
+       select BOARD_LATE_INIT
+       help
+         The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip
+         RK3588s.
+         It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC
+         storage, one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports,
+         one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a
+         12-pin GPIO FPC connector, a fan connector, IR receiver as well
+         as some buttons and LEDs.
+
 config TARGET_NOVA_RK3588
        bool "Indiedroid Nova RK3588"
        select BOARD_LATE_INIT
@@ -301,6 +313,7 @@ source "board/armsom/sige7-rk3588/Kconfig"
 source "board/edgeble/neural-compute-module-6/Kconfig"
 source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
 source "board/friendlyelec/nanopi-r6c-rk3588s/Kconfig"
+source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig"
 source "board/indiedroid/nova/Kconfig"
 source "board/pine64/quartzpro64-rk3588/Kconfig"
 source "board/turing/turing-rk1-rk3588/Kconfig"
diff --git a/board/friendlyelec/nanopi-r6s-rk3588s/Kconfig b/board/friendlyelec/nanopi-r6s-rk3588s/Kconfig
new file mode 100644 (file)
index 0000000..4d57981
--- /dev/null
@@ -0,0 +1,12 @@
+if TARGET_NANOPI_R6S_RK3588S
+
+config SYS_BOARD
+       default "nanopi-r6s-rk3588s"
+
+config SYS_VENDOR
+       default "friendlyelec"
+
+config SYS_CONFIG_NAME
+       default "nanopi-r6s-rk3588s"
+
+endif
diff --git a/board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS b/board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS
new file mode 100644 (file)
index 0000000..76288b4
--- /dev/null
@@ -0,0 +1,7 @@
+NANOPI-R6S
+M:     Sebastian Kropatsch <seb-dev@mail.de>
+S:     Maintained
+F:     arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
+F:     board/friendlyelec/nanopi-r6s-rk3588s
+F:     configs/nanopi-r6s-rk3588s_defconfig
+F:     include/configs/nanopi-r6s-rk3588s.h
diff --git a/configs/nanopi-r6s-rk3588s_defconfig b/configs/nanopi-r6s-rk3588s_defconfig
new file mode 100644 (file)
index 0000000..f7b3646
--- /dev/null
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-nanopi-r6s"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_NANOPI_R6S_RK3588S=y
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-nanopi-r6s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+# CONFIG_SPI_FLASH is not set
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
index fb8520b9f62ae9ae2203f7c5e67a287ccfd035a6..bedc52e03e204a625abdb6c8dc247db331f9d911 100644 (file)
@@ -124,6 +124,7 @@ List of mainline supported Rockchip boards:
      - Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)
      - FriendlyElec NanoPC-T6 (nanopc-t6-rk3588)
      - FriendlyElec NanoPi R6C (nanopi-r6c-rk3588s)
+     - FriendlyElec NanoPi R6S (nanopi-r6s-rk3588s)
      - Generic RK3588S/RK3588 (generic-rk3588)
      - Indiedroid Nova (nova-rk3588s)
      - Pine64 QuartzPro64 (quartzpro64-rk3588)
diff --git a/include/configs/nanopi-r6s-rk3588s.h b/include/configs/nanopi-r6s-rk3588s.h
new file mode 100644 (file)
index 0000000..a1b1978
--- /dev/null
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __NANOPI_R6S_RK3588S_H
+#define __NANOPI_R6S_RK3588S_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+               "stdout=serial,vidconsole\0" \
+               "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __NANOPI_R6S_RK3588S_H */