serial: zynq: Read information about clock from DT

Read information about clock frequency from DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>

diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 66d54e32ab3884df382ba452889d686236dc1fdf..4f6e7e442fa2288f5e4d502302f9c5ac3ad0c968 100644 (file)
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -5,6 +5,7 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
+#include <clk.h>
 #include <common.h>
 #include <debug_uart.h>
 #include <dm.h>
@@ -108,8 +109,33 @@ static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c)
 int zynq_serial_setbrg(struct udevice *dev, int baudrate)
 {
        struct zynq_uart_priv *priv = dev_get_priv(dev);
-       unsigned long clock = get_uart_clk(0);
+       unsigned long clock;
 
+#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK)
+       int ret;
+       struct clk clk;
+
+       ret = clk_get_by_index(dev, 0, &clk);
+       if (ret < 0) {
+               dev_err(dev, "failed to get clock\n");
+               return ret;
+       }
+
+       clock = clk_get_rate(&clk);
+       if (IS_ERR_VALUE(clock)) {
+               dev_err(dev, "failed to get rate\n");
+               return clock;
+       }
+       debug("%s: CLK %ld\n", __func__, clock);
+
+       ret = clk_enable(&clk);
+       if (ret && ret != -ENOSYS) {
+               dev_err(dev, "failed to enable clock\n");
+               return ret;
+       }
+#else
+       clock = get_uart_clk(0);
+#endif
        _uart_zynq_serial_setbrg(priv->regs, clock, baudrate);
 
        return 0;