]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm64: dts: rockchip: Add Radxa ROCK S0
authorJonas Karlman <jonas@kwiboo.se>
Tue, 30 Jul 2024 19:48:36 +0000 (19:48 +0000)
committerKever Yang <kever.yang@rock-chips.com>
Fri, 9 Aug 2024 10:35:23 +0000 (18:35 +0800)
Radxa ROCK S0 is a single-board computer based on the Rockchip RK3308B
SoC in an ultra-compact form factor.

Add initial support for eMMC, SD-card, Ethernet, WiFi/BT and USB.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521212247.1240226-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: adeb5d2a4ba47910238b3c4f5fd960cc0c26a98b ]

(cherry picked from commit e291d457b0378f2cb3d3ebb597032ca862cdb973)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts [new file with mode: 0644]

diff --git a/dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts b/dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts
new file mode 100644 (file)
index 0000000..bd6419a
--- /dev/null
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3308.dtsi"
+
+/ {
+       model = "Radxa ROCK S0";
+       compatible = "radxa,rock-s0", "rockchip,rk3308";
+
+       aliases {
+               ethernet0 = &gmac;
+               mmc0 = &emmc;
+               mmc1 = &sdmmc;
+               mmc2 = &sdio;
+       };
+
+       chosen {
+               stdout-path = "serial0:1500000n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwr_led>;
+
+               led-green {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "on";
+                       function = LED_FUNCTION_HEARTBEAT;
+                       gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       vdd_log: regulator-1v04-vdd-log {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd_log";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <1040000>;
+               regulator-max-microvolt = <1040000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc_ddr: regulator-1v5-vcc-ddr {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_ddr";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <1500000>;
+               regulator-max-microvolt = <1500000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc_1v8: regulator-1v8-vcc {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_1v8";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc_io>;
+       };
+
+       vcc_io: regulator-3v3-vcc-io {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_io";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc5v0_sys: regulator-5v0-vcc-sys {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       vdd_core: regulator-vdd-core {
+               compatible = "pwm-regulator";
+               pwms = <&pwm0 0 5000 1>;
+               pwm-supply = <&vcc5v0_sys>;
+               regulator-name = "vdd_core";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <827000>;
+               regulator-max-microvolt = <1340000>;
+               regulator-settling-time-up-us = <250>;
+       };
+
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_reg_on>;
+               reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+       cap-mmc-highspeed;
+       no-sd;
+       no-sdio;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>;
+       vmmc-supply = <&vcc_io>;
+       status = "okay";
+};
+
+&gmac {
+       clock_in_out = "output";
+       phy-handle = <&rtl8201f>;
+       phy-supply = <&vcc_io>;
+       status = "okay";
+
+       mdio {
+               compatible = "snps,dwmac-mdio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               rtl8201f: ethernet-phy@1 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <1>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mac_rst>;
+                       reset-assert-us = <20000>;
+                       reset-deassert-us = <50000>;
+                       reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&io_domains {
+       vccio0-supply = <&vcc_io>;
+       vccio1-supply = <&vcc_io>;
+       vccio2-supply = <&vcc_io>;
+       vccio3-supply = <&vcc_io>;
+       vccio4-supply = <&vcc_1v8>;
+       vccio5-supply = <&vcc_io>;
+       status = "okay";
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&rtc_32k>;
+
+       bluetooth {
+               bt_reg_on: bt-reg-on {
+                       rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               bt_wake_host: bt-wake-host {
+                       rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+
+               host_wake_bt: host-wake-bt {
+                       rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       gmac {
+               mac_rst: mac-rst {
+                       rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       leds {
+               pwr_led: pwr-led {
+                       rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       wifi {
+               wifi_reg_on: wifi-reg-on {
+                       rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               wifi_wake_host: wifi-wake-host {
+                       rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+       };
+};
+
+&pwm0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pwm0_pin_pull_down>;
+       status = "okay";
+};
+
+&saradc {
+       vref-supply = <&vcc_1v8>;
+       status = "okay";
+};
+
+&sdio {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       cap-sd-highspeed;
+       cap-sdio-irq;
+       keep-power-in-suspend;
+       max-frequency = <50000000>;
+       mmc-pwrseq = <&sdio_pwrseq>;
+       no-mmc;
+       no-sd;
+       non-removable;
+       vmmc-supply = <&vcc_io>;
+       vqmmc-supply = <&vcc_1v8>;
+       status = "okay";
+
+       brcmf: wifi@1 {
+               compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+               reg = <1>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "host-wake";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_wake_host>;
+       };
+};
+
+&sdmmc {
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       disable-wp;
+       vmmc-supply = <&vcc_io>;
+       status = "okay";
+};
+
+&u2phy {
+       status = "okay";
+};
+
+&u2phy_host {
+       status = "okay";
+};
+
+&u2phy_otg {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_xfer>;
+       status = "okay";
+};
+
+&uart4 {
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43430a1-bt";
+               clocks = <&cru SCLK_RTC32K>;
+               clock-names = "lpo";
+               interrupt-parent = <&gpio4>;
+               interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "host-wakeup";
+               device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+               shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+               vbat-supply = <&vcc_io>;
+               vddio-supply = <&vcc_1v8>;
+       };
+};
+
+&usb_host_ehci {
+       status = "okay";
+};
+
+&usb_host_ohci {
+       status = "okay";
+};
+
+&usb20_otg {
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&wdt {
+       status = "okay";
+};