board/qualcomm: add debug config fragments for some SoCs

We already have some documentation describing how to enable debug UART
for Qualcomm SoCs. However the UART address varies per-soc... Add some
config fragments to enable debug UART for few well supported SoCs.

These can be used like:

$ make qcom_defconfig debug-sdm845.config

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

diff --git a/board/qualcomm/debug-sdm845.config b/board/qualcomm/debug-sdm845.config
new file mode 100644 (file)
index 0000000..31ad6d0
--- /dev/null
+++ b/board/qualcomm/debug-sdm845.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0xa84000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=7372800

diff --git a/board/qualcomm/debug-sm6115.config b/board/qualcomm/debug-sm6115.config
new file mode 100644 (file)
index 0000000..131c6e2
--- /dev/null
+++ b/board/qualcomm/debug-sm6115.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0x4a90000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600

diff --git a/board/qualcomm/debug-sm8250.config b/board/qualcomm/debug-sm8250.config
new file mode 100644 (file)
index 0000000..4d3cc4c
--- /dev/null
+++ b/board/qualcomm/debug-sm8250.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0xa90000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600