From df0a5b880d6e53b62ea05b483243dd8675cf4648 Mon Sep 17 00:00:00 2001
From: Wang Huan <b18965@freescale.com>
Date: Fri, 5 Sep 2014 13:52:35 +0800
Subject: [PATCH] ls102xa: i2c: Add i2c support for LS102xA
The existing i.MX's I2C driver mxc_i2c.c is compatible
with the controller of LS102xA. As I2C's registers
are 8-bit on LS102xA, I2C_QUIRK_REG is enabled to
use 8-bit driver.
This patch is to add I2C 1,2,3 support for LS102xA.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
---
drivers/i2c/mxc_i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index c14797ce0e..021b2fe511 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -423,7 +423,7 @@ static void * const i2c_bases[] = {
(void *)IMX_I2C2_BASE
#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
- defined(CONFIG_MX6)
+ defined(CONFIG_MX6) || defined(CONFIG_LS102XA)
(void *)I2C1_BASE_ADDR,
(void *)I2C2_BASE_ADDR,
(void *)I2C3_BASE_ADDR
@@ -545,7 +545,7 @@ U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
CONFIG_SYS_MXC_I2C2_SLAVE, 1)
#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
- defined(CONFIG_MX6)
+ defined(CONFIG_MX6) || defined(CONFIG_LS102XA)
U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
--
2.39.5