From: Jonas Karlman Date: Mon, 22 Apr 2024 06:28:43 +0000 (+0000) Subject: rockchip: rk3566-anbernic-rgxx3: Remove SPL_ROCKCHIP_BACK_TO_BROM option X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B?a=commitdiff_plain;h=b8d51666822e2bcfcb363f3bf5105fbb2257f8a9;p=u-boot.git rockchip: rk3566-anbernic-rgxx3: Remove SPL_ROCKCHIP_BACK_TO_BROM option SPL_ROCKCHIP_BACK_TO_BROM should normally only be enabled when BROM should load U-Boot binary. SPL on Anbernic RGxx3 devices load TF-A and U-Boot proper from FIT images and does never jump back to BROM from SPL. Remove the superfluous Kconfig option from defconfig to align with other RK356x boards. This patch have no intended change in boot behavior. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig index c8c9238f96..24b050c59b 100644 --- a/configs/anbernic-rgxx3-rk3566_defconfig +++ b/configs/anbernic-rgxx3-rk3566_defconfig @@ -6,9 +6,7 @@ CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=2 CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y -CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y CONFIG_DEBUG_UART_BASE=0xFE660000