From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Date: Mon, 5 Jan 2015 17:13:38 +0000 (+0100)
Subject: config_distro_bootcmd: Scan all partitions for boot files
X-Git-Tag: v2025.01-rc5-pxa1908~13852
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B?a=commitdiff_plain;h=735b1cfeb2308d9114af1140b703be91b604c09e;p=u-boot.git

config_distro_bootcmd: Scan all partitions for boot files

Not all devices use the convention that the boot scripts are on the
first partition. For example on chromebooks it seems common for the
first two partitions to be ChromeOS kernel partitions.

So instead of just the first partition scan all partitions on a device
with a filesystem u-boot can recognize.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
---

diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index becbe3fa7c..676b351017 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -13,7 +13,7 @@
 #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
 		"if " #devtypel " dev ${devnum}; then " \
 			"setenv devtype " #devtypel "; " \
-			"run scan_dev_for_boot; " \
+			"run scan_dev_for_boot_part; " \
 		"fi\0"
 
 #define BOOTENV_SHARED_BLKDEV(devtypel) \
@@ -155,7 +155,6 @@
 	"boot_prefixes=/ /boot/\0" \
 	"boot_scripts=boot.scr.uimg boot.scr\0" \
 	BOOTENV_BOOT_TARGETS \
-	"bootpart=1\0" \
 	\
 	"boot_extlinux="                                                  \
 		"sysboot ${devtype} ${devnum}:${bootpart} any "           \
@@ -186,12 +185,21 @@
 		"done\0"                                                  \
 	\
 	"scan_dev_for_boot="                                              \
-		"echo Scanning ${devtype} ${devnum}...; "                 \
+		"echo Scanning ${devtype} ${devnum}:${bootpart}...; "     \
 		"for prefix in ${boot_prefixes}; do "                     \
 			"run scan_dev_for_extlinux; "                     \
 			"run scan_dev_for_scripts; "                      \
 		"done\0"                                                  \
 	\
+	"scan_dev_for_boot_part="                                         \
+		"part list ${devtype} ${devnum} devplist; "               \
+		"for bootpart in ${devplist}; do "                        \
+			"if fstype ${devtype} ${devnum}:${bootpart} "     \
+					"bootfstype; then "               \
+				"run scan_dev_for_boot; "                 \
+			"fi; "                                            \
+		"done\0"                                                  \
+	\
 	BOOT_TARGET_DEVICES(BOOTENV_DEV)                                  \
 	\
 	"bootcmd=" BOOTENV_SET_SCSI_NEED_INIT                             \