From: Andrew Davis <afd@ti.com>
Date: Fri, 15 Jul 2022 15:25:26 +0000 (-0500)
Subject: arm: mach-k3: Only build init files for SPL
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B?a=commitdiff_plain;h=46da163b723e5623b50df946aa5f9627567397bf;p=u-boot.git

arm: mach-k3: Only build init files for SPL

The content of these files are only used in SPL builds. The contents are
already ifdef for the same, remove that and only include the whole file
in the build when building for SPL.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
index 8459bef93b..e17ad22141 100644
--- a/arch/arm/mach-k3/Makefile
+++ b/arch/arm/mach-k3/Makefile
@@ -3,16 +3,19 @@
 # Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
 #	Lokesh Vutla <lokeshvutla@ti.com>
 
-obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
-obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o j721e/ j7200/
-obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o j721s2/
-obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
-obj-$(CONFIG_SOC_K3_AM625) += am625_init.o am62x/
+obj-$(CONFIG_SOC_K3_J721E) += j721e/ j7200/
+obj-$(CONFIG_SOC_K3_J721S2) += j721s2/
+obj-$(CONFIG_SOC_K3_AM625) += am62x/
 obj-$(CONFIG_ARM64) += arm64-mmu.o
 obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
 obj-$(CONFIG_TI_SECURE_DEVICE) += security.o
 obj-$(CONFIG_ARM64) += cache.o
 ifeq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
+obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o
+obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o
+obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
+obj-$(CONFIG_SOC_K3_AM625) += am625_init.o
 obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o
 endif
 obj-y += common.o
diff --git a/arch/arm/mach-k3/am625_init.c b/arch/arm/mach-k3/am625_init.c
index dfd95b8053..8c4b3491b1 100644
--- a/arch/arm/mach-k3/am625_init.c
+++ b/arch/arm/mach-k3/am625_init.c
@@ -15,8 +15,6 @@
 #include <dm/uclass-internal.h>
 #include <dm/pinctrl.h>
 
-#if defined(CONFIG_SPL_BUILD)
-
 /*
  * This uninitialized global variable would normal end up in the .bss section,
  * but the .bss is cleared between writing and reading this variable, so move
@@ -290,5 +288,3 @@ u32 spl_boot_device(void)
 
 	return bootmedia;
 }
-
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index b16de9c9f0..8428322ed9 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -23,7 +23,6 @@
 #include <mmc.h>
 #include <dm/root.h>
 
-#if defined(CONFIG_SPL_BUILD)
 #define MCU_CTRL_MMR0_BASE			0x04500000
 #define CTRLMMR_MCU_RST_CTRL			0x04518170
 
@@ -348,7 +347,6 @@ u32 spl_boot_device(void)
 	else
 		return __get_backup_bootmedia(devstat);
 }
-#endif
 
 #if defined(CONFIG_SYS_K3_SPL_ATF)
 
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index 7992918adc..6e833a6641 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -26,7 +26,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_SPL_BUILD
 #ifdef CONFIG_K3_LOAD_SYSFW
 #ifdef CONFIG_TI_SECURE_DEVICE
 struct fwl_data main_cbass_fwls[] = {
@@ -359,7 +358,6 @@ u32 spl_boot_device(void)
 	else
 		return __get_backup_bootmedia(devstat);
 }
-#endif
 
 #ifdef CONFIG_SYS_K3_SPL_ATF
 
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index e56ca6d0f5..cb9f7eebec 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -24,7 +24,6 @@
 #include <mmc.h>
 #include <remoteproc.h>
 
-#ifdef CONFIG_SPL_BUILD
 #ifdef CONFIG_K3_LOAD_SYSFW
 #ifdef CONFIG_TI_SECURE_DEVICE
 struct fwl_data cbass_hc_cfg0_fwls[] = {
@@ -384,7 +383,6 @@ u32 spl_boot_device(void)
 	else
 		return __get_backup_bootmedia(main_devstat);
 }
-#endif
 
 #ifdef CONFIG_SYS_K3_SPL_ATF
 
diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c
index 2e64e44a80..12da8136f9 100644
--- a/arch/arm/mach-k3/j721s2_init.c
+++ b/arch/arm/mach-k3/j721s2_init.c
@@ -22,8 +22,6 @@
 #include <mmc.h>
 #include <remoteproc.h>
 
-#ifdef CONFIG_SPL_BUILD
-
 static void ctrl_mmr_unlock(void)
 {
 	/* Unlock all WKUP_CTRL_MMR0 module registers */
@@ -255,7 +253,6 @@ u32 spl_boot_device(void)
 	else
 		return __get_backup_bootmedia(main_devstat);
 }
-#endif
 
 #define J721S2_DEV_MCU_RTI0			295
 #define J721S2_DEV_MCU_RTI1			296