From: Marek Vasut Date: Mon, 27 Feb 2023 22:49:28 +0000 (+0100) Subject: mmc: renesas-sdhi: Add proper probe error fail path X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=f20a61af4209785721bdee96131785d9dc24698d;p=u-boot.git mmc: renesas-sdhi: Add proper probe error fail path In case one of the calls in probe fail, trigger a fail path and undo all the steps done in probe until the point of failure. The current implementation failed to stop controller clock and free claimed clock, so fix that. Furthermore, print return code in error prints for easier debugging. Signed-off-by: Marek Vasut --- diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index 2473261f3c..34119f949a 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -982,37 +982,45 @@ static int renesas_sdhi_probe(struct udevice *dev) } else { ret = clk_set_rate(&priv->clkh, 800000000); if (ret < 0) { - dev_err(dev, "failed to set rate for SDnH clock\n"); - clk_free(&priv->clk); - return ret; + dev_err(dev, "failed to set rate for SDnH clock (%d)\n", ret); + goto err_clk; } } /* set to max rate */ ret = clk_set_rate(&priv->clk, 200000000); if (ret < 0) { - dev_err(dev, "failed to set rate for host clock\n"); - clk_free(&priv->clk); - return ret; + dev_err(dev, "failed to set rate for SDn clock (%d)\n", ret); + goto err_clkh; } ret = clk_enable(&priv->clk); if (ret) { - dev_err(dev, "failed to enable host clock\n"); - return ret; + dev_err(dev, "failed to enable SDn clock (%d)\n", ret); + goto err_clkh; } priv->quirks = quirks; ret = tmio_sd_probe(dev, quirks); + if (ret) + goto err_tmio_probe; renesas_sdhi_filter_caps(dev); #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \ CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \ CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) - if (!ret && (priv->caps & TMIO_SD_CAP_RCAR_UHS)) + if (priv->caps & TMIO_SD_CAP_RCAR_UHS) renesas_sdhi_reset_tuning(priv); #endif + return 0; + +err_tmio_probe: + clk_disable(&priv->clk); +err_clkh: + clk_free(&priv->clkh); +err_clk: + clk_free(&priv->clk); return ret; }