From: Abel Vesa <abel.vesa@nxp.com>
Date: Fri, 1 Feb 2019 16:40:11 +0000 (+0000)
Subject: mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=d76706c89adea229d2207b0280d1f3fb559671e4;p=u-boot.git

mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

Since the fsl_esdhc will also be used by SPL, make the
preprocessor switches more generic to allow any kind of build.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
---

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 21fa2ab1d4..9e34557d16 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 	case MMC_SIGNAL_VOLTAGE_330:
 		if (priv->vs18_enable)
 			return -EIO;
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 3300000);
 			if (ret) {
@@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 1800000);
 			if (ret) {
@@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	int node = dev_of_offset(dev);
 	struct esdhc_soc_data *data =
 		(struct esdhc_soc_data *)dev_get_driver_data(dev);
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice *vqmmc_dev;
 #endif
 	fdt_addr_t addr;
@@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	priv->vs18_enable = 0;
 
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	/*
 	 * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
 	 * otherwise, emmc will work abnormally.