From: Jonas Karlman Date: Tue, 12 Mar 2024 23:36:20 +0000 (+0000) Subject: rockchip: theobroma-systems: puma: Migrate to use IO-domain driver X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=95a9cb3666c4a513d03a64b7233ab32bfb042f0a;p=u-boot.git rockchip: theobroma-systems: puma: Migrate to use IO-domain driver Switch to use the IO-domain driver to configure IO-domain based on device tree instead of a setup_iodomain() function. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 8b998ef455..eeb8a99231 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -3,31 +3,10 @@ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH */ -#include -#include -#include -#include -#include -#include #include "../common/common.h" -static void setup_iodomain(void) -{ - const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3; - struct rk3399_grf_regs *grf = - syscon_get_first_range(ROCKCHIP_SYSCON_GRF); - - /* - * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6). - * Linux assumes that PCIE_RST# works out of the box as it probes - * PCIe before loading the iodomain driver. - */ - rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT); -} - int rockchip_early_misc_init_r(void) { - setup_iodomain(); setup_boottargets(); return 0; diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 7e76ec5076..c2759e1a95 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -66,6 +66,7 @@ CONFIG_GPIO_HOG=y CONFIG_SPL_GPIO_HOG=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y