From: Dave Gerlach Date: Tue, 16 May 2023 04:54:37 +0000 (+0530) Subject: arm: mach-k3: Increase SYSFW max image size X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=895b8b6768eea970e975b9d4a28cd42e7643c848;p=u-boot.git arm: mach-k3: Increase SYSFW max image size When booting with HS silicon, the system firmware image is 278270, which is slightly larger than currently allocated amount. This can cause unexpected behavior if this overlap interferes with other things in memory, so increase this with a slightly margin added as well to avoid any boot issues that can appear after system firmware gets loaded. Signed-off-by: Dave Gerlach Signed-off-by: Tero Kristo Signed-off-by: Manorit Chawdhry Reviewed-by: Dhruva Gole --- diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 0991b42423..bae0a827c2 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -141,8 +141,7 @@ config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART config K3_SYSFW_IMAGE_SIZE_MAX int "Amount of memory dynamically allocated for loading SYSFW blob" depends on K3_LOAD_SYSFW - default 163840 if SOC_K3_AM625 || SOC_K3_AM62A7 - default 278000 + default 280000 help Amount of memory (in bytes) reserved through dynamic allocation at runtime for loading the combined System Firmware and configuration image