From: Linus Walleij Date: Fri, 11 Oct 2024 14:49:56 +0000 (+0200) Subject: board: bcm96846: Enable NAND options X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=4c6f2ab29a27c9efd349dbe9d86c9e3c3d6f65bb;p=u-boot.git board: bcm96846: Enable NAND options This adds reasonable NAND options to the BCM96846 reference design: - CMD_NAND, MTD_RAW_NAND - Disable SYS_NAND_ONFI_DETECTION as this just give error messages - MTD, MTDPARTS with DM and related config options - CMD_UBI and CMD_UBIFS as this is likely used with ubi/ubifs What I didn't add was something like the following: CONFIG_MTDPARTS_DEFAULT="nand0:256k(cfi),257024k(image)" Because I don't actually have a BCM96846 reference design. These are only available to Broadcom and their customers I think, but perhaps the people at Broadcom can provide the detail of the flash layout for BCM96846 so we can add this too so the bcm96846_config is usable out of the box. Signed-off-by: Linus Walleij --- diff --git a/configs/bcm96846_defconfig b/configs/bcm96846_defconfig index ea643eddcc..2f94bd2951 100644 --- a/configs/bcm96846_defconfig +++ b/configs/bcm96846_defconfig @@ -18,5 +18,17 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CACHE=y +CONFIG_CMD_NAND=y +CONFIG_CMD_UBI=y +CONFIG_CMD_UBIFS=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_MTDPARTS=y CONFIG_OF_EMBED=y CONFIG_CLK=y +CONFIG_MTD=y +CONFIG_MTDIDS_DEFAULT="nand0=nand0" +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 +CONFIG_SYS_NAND_ONFI_DETECTION=n