From: Heinrich Schuchardt Date: Wed, 25 Jan 2023 18:40:16 +0000 (+0100) Subject: usb: move CONFIG_USB_HUB_DEBOUNCE_TIMEOUT to USB X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=4042ce73c8bee9077d80a42b27aa21f98636b780;p=u-boot.git usb: move CONFIG_USB_HUB_DEBOUNCE_TIMEOUT to USB This configuration setting is only relevant if the board supports USB. It should not be in the main menu but in the USB menu. The setting is only relevant in USB host mode. Fixes: 5454dea3137d ("usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT") Signed-off-by: Heinrich Schuchardt Reviewed-by: Marek Vasut Reviewed-by: Patrick Delaunay --- diff --git a/common/Kconfig b/common/Kconfig index e3a5e1be1e..0afc01b759 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1106,15 +1106,3 @@ config FDT_SIMPLEFB config IO_TRACE bool - -config USB_HUB_DEBOUNCE_TIMEOUT - int "Timeout in milliseconds for USB HUB connection" - depends on USB - default 1000 - help - Value in milliseconds of the USB connection timeout, the max delay to - wait the hub port status to be connected steadily after being powered - off and powered on in the usb hub driver. - This define allows to increase the HUB_DEBOUNCE_TIMEOUT default - value = 1s because some usb device needs around 1.5s to be initialized - and a 2s value should solve detection issue on problematic USB keys. diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index ebe6bf9498..94fb32d107 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -115,6 +115,17 @@ config USB_ONBOARD_HUB power regulator. An example for such a hub is the Microchip USB2514B. +config USB_HUB_DEBOUNCE_TIMEOUT + int "Timeout in milliseconds for USB HUB connection" + default 1000 + help + Value in milliseconds of the USB connection timeout, the max delay to + wait the hub port status to be connected steadily after being powered + off and powered on in the usb hub driver. + This define allows to increase the HUB_DEBOUNCE_TIMEOUT default + value = 1s because some usb device needs around 1.5s to be initialized + and a 2s value should solve detection issue on problematic USB keys. + if USB_KEYBOARD config USB_KEYBOARD_FN_KEYS