From: Marek Vasut Date: Thu, 14 Feb 2019 14:16:15 +0000 (+0100) Subject: mmc: tmio: sdhi: Configure DT2FF register for HS400 mode X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=261445dfafdce252f91fea16517aba5830dd1930;p=u-boot.git mmc: tmio: sdhi: Configure DT2FF register for HS400 mode The DT2FF register must be configured differently for HS400 mode and for HS200/SDR104 mode. Configure the DT2FF register according to the recommended datasheet settings for each mode. Signed-off-by: Marek Vasut Cc: Masahiro Yamada --- diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index a556acd5cb..923f846370 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -148,6 +148,9 @@ static int renesas_sdhi_hs400(struct udevice *dev) tmio_sd_writel(priv, priv->tap_set, RENESAS_SDHI_SCC_TAPSET); } + tmio_sd_writel(priv, hs400 ? 0x704 : 0x300, + RENESAS_SDHI_SCC_DT2FF); + reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_CKSEL); reg |= RENESAS_SDHI_SCC_CKSEL_DTSEL; tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_CKSEL);