From: Primoz Fiser Date: Tue, 30 Jan 2024 12:43:37 +0000 (+0100) Subject: imx9: clock: Fix board_interface_eth_init for FEC X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=259e1012713f788dc595c5a6960520d48c1bbf1b;p=u-boot.git imx9: clock: Fix board_interface_eth_init for FEC Commit d5eae216d833 ("net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93") implemented board_interface_eth_init for i.MX9 platforms. However it only accounted for the EQOS interface while any board using FEC as primary Ethernet interface was left out as return value -EINVAL is always returned from the function in such case. Fix this by returning 0 (success) when FEC interface is primarily used instead of EQOS interface on i.MX93. Fixes: d5eae216d833 ("net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93") Signed-off-by: Primoz Fiser Tested-by: Mathieu Othacehe --- diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index 92c41e9a67..75d92af036 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -882,6 +882,11 @@ int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type device_is_compatible(dev, "nxp,imx93-dwmac-eqos")) return imx93_eqos_interface_init(dev, interface_type); + if (IS_ENABLED(CONFIG_IMX93) && + IS_ENABLED(CONFIG_FEC_MXC) && + device_is_compatible(dev, "fsl,imx93-fec")) + return 0; + return -EINVAL; }