From: Jonas Karlman <jonas@kwiboo.se>
Date: Mon, 22 Apr 2024 06:29:03 +0000 (+0000)
Subject: rockchip: rk3588-generic: Use M0 iomux for UART2
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=674cffd88e12af0dd5f12312e8d9b56cae0d7db1;p=u-boot.git

rockchip: rk3588-generic: Use M0 iomux for UART2

The default pinctrl for UART2 is using M1 iomux, however, all other
supported RK3588 boards in U-Boot use M0 iomux for UART2.

Change to use the M0 pinctrl for UART2 to match other supported boards.

Fixes: b54c3d0dd69b ("rockchip: board: Add minimal generic RK3588S/RK3588 board")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3588-generic.dts b/arch/arm/dts/rk3588-generic.dts
index e4721d97a8..baafe7463f 100644
--- a/arch/arm/dts/rk3588-generic.dts
+++ b/arch/arm/dts/rk3588-generic.dts
@@ -40,5 +40,6 @@
 };
 
 &uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
 };