From: Tim Harvey Date: Mon, 4 Feb 2019 21:10:57 +0000 (-0800) Subject: imx: ventana: add support for GW5909 X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=2285094ea91f361abdfc764826957ec99f1c6f23;p=u-boot.git imx: ventana: add support for GW5909 The GW5909 is a small single board computer based on the i.MX6DL SoC with the same peripheral set as the GW5904 but with half the DRAM loaded and an additional RS232 transceiver off UART2. Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 568dc920ae..c1e2e8a506 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -455,6 +455,8 @@ static iomux_v3_cfg_t const gw5904_gpio_pads[] = { IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG), /* M2_RST# */ IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG), + /* RS232_EN# */ + IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), }; static iomux_v3_cfg_t const gw5905_gpio_pads[] = { @@ -1133,6 +1135,23 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .msata_en = GP_MSATA_SEL, .rs232_en = GP_RS232_EN, }, + + /* GW5909 */ + { + .gpio_pads = gw5904_gpio_pads, + .num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2, + .dio_cfg = gw5904_dio, + .dio_num = ARRAY_SIZE(gw5904_dio), + .leds = { + IMX_GPIO_NR(4, 6), + IMX_GPIO_NR(4, 7), + IMX_GPIO_NR(4, 15), + }, + .pcie_rst = IMX_GPIO_NR(1, 0), + .mezz_pwren = IMX_GPIO_NR(2, 19), + .mezz_irq = IMX_GPIO_NR(2, 18), + .otgpwr_en = IMX_GPIO_NR(3, 22), + }, }; #define SETUP_GPIO_OUTPUT(gpio, name, level) \ @@ -1275,6 +1294,7 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info) gpio_request(IMX_GPIO_NR(1, 7) , "bklt_12ven"); gpio_direction_output(IMX_GPIO_NR(1, 7), 1); break; + case GW5909: case GW5904: gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#"); gpio_direction_output(IMX_GPIO_NR(5, 11), 1); @@ -1553,6 +1573,7 @@ int board_mmc_init(bd_t *bis) return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); case GW5904: case GW5905: + case GW5909: /* usdhc3: 8bit eMMC */ SETUP_IOMUX_PADS(gw5904_emmc_pads); usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; @@ -1582,6 +1603,7 @@ int board_mmc_getcd(struct mmc *mmc) case GW5903: case GW5904: case GW5905: + case GW5909: /* emmc is always present */ if (cfg->esdhc_base == USDHC3_BASE_ADDR) return 1; diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index 85802141dd..bcd634920c 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -109,6 +109,8 @@ read_eeprom(int bus, struct ventana_board_info *info) type = GW5907; else if (info->model[4] == '0' && info->model[5] == '8') type = GW5908; + else if (info->model[4] == '0' && info->model[5] == '9') + type = GW5909; break; } return type; diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h index c80dfa1f7a..3e24287fe7 100644 --- a/board/gateworks/gw_ventana/ventana_eeprom.h +++ b/board/gateworks/gw_ventana/ventana_eeprom.h @@ -118,6 +118,7 @@ enum { GW5906, GW5907, GW5908, + GW5909, GW_UNKNOWN, GW_BADCRC, };