From: Duje Mihanović Date: Tue, 17 Dec 2024 20:17:10 +0000 (+0100) Subject: initial support X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=1f750fa6ff86f6c1af76305d84b970ed24d1dece;p=u-boot.git initial support This makes the screen gray, implying lowlevel_init() at least is reached. --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7282c4123b..71084d8aae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -841,6 +841,12 @@ config ARCH_MEDIATEK Support for the MediaTek SoCs family developed by MediaTek Inc. Please refer to doc/README.mediatek for more information. +config ARCH_MMP + bool "Marvell MMP" + select ARM64 + select DM + select DM_SERIAL + config ARCH_LPC32XX bool "NXP LPC32xx platform" select CPU_ARM926EJS @@ -2320,6 +2326,8 @@ source "arch/arm/mach-meson/Kconfig" source "arch/arm/mach-mediatek/Kconfig" +source "arch/arm/mach-mmp/Kconfig" + source "arch/arm/mach-qemu/Kconfig" source "arch/arm/mach-rockchip/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index cb87a68475..7334e79965 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -69,6 +69,7 @@ machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MESON) += meson +machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_NEXELL) += nexell machine-$(CONFIG_ARCH_NPCM) += npcm diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6ad59aeed5..9848e13a7a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ +dtb-$(CONFIG_TARGET_COREPRIMEVELTE) += pxa1908-samsung-coreprimevelte.dtb + dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb diff --git a/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts b/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts new file mode 100644 index 0000000000..5749b5f568 --- /dev/null +++ b/arch/arm/dts/pxa1908-samsung-coreprimevelte.dts @@ -0,0 +1,602 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "pxa1908.dtsi" +#include +#include + +/ { + pxa,rev-id = <3928 2>; + model = "Samsung Galaxy Core Prime VE LTE"; + compatible = "samsung,coreprimevelte", "marvell,pxa1908"; + + aliases { + mmc0 = &sdh2; /* eMMC */ + mmc1 = &sdh0; /* SD card */ + mmc2 = &sdh1; /* SDIO */ + serial0 = &uart0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + /* S-Boot places the initramfs here */ + linux,initrd-start = <0x4d70000>; + linux,initrd-end = <0x5000000>; + + fb0: framebuffer@17177000 { + compatible = "simple-framebuffer"; + reg = <0 0x17177000 0 (480 * 800 * 4)>; + width = <480>; + height = <800>; + stride = <(480 * 4)>; + format = "a8r8g8b8"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x1000000 0 0x1f000000>, + <0 0x20000000 0 0x20000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@17000000 { + reg = <0 0x17000000 0 0x1800000>; + no-map; + }; + + gpu@9000000 { + reg = <0 0x9000000 0 0x1000000>; + }; + + /* Communications processor, aka modem */ + cp@5000000 { + reg = <0 0x5000000 0 0x3000000>; + }; + + cm3@a000000 { + reg = <0 0xa000000 0 0x80000>; + }; + + seclog@8000000 { + reg = <0 0x8000000 0 0x100000>; + }; + + ramoops@8100000 { + compatible = "ramoops"; + reg = <0 0x8100000 0 0x40000>; + record-size = <0x8000>; + console-size = <0x20000>; + max-reason = <5>; + }; + }; + + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <3>; + i2c-gpio,timeout-ms = <100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_muic_pins>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + autorepeat; + + key-home { + label = "Home"; + linux,code = ; + gpios = <&gpio 50 GPIO_ACTIVE_LOW>; + }; + + key-volup { + label = "Volume Up"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + key-voldown { + label = "Volume Down"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; + + backlight { + compatible = "kinetic,ktd2801"; + ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + max-brightness = <210>; + }; + + wlan_pwrseq: pwrseq0 { + compatible = "mmc-pwrseq-simple"; + powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm 100000>; + enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pins>; + }; +}; + +&smmu { + status = "okay"; +}; + +&pmx { + pinctrl-single,gpio-range = <&range 55 55 0>, + <&range 110 32 0>, + <&range 52 1 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&board_pins_1 &board_pins_2 &board_pins_3>; + + board_pins_1: pinmux-board-1 { + pinctrl-single,pins = < + 0x160 0 + 0x164 0 + 0x168 0 + 0x16c 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + board_pins_2: pinmux-board-2 { + pinctrl-single,pins = < + 0x44 1 + 0x48 1 + 0x20 1 + 0x18 1 + 0x14 1 + 0x10 1 + 0xc 1 + 0x8 1 + 0x68 1 + 0x58 0 + 0x54 0 + 0x7c 0 + 0x6c 0 + 0x70 0 + 0x4c 1 + 0x50 1 + 0xac 0 + 0x90 0 + 0x8c 0 + 0x88 0 + 0x84 0 + 0xc8 0 + 0x128 0 + 0x190 0 + 0x194 0 + 0x1a0 0 + 0x114 0 + 0x118 0 + 0x1d8 0 + 0x1e4 0 + 0xe8 0 + 0x100 0 + 0x204 0 + 0x210 0 + 0x218 0 + >; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + board_pins_3: pinmux-board-3 { + pinctrl-single,pins = < + 0x260 0 + 0x264 0 + 0x268 0 + 0x26c 0 + 0x270 0 + 0x274 0 + 0x78 0 + 0x74 0 + 0xb0 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + uart0_pins: pinmux-uart0 { + pinctrl-single,pins = < + 0x198 6 + 0x19c 6 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + gpio_keys_pins: pinmux-gpio-keys { + pinctrl-single,pins = < + 0x11c 0 + 0x120 0 + 0x1a4 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + i2c_muic_pins: pinmux-i2c-muic { + pinctrl-single,pins = < + 0x154 0 + 0x150 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + sdh0_pins_1: pinmux-sdh0-1 { + pinctrl-single,pins = < + 0x108 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh0_pins_2: pinmux-sdh0-2 { + pinctrl-single,pins = < + 0x94 0 + 0x98 0 + 0x9c 0 + 0xa0 0 + 0xa4 0 + >; + pinctrl-single,drive-strength = <0x800 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh0_pins_3: pinmux-sdh0-3 { + pinctrl-single,pins = < + 0xa8 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh1_pins_1: pinmux-sdh1-1 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_pins_2: pinmux-sdh1-2 { + pinctrl-single,pins = <0x184 1>; + pinctrl-single,drive-strength = <0x800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh1_pins_3: pinmux-sdh1-3 { + pinctrl-single,pins = <0xec 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_edge_wakeup: pinmux-sdh1-edge-wakeup { + pinctrl-single,pins = <0x178 1>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0x30 0x30>; + pinctrl-single,input-schmitt-enable = <0 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_pins_1_fast: pinmux-sdh1-1-fast { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_pins_2_fast: pinmux-sdh1-2-fast { + pinctrl-single,pins = < + 0x184 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_1: pinmux-sdh2-1 { + pinctrl-single,pins = < + 0x24 1 + 0x28 1 + 0x2c 1 + 0x30 1 + 0x34 1 + 0x38 1 + 0x3c 1 + 0x40 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh2_pins_2: pinmux-sdh2-2 { + pinctrl-single,pins = <0x64 1>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_3: pinmux-sdh2-3 { + pinctrl-single,pins = <0x5c 1>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + sdh2_pins_1_fast: pinmux-sdh2-1-fast { + pinctrl-single,pins = < + 0x24 1 + 0x28 1 + 0x2c 1 + 0x30 1 + 0x34 1 + 0x38 1 + 0x3c 1 + 0x40 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh2_pins_2_fast: pinmux-sdh2-2-fast { + pinctrl-single,pins = <0x64 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_3_fast: pinmux-sdh2-3-fast { + pinctrl-single,pins = <0x5c 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + vibrator_pins: pinmux-vibrator { + pinctrl-single,pins = <0x12c 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>; + pinctrl-single,bias-pulldown = <0xa000 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&twsi0 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; +}; + +&twsi2 { + status = "okay"; + + pmic@30 { + compatible = "marvell,88pm886-a1"; + reg = <0x30>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <1>; + + onkey { + compatible = "marvell,88pm88x-onkey"; + wakeup-source; + }; + + regulators { + ldo2: ldo2 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; + + ldo15: ldo15 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck2: buck2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&twsi3 { + status = "okay"; + + touchscreen@50 { + compatible = "imagis,ist3032c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <72 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + linux,code = , ; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; +}; + +&sdh2 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh2_pins_1 &sdh2_pins_2 &sdh2_pins_3>; + pinctrl-1 = <&sdh2_pins_1_fast &sdh2_pins_2_fast &sdh2_pins_3_fast>; + bus-width = <8>; + non-removable; + mmc-ddr-1_8v; +}; + +&sdh0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdh0_pins_1 &sdh0_pins_2 &sdh0_pins_3>; + cd-gpios = <&gpio 11 0>; + cd-inverted; + bus-width = <4>; + wp-inverted; +}; + +&sdh1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh1_pins_1 &sdh1_pins_2 &sdh1_pins_3>; + pinctrl-1 = <&sdh1_pins_1_fast &sdh1_pins_2_fast &sdh1_pins_3>; + pinctrl-2 = <&sdh1_edge_wakeup>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + vmmc-supply = <&ldo15>; + vqmmc-supply = <&buck2>; + mmc-pwrseq = <&wlan_pwrseq>; + non-removable; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + + mwifiex: wifi@1 { + compatible = "marvell,sd8777"; + reg = <1>; + interrupt-parent = <&gpio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = <3>; + }; + + btmrvl: bluetooth@2 { + compatible = "marvell,sd8777-bt"; + reg = <2>; + interrupt-parent = <&gpio>; + interrupts = <40 IRQ_TYPE_LEVEL_LOW>; + + marvell,cal-data = /bits/ 8 < + 0x00 0x1c 0xfa 0x37 0xff 0xff 0xff 0xff 0x00 0x0d 0x7f 0x01 + 0xce 0xba 0x00 0x00 0x00 0x2d 0xc6 0xc0 0x00 0x00 0x00 0x00 + 0x00 0xf0 0x00 0x00>; + }; +}; diff --git a/arch/arm/dts/pxa1908.dtsi b/arch/arm/dts/pxa1908.dtsi new file mode 100644 index 0000000000..b0c9f80d78 --- /dev/null +++ b/arch/arm/dts/pxa1908.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include +#include + +/ { + model = "Marvell Armada PXA1908"; + compatible = "marvell,pxa1908"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 3>; + enable-method = "psci"; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smmu: iommu@c0010000 { + compatible = "arm,mmu-400"; + reg = <0 0xc0010000 0 0x10000>; + #global-interrupts = <1>; + #iommu-cells = <1>; + interrupts = , + ; + status = "disabled"; + }; + + gic: interrupt-controller@d1df9000 { + compatible = "arm,gic-400"; + reg = <0 0xd1df9000 0 0x1000>, + <0 0xd1dfa000 0 0x2000>, + /* The subsequent registers are guesses. */ + <0 0xd1dfc000 0 0x2000>, + <0 0xd1dfe000 0 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apb@d4000000 { + compatible = "simple-bus"; + reg = <0 0xd4000000 0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xd4000000 0x200000>; + + pdma: dma-controller@0 { + compatible = "marvell,pdma-1.0"; + reg = <0 0x10000>; + interrupts = ; + dma-channels = <30>; + #dma-cells = <2>; + }; + + twsi1: i2c@10800 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10800 0x64>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_TWSI1>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi0: i2c@11000 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11000 0x64>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_TWSI0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi3: i2c@13800 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x13800 0x64>; + interrupts = ; + clocks = <&apbc PXA1908_CLK_TWSI3>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + apbc: clock-controller@15000 { + compatible = "marvell,pxa1908-apbc"; + reg = <0x15000 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@17000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart", "ns16550"; + reg = <0x17000 0x1000>; + interrupts = ; + clock-frequency = <14745600>; + reg-shift = <2>; + }; + + uart1: serial@18000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart", "ns16550"; + reg = <0x18000 0x1000>; + interrupts = ; + clock-frequency = <14745600>; + reg-shift = <2>; + }; + + gpio: gpio@19000 { + compatible = "marvell,mmp-gpio"; + reg = <0x19000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&apbc PXA1908_CLK_GPIO>; + interrupts = ; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <2>; + ranges = <0 0x19000 0x800>; + + gpio@0 { + reg = <0x0 0x4>; + }; + + gpio@4 { + reg = <0x4 0x4>; + }; + + gpio@8 { + reg = <0x8 0x4>; + }; + + gpio@100 { + reg = <0x100 0x4>; + }; + }; + + pwm: pwm@1ac00 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1ac00 0x10>; + #pwm-cells = <1>; + clocks = <&apbc PXA1908_CLK_PWM3>; + }; + + pmx: pinmux@1e000 { + compatible = "marvell,pxa1908-padconf", "pinconf-single"; + reg = <0x1e000 0x330>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + uart2: serial@36000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart", "ns16550"; + reg = <0x36000 0x1000>; + interrupts = ; + clock-frequency = <117000000>; + reg-shift = <2>; + }; + + twsi2: i2c@37000 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x37000 0x64>; + interrupts = ; + clocks = <&apbcp PXA1908_CLK_TWSI2>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + apbcp: clock-controller@3b000 { + compatible = "marvell,pxa1908-apbcp"; + reg = <0x3b000 0x1000>; + #clock-cells = <1>; + }; + + mpmu: clock-controller@50000 { + compatible = "marvell,pxa1908-mpmu"; + reg = <0x50000 0x1000>; + #clock-cells = <1>; + }; + }; + + axi@d4200000 { + compatible = "simple-bus"; + reg = <0 0xd4200000 0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xd4200000 0x200000>; + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0x200>; + clocks = <&apmu PXA1908_CLK_USB>; + #phy-cells = <0>; + }; + + usb: usb@8000 { + compatible = "chipidea,usb2"; + reg = <0x8000 0x200>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_USB>; + phys = <&usbphy>; + phy-names = "usb-phy"; + }; + + sdh0: mmc@80000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x80000 0x120>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_SDH0>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + sdh1: mmc@80800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x80800 0x120>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_SDH1>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + sdh2: mmc@81000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x81000 0x120>; + interrupts = ; + clocks = <&apmu PXA1908_CLK_SDH2>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + apmu: clock-controller@82800 { + compatible = "marvell,pxa1908-apmu"; + reg = <0x82800 0x400>; + #clock-cells = <1>; + }; + }; + }; +}; diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig new file mode 100644 index 0000000000..c01ec4344d --- /dev/null +++ b/arch/arm/mach-mmp/Kconfig @@ -0,0 +1,12 @@ +if ARCH_MMP + +config TARGET_COREPRIMEVELTE + bool "coreprimevelte" + select LINUX_KERNEL_IMAGE_HEADER + +config LNX_KRNL_IMG_TEXT_OFFSET_BASE + default TEXT_BASE + +source "board/samsung/coreprimevelte/Kconfig" + +endif diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile new file mode 100644 index 0000000000..294e6c518f --- /dev/null +++ b/arch/arm/mach-mmp/Makefile @@ -0,0 +1 @@ +obj-y += mmu.o diff --git a/arch/arm/mach-mmp/mmu.c b/arch/arm/mach-mmp/mmu.c new file mode 100644 index 0000000000..10f1ee2c83 --- /dev/null +++ b/arch/arm/mach-mmp/mmu.c @@ -0,0 +1,26 @@ +#include +#include +#include + +static struct mm_region pxa1908_mem_map[] = { + { + .virt = 0x0UL, + .phys = 0x0UL, + .size = 2UL * SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, + { + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = 2UL * SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_INNER_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, + { + 0, + } +}; + +struct mm_region *mem_map = pxa1908_mem_map; diff --git a/board/samsung/coreprimevelte/Kconfig b/board/samsung/coreprimevelte/Kconfig new file mode 100644 index 0000000000..78a8037960 --- /dev/null +++ b/board/samsung/coreprimevelte/Kconfig @@ -0,0 +1,12 @@ +if TARGET_COREPRIMEVELTE + +config SYS_BOARD + default "coreprimevelte" + +config SYS_VENDOR + default "samsung" + +config SYS_CONFIG_NAME + default "pxa1908" + +endif diff --git a/board/samsung/coreprimevelte/Makefile b/board/samsung/coreprimevelte/Makefile new file mode 100644 index 0000000000..9fb98228b8 --- /dev/null +++ b/board/samsung/coreprimevelte/Makefile @@ -0,0 +1 @@ +obj-y += coreprimevelte.o diff --git a/board/samsung/coreprimevelte/coreprimevelte.c b/board/samsung/coreprimevelte/coreprimevelte.c new file mode 100644 index 0000000000..d7ed86aee3 --- /dev/null +++ b/board/samsung/coreprimevelte/coreprimevelte.c @@ -0,0 +1,37 @@ +#include +#include +#include + +void lowlevel_init(void) +{ + debug_uart_init(); + printascii(__func__); + for (int *i = (int *) 0x17200000; i < 0x17200000 + 0x177000; i++) + *i = 0x77777777; +} + +int board_init(void) +{ + printascii("Reached board_init()\n"); + + u32 tmp = readl(0xd4015064); + if ((tmp >> 16) != 0x319) + return -1; + + writel(tmp | 1, 0xd4015064); + writel(3, 0xd4101000); + + return 0; +} + +int dram_init(void) +{ + if (fdtdec_setup_mem_size_base() != 0) + printascii("fdtdec_setup_mem_size_base() has failed\n"); + + return 0; +} + +void reset_cpu(void) +{ +} diff --git a/configs/coreprimevelte_defconfig b/configs/coreprimevelte_defconfig new file mode 100644 index 0000000000..524450b65b --- /dev/null +++ b/configs/coreprimevelte_defconfig @@ -0,0 +1,28 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=26000000 +CONFIG_DRIVER_GICV2=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_MMP=y +CONFIG_TEXT_BASE=0x1010000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_DEFAULT_DEVICE_TREE="pxa1908-samsung-coreprimevelte" +CONFIG_TARGET_COREPRIMEVELTE=y +CONFIG_SYS_LOAD_ADDR=0x1010000 +CONFIG_DEBUG_UART_BASE=0xd4017000 +CONFIG_DEBUG_UART_CLOCK=14745600 +CONFIG_ARMV8_PSCI=y +CONFIG_DEBUG_UART=y +CONFIG_LOCALVERSION="pxa1908" +CONFIG_FIT=y +CONFIG_LOG=y +CONFIG_OF_CONTROL=y +CONFIG_NO_NET=y +CONFIG_CLK=y +CONFIG_CPU=y +CONFIG_CPU_ARMV8=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_SYS_NS16550=y +CONFIG_SYS_NS16550_MEM32=y +CONFIG_MBEDTLS_LIB=y +# CONFIG_TOOLS_MKEFICAPSULE is not set diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 3f6860f391..7772c2e9f1 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -108,9 +108,7 @@ static inline int serial_in_shift(void *addr, int shift) static void serial_out_dynamic(struct ns16550_plat *plat, u8 *addr, int value) { - if (plat->flags & NS16550_FLAG_IO) { - outb(value, addr); - } else if (plat->reg_width == 4) { + if (plat->reg_width == 4) { if (plat->flags & NS16550_FLAG_ENDIAN) { if (plat->flags & NS16550_FLAG_BE) out_be32(addr, value); @@ -128,9 +126,7 @@ static void serial_out_dynamic(struct ns16550_plat *plat, u8 *addr, static int serial_in_dynamic(struct ns16550_plat *plat, u8 *addr) { - if (plat->flags & NS16550_FLAG_IO) { - return inb(addr); - } else if (plat->reg_width == 4) { + if (plat->reg_width == 4) { if (plat->flags & NS16550_FLAG_ENDIAN) { if (plat->flags & NS16550_FLAG_BE) return in_be32(addr); diff --git a/include/configs/pxa1908.h b/include/configs/pxa1908.h new file mode 100644 index 0000000000..190032e90f --- /dev/null +++ b/include/configs/pxa1908.h @@ -0,0 +1,3 @@ +#define CFG_SYS_SDRAM_BASE 0x01000000 +#define CFG_SYS_INIT_RAM_ADDR 0x17177000 +#define CFG_SYS_INIT_RAM_SIZE 0x4000 diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h new file mode 100644 index 0000000000..fb15b0d0cd --- /dev/null +++ b/include/dt-bindings/clock/marvell,pxa1908.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +#ifndef __DTS_MARVELL_PXA1908_CLOCK_H +#define __DTS_MARVELL_PXA1908_CLOCK_H + +/* plls */ +#define PXA1908_CLK_CLK32 1 +#define PXA1908_CLK_VCTCXO 2 +#define PXA1908_CLK_PLL1_624 3 +#define PXA1908_CLK_PLL1_416 4 +#define PXA1908_CLK_PLL1_499 5 +#define PXA1908_CLK_PLL1_832 6 +#define PXA1908_CLK_PLL1_1248 7 +#define PXA1908_CLK_PLL1_D2 8 +#define PXA1908_CLK_PLL1_D4 9 +#define PXA1908_CLK_PLL1_D8 10 +#define PXA1908_CLK_PLL1_D16 11 +#define PXA1908_CLK_PLL1_D6 12 +#define PXA1908_CLK_PLL1_D12 13 +#define PXA1908_CLK_PLL1_D24 14 +#define PXA1908_CLK_PLL1_D48 15 +#define PXA1908_CLK_PLL1_D96 16 +#define PXA1908_CLK_PLL1_D13 17 +#define PXA1908_CLK_PLL1_32 18 +#define PXA1908_CLK_PLL1_208 19 +#define PXA1908_CLK_PLL1_117 20 +#define PXA1908_CLK_PLL1_416_GATE 21 +#define PXA1908_CLK_PLL1_624_GATE 22 +#define PXA1908_CLK_PLL1_832_GATE 23 +#define PXA1908_CLK_PLL1_1248_GATE 24 +#define PXA1908_CLK_PLL1_D2_GATE 25 +#define PXA1908_CLK_PLL1_499_EN 26 +#define PXA1908_CLK_PLL2VCO 27 +#define PXA1908_CLK_PLL2 28 +#define PXA1908_CLK_PLL2P 29 +#define PXA1908_CLK_PLL2VCODIV3 30 +#define PXA1908_CLK_PLL3VCO 31 +#define PXA1908_CLK_PLL3 32 +#define PXA1908_CLK_PLL3P 33 +#define PXA1908_CLK_PLL3VCODIV3 34 +#define PXA1908_CLK_PLL4VCO 35 +#define PXA1908_CLK_PLL4 36 +#define PXA1908_CLK_PLL4P 37 +#define PXA1908_CLK_PLL4VCODIV3 38 + +/* apb (apbc) peripherals */ +#define PXA1908_CLK_UART0 1 +#define PXA1908_CLK_UART1 2 +#define PXA1908_CLK_GPIO 3 +#define PXA1908_CLK_PWM0 4 +#define PXA1908_CLK_PWM1 5 +#define PXA1908_CLK_PWM2 6 +#define PXA1908_CLK_PWM3 7 +#define PXA1908_CLK_SSP0 8 +#define PXA1908_CLK_SSP1 9 +#define PXA1908_CLK_IPC_RST 10 +#define PXA1908_CLK_RTC 11 +#define PXA1908_CLK_TWSI0 12 +#define PXA1908_CLK_KPC 13 +#define PXA1908_CLK_SWJTAG 14 +#define PXA1908_CLK_SSP2 15 +#define PXA1908_CLK_TWSI1 16 +#define PXA1908_CLK_THERMAL 17 +#define PXA1908_CLK_TWSI3 18 + +/* apb (apbcp) peripherals */ +#define PXA1908_CLK_UART2 1 +#define PXA1908_CLK_TWSI2 2 +#define PXA1908_CLK_AICER 3 + +/* axi (apmu) peripherals */ +#define PXA1908_CLK_CCIC1 1 +#define PXA1908_CLK_ISP 2 +#define PXA1908_CLK_DSI1 3 +#define PXA1908_CLK_DISP1 4 +#define PXA1908_CLK_CCIC0 5 +#define PXA1908_CLK_SDH0 6 +#define PXA1908_CLK_SDH1 7 +#define PXA1908_CLK_USB 8 +#define PXA1908_CLK_NF 9 +#define PXA1908_CLK_CORE_DEBUG 10 +#define PXA1908_CLK_VPU 11 +#define PXA1908_CLK_GC 12 +#define PXA1908_CLK_SDH2 13 +#define PXA1908_CLK_GC2D 14 +#define PXA1908_CLK_TRACE 15 +#define PXA1908_CLK_DVC_DFC_DEBUG 16 + +#endif