From: Sean Anderson Date: Tue, 15 Sep 2020 14:44:43 +0000 (-0400) Subject: mtd: spi: Fix logging in spi-nor-tiny X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24style.Permalink%20%7D%7D?a=commitdiff_plain;h=8985e1cf91db9826508a48ceb0ae764a81ea10c4;p=u-boot.git mtd: spi: Fix logging in spi-nor-tiny This fixes dev_xxx() not always being called with a device. In spi_nor_reg_read, a the slave device may not always be available, so we use bus and cs instead. Signed-off-by: Sean Anderson Tested-by: Patrick Delaunay --- diff --git a/drivers/mtd/spi/spi-nor-tiny.c b/drivers/mtd/spi/spi-nor-tiny.c index fa26ea33c8..07c8c7b82b 100644 --- a/drivers/mtd/spi/spi-nor-tiny.c +++ b/drivers/mtd/spi/spi-nor-tiny.c @@ -55,9 +55,19 @@ static int spi_nor_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) int ret; ret = spi_nor_read_write_reg(nor, &op, val); - if (ret < 0) - dev_dbg(&flash->spimem->spi->dev, "error %d reading %x\n", ret, + if (ret < 0) { + /* + * spi_slave does not have a struct udevice member without DM, + * so use the bus and cs instead. + */ +#if CONFIG_IS_ENABLED(DM_SPI) + dev_dbg(nor->spi->dev, "error %d reading %x\n", ret, code); +#else + log_debug("spi%u.%u: error %d reading %x\n", + nor->spi->bus, nor->spi->cs, ret, code); +#endif + } return ret; } @@ -512,7 +522,8 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) /* Check current Quad Enable bit value. */ ret = read_cr(nor); if (ret < 0) { - dev_dbg(dev, "error while reading configuration register\n"); + dev_dbg(nor->dev, + "error while reading configuration register\n"); return -EINVAL; } @@ -524,7 +535,7 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) /* Keep the current value of the Status Register. */ ret = read_sr(nor); if (ret < 0) { - dev_dbg(dev, "error while reading status register\n"); + dev_dbg(nor->dev, "error while reading status register\n"); return -EINVAL; } sr_cr[0] = ret; @@ -785,7 +796,7 @@ int spi_nor_scan(struct spi_nor *nor) } if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { - dev_dbg(dev, "address width is too large: %u\n", + dev_dbg(nor->dev, "address width is too large: %u\n", nor->addr_width); return -EINVAL; }