From: Ioana Ciornei Date: Wed, 18 Mar 2020 14:47:36 +0000 (+0200) Subject: drivers: net: add Layerscape mEMAC MDIO driver X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24style.Permalink%20%7D%7D?a=commitdiff_plain;h=52e16ec6136424bc40727a9e43f23d718ae0c9db;p=u-boot.git drivers: net: add Layerscape mEMAC MDIO driver Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei Reviewed-by: Priyanka Jain --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4d1013c984..bc518f218d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -640,4 +640,11 @@ config MVMDIO This driver is used by the MVPP2 and MVNETA drivers. +config FSL_LS_MDIO + bool "NXP Layerscape MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and + on the mEMAC (which supports both Clauses 22 and 45). + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6e0a68834d..6d9b8772b1 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -83,3 +83,4 @@ obj-y += mscc_eswitch/ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o +obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o diff --git a/drivers/net/fsl_ls_mdio.c b/drivers/net/fsl_ls_mdio.c new file mode 100644 index 0000000000..6d8332d19a --- /dev/null +++ b/drivers/net/fsl_ls_mdio.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN +#define memac_out_32(a, v) out_le32(a, v) +#define memac_clrbits_32(a, v) clrbits_le32(a, v) +#define memac_setbits_32(a, v) setbits_le32(a, v) +#else +#define memac_out_32(a, v) out_be32(a, v) +#define memac_clrbits_32(a, v) clrbits_be32(a, v) +#define memac_setbits_32(a, v) setbits_be32(a, v) +#endif + +static u32 memac_in_32(u32 *reg) +{ +#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN + return in_le32(reg); +#else + return in_be32(reg); +#endif +} + +struct fsl_ls_mdio_priv { + void *regs_base; +}; + +static u32 fsl_ls_mdio_setup_operation(struct udevice *dev, int addr, int devad, + int reg) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + u32 mdio_ctl; + u32 c45 = 1; + + regs = (struct memac_mdio_controller *)(priv->regs_base); + if (devad == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + devad = reg & 0x1f; + memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + memac_setbits_32(®s->mdio_stat, MDIO_STAT_ENC); + } + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(addr) | MDIO_CTL_DEV_ADDR(devad); + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + memac_out_32(®s->mdio_addr, reg & 0xffff); + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + return mdio_ctl; +} + +static int dm_fsl_ls_mdio_read(struct udevice *dev, int addr, + int devad, int reg) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + u32 mdio_ctl; + + regs = (struct memac_mdio_controller *)(priv->regs_base); + mdio_ctl = fsl_ls_mdio_setup_operation(dev, addr, devad, reg); + + /* Initiate the read */ + mdio_ctl |= MDIO_CTL_READ; + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the MDIO write is complete */ + while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + /* Return all Fs if nothing was there */ + if (memac_in_32(®s->mdio_stat) & MDIO_STAT_RD_ER) + return 0xffff; + + return memac_in_32(®s->mdio_data) & 0xffff; +} + +static int dm_fsl_ls_mdio_write(struct udevice *dev, int addr, int devad, + int reg, u16 val) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + + regs = (struct memac_mdio_controller *)(priv->regs_base); + fsl_ls_mdio_setup_operation(dev, addr, devad, reg); + + /* Write the value to the register */ + memac_out_32(®s->mdio_data, MDIO_DATA(val)); + + /* Wait till the MDIO write is complete */ + while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + return 0; +} + +static const struct mdio_ops fsl_ls_mdio_ops = { + .read = dm_fsl_ls_mdio_read, + .write = dm_fsl_ls_mdio_write, +}; + +static int fsl_ls_mdio_probe(struct udevice *dev) +{ + struct fsl_ls_mdio_priv *priv = dev_get_priv(dev); + struct memac_mdio_controller *regs; + + priv->regs_base = dev_read_addr_ptr(dev); + regs = (struct memac_mdio_controller *)(priv->regs_base); + + memac_setbits_32(®s->mdio_stat, + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); + + return 0; +} + +static const struct udevice_id fsl_ls_mdio_of_ids[] = { + { .compatible = "fsl,ls-mdio" }, +}; + +U_BOOT_DRIVER(fsl_ls_mdio) = { + .name = "fsl_ls_mdio", + .id = UCLASS_MDIO, + .of_match = fsl_ls_mdio_of_ids, + .probe = fsl_ls_mdio_probe, + .ops = &fsl_ls_mdio_ops, + .priv_auto_alloc_size = sizeof(struct fsl_ls_mdio_priv), +};