From: Tony Dinh Date: Thu, 21 Nov 2024 19:02:27 +0000 (-0800) Subject: arm: kirkwood: Enable bootstd for Sheevaplug board X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=96ca3147981ab1bdd10426a3d2792e1d99bad321;p=u-boot.git arm: kirkwood: Enable bootstd for Sheevaplug board Enable bootstd for Sheevaplug board. Remove JFFS2 support. See JFFS2 Vulnerability[1]. Enable LTO to keep board size within limit. Move default envs to text-base environment [1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b Signed-off-by: Tony Dinh Reviewed-by: Stefan Roese --- diff --git a/board/Marvell/sheevaplug/sheevaplug.env b/board/Marvell/sheevaplug/sheevaplug.env new file mode 100644 index 0000000000..bcd62dbeb7 --- /dev/null +++ b/board/Marvell/sheevaplug/sheevaplug.env @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2024 Tony Dinh + * + * Environment variables configurations + */ + +kernel_addr_r=0x800000 +fdt_addr_r=0x2c00000 +ramdisk_addr_r=0x01100000 +scriptaddr=0x200000 +fdtfile=CONFIG_DEFAULT_DEVICE_TREE.dtb +mtdparts=CONFIG_MTDPARTS_DEFAULT +console=ttyS0,115200 + +/* Standard Boot */ +bootcmd= + bootflow scan -lb +failed= + echo CONFIG_SYS_BOARD boot failed - please check your image diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 9ac40b9e57..a7f6c73ecb 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -16,16 +16,14 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-sheevaplug" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" +CONFIG_LTO=y CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=524288 +CONFIG_BOOTSTD_FULL=y CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=32 -CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set @@ -35,19 +33,10 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SATA=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y @@ -68,6 +57,5 @@ CONFIG_DM_RTC=y CONFIG_RTC_MV=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y CONFIG_LZMA=y CONFIG_BZIP2=y diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 4e0b3c663c..0a5f23e4c8 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -12,13 +12,4 @@ #include "mv-common.h" -/* - * Environment variables configurations - */ -#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - #endif /* _CONFIG_SHEEVAPLUG_H */