From: Suman Anna <s-anna@ti.com>
Date: Mon, 17 Aug 2020 23:15:11 +0000 (-0500)
Subject: arm: dts: k3-j7200-main: Add MAIN domain R5F cluster nodes
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=3f7e032f70da685f8b5e76c0ad7577033e996044;p=u-boot.git

arm: dts: k3-j7200-main: Add MAIN domain R5F cluster nodes

The J7200 SoCs have 2 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster is present within the MCU
domain (MCU_R5FSS0), and the other one is present within the MAIN
domain (MAIN_R5FSS0). Each of these can be configured at boot time
to be either run in a LockStep mode or in an Asymmetric Multi
Processing (AMP) fashion in Split-mode. These subsystems have 64 KB
each Tightly-Coupled Memory (TCM) internal memories for each core
split between two banks - ATCM and BTCM (further interleaved into
two banks). The TCMs of both Cores are combined in LockStep-mode
to provide a larger 128 KB of memory.

Add the DT node for the MAIN domain R5F cluster/subsystem, the two
R5F cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in Split-mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
---

diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
index b485889525..cc3d933cbb 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -17,6 +17,8 @@
 	aliases {
 		remoteproc0 = &mcu_r5fss0_core0;
 		remoteproc1 = &mcu_r5fss0_core1;
+		remoteproc2 = &main_r5fss0_core0;
+		remoteproc3 = &main_r5fss0_core1;
 	};
 };
 
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
index aaa1fdd5a3..c25f03cf23 100644
--- a/arch/arm/dts/k3-j7200-main.dtsi
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -340,4 +340,44 @@
 			dr_mode = "otg";
 		};
 	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j7200-r5fss";
+		lockstep-mode = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xFF>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7200-main-r5f0_0-fw";
+			atcm-enable = <1>;
+			btcm-enable = <1>;
+			loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xFF>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7200-main-r5f0_1-fw";
+			atcm-enable = <1>;
+			btcm-enable = <1>;
+			loczrama = <1>;
+		};
+	};
 };