From: Andrew Goodbody Date: Tue, 15 Oct 2024 12:19:16 +0000 (+0100) Subject: usb: Fix test failure with multiple partitions X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=32e40f3dd8fe0e27c6504f786bd2ce8ca8f894a9;p=u-boot.git usb: Fix test failure with multiple partitions When test_usb_load finds multiple partitions of the same type then it will cause a test failure. The call to write the test file will write a different test file to each partition but only return the name and size of the last one written. So the test then fails to load the test file from the first partition as it uses the name of a file on a different partition. Refactor the code so that only one test file is written at a time and is written to only the partition being tested at that time. This allows the correct file name to always be available to the code that runs the load command. This reduces the number of files written and also the number of calls to crc32 needed. Fixes: 1c5b6edad381 ("test/py: usb: Add tests for USB device") Signed-off-by: Andrew Goodbody Reviewed-by: Love Kumar --- diff --git a/test/py/tests/test_usb.py b/test/py/tests/test_usb.py index fb3d20f082..e7966cad2b 100644 --- a/test/py/tests/test_usb.py +++ b/test/py/tests/test_usb.py @@ -288,6 +288,47 @@ def test_usb_fatls_fatinfo(u_boot_console): if not part_detect: pytest.skip('No %s partition detected' % fs.upper()) +def usb_fatload_fatwrite(u_boot_console, fs, x, part): + addr = u_boot_utils.find_ram_base(u_boot_console) + size = random.randint(4, 1 * 1024 * 1024) + output = u_boot_console.run_command('crc32 %x %x' % (addr, size)) + m = re.search('==> (.+?)', output) + if not m: + pytest.fail('CRC32 failed') + expected_crc32 = m.group(1) + + file = '%s_%d' % ('uboot_test', size) + output = u_boot_console.run_command( + '%swrite usb %d:%s %x %s %x' % (fs, x, part, addr, file, size) + ) + assert 'Unable to write' not in output + assert 'Error' not in output + assert 'overflow' not in output + expected_text = '%d bytes written' % size + assert expected_text in output + + alignment = int( + u_boot_console.config.buildconfig.get( + 'config_sys_cacheline_size', 128 + ) + ) + offset = random.randrange(alignment, 1024, alignment) + output = u_boot_console.run_command( + '%sload usb %d:%s %x %s' % (fs, x, part, addr + offset, file) + ) + assert 'Invalid FAT entry' not in output + assert 'Unable to read file' not in output + assert 'Misaligned buffer address' not in output + expected_text = '%d bytes read' % size + assert expected_text in output + + output = u_boot_console.run_command( + 'crc32 %x $filesize' % (addr + offset) + ) + assert expected_crc32 in output + + return file, size, expected_crc32 + @pytest.mark.buildconfigspec('cmd_usb') @pytest.mark.buildconfigspec('cmd_fat') @pytest.mark.buildconfigspec('cmd_memory') @@ -309,49 +350,11 @@ def test_usb_fatload_fatwrite(u_boot_console): for part in partitions: part_detect = 1 - addr = u_boot_utils.find_ram_base(u_boot_console) - size = random.randint(4, 1 * 1024 * 1024) - output = u_boot_console.run_command('crc32 %x %x' % (addr, size)) - m = re.search('==> (.+?)', output) - if not m: - pytest.fail('CRC32 failed') - expected_crc32 = m.group(1) - - file = '%s_%d' % ('uboot_test', size) - output = u_boot_console.run_command( - '%swrite usb %d:%s %x %s %x' % (fs, x, part, addr, file, size) - ) - assert 'Unable to write' not in output - assert 'Error' not in output - assert 'overflow' not in output - expected_text = '%d bytes written' % size - assert expected_text in output - - alignment = int( - u_boot_console.config.buildconfig.get( - 'config_sys_cacheline_size', 128 - ) - ) - offset = random.randrange(alignment, 1024, alignment) - output = u_boot_console.run_command( - '%sload usb %d:%s %x %s' % (fs, x, part, addr + offset, file) - ) - assert 'Invalid FAT entry' not in output - assert 'Unable to read file' not in output - assert 'Misaligned buffer address' not in output - expected_text = '%d bytes read' % size - assert expected_text in output - - output = u_boot_console.run_command( - 'crc32 %x $filesize' % (addr + offset) - ) - assert expected_crc32 in output + usb_fatload_fatwrite(u_boot_console, fs, x, part) if not part_detect: pytest.skip('No %s partition detected' % fs.upper()) - return file, size - @pytest.mark.buildconfigspec('cmd_usb') @pytest.mark.buildconfigspec('cmd_ext4') def test_usb_ext4ls(u_boot_console): @@ -380,6 +383,39 @@ def test_usb_ext4ls(u_boot_console): if not part_detect: pytest.skip('No %s partition detected' % fs.upper()) +def usb_ext4load_ext4write(u_boot_console, fs, x, part): + addr = u_boot_utils.find_ram_base(u_boot_console) + size = random.randint(4, 1 * 1024 * 1024) + output = u_boot_console.run_command('crc32 %x %x' % (addr, size)) + m = re.search('==> (.+?)', output) + if not m: + pytest.fail('CRC32 failed') + expected_crc32 = m.group(1) + file = '%s_%d' % ('uboot_test', size) + + output = u_boot_console.run_command( + '%swrite usb %d:%s %x /%s %x' % (fs, x, part, addr, file, size) + ) + assert 'Unable to write' not in output + assert 'Error' not in output + assert 'overflow' not in output + expected_text = '%d bytes written' % size + assert expected_text in output + + offset = random.randrange(128, 1024, 128) + output = u_boot_console.run_command( + '%sload usb %d:%s %x /%s' % (fs, x, part, addr + offset, file) + ) + expected_text = '%d bytes read' % size + assert expected_text in output + + output = u_boot_console.run_command( + 'crc32 %x $filesize' % (addr + offset) + ) + assert expected_crc32 in output + + return file, size, expected_crc32 + @pytest.mark.buildconfigspec('cmd_usb') @pytest.mark.buildconfigspec('cmd_ext4') @pytest.mark.buildconfigspec('ext4_write') @@ -402,41 +438,11 @@ def test_usb_ext4load_ext4write(u_boot_console): for part in partitions: part_detect = 1 - addr = u_boot_utils.find_ram_base(u_boot_console) - size = random.randint(4, 1 * 1024 * 1024) - output = u_boot_console.run_command('crc32 %x %x' % (addr, size)) - m = re.search('==> (.+?)', output) - if not m: - pytest.fail('CRC32 failed') - expected_crc32 = m.group(1) - file = '%s_%d' % ('uboot_test', size) - - output = u_boot_console.run_command( - '%swrite usb %d:%s %x /%s %x' % (fs, x, part, addr, file, size) - ) - assert 'Unable to write' not in output - assert 'Error' not in output - assert 'overflow' not in output - expected_text = '%d bytes written' % size - assert expected_text in output - - offset = random.randrange(128, 1024, 128) - output = u_boot_console.run_command( - '%sload usb %d:%s %x /%s' % (fs, x, part, addr + offset, file) - ) - expected_text = '%d bytes read' % size - assert expected_text in output - - output = u_boot_console.run_command( - 'crc32 %x $filesize' % (addr + offset) - ) - assert expected_crc32 in output + usb_ext4load_ext4write(u_boot_console, fs, x, part) if not part_detect: pytest.skip('No %s partition detected' % fs.upper()) - return file, size - @pytest.mark.buildconfigspec('cmd_usb') @pytest.mark.buildconfigspec('cmd_ext2') def test_usb_ext2ls(u_boot_console): @@ -473,7 +479,6 @@ def test_usb_ext2ls(u_boot_console): @pytest.mark.buildconfigspec('cmd_memory') def test_usb_ext2load(u_boot_console): devices, controllers, storage_device = test_usb_part(u_boot_console) - file, size = test_usb_ext4load_ext4write(u_boot_console) if not devices: pytest.skip('No devices detected') @@ -491,12 +496,9 @@ def test_usb_ext2load(u_boot_console): for part in partitions: part_detect = 1 + file, size, expected_crc32 = \ + usb_ext4load_ext4write(u_boot_console, 'ext4', x, part) addr = u_boot_utils.find_ram_base(u_boot_console) - output = u_boot_console.run_command('crc32 %x %x' % (addr, size)) - m = re.search('==> (.+?)', output) - if not m: - pytest.fail('CRC32 failed') - expected_crc32 = m.group(1) offset = random.randrange(128, 1024, 128) output = u_boot_console.run_command( @@ -565,15 +567,11 @@ def test_usb_load(u_boot_console): addr = u_boot_utils.find_ram_base(u_boot_console) if fs == 'fat': - file, size = test_usb_fatload_fatwrite(u_boot_console) + file, size, expected_crc32 = \ + usb_fatload_fatwrite(u_boot_console, fs, x, part) elif fs == 'ext4': - file, size = test_usb_ext4load_ext4write(u_boot_console) - - output = u_boot_console.run_command('crc32 %x %x' % (addr, size)) - m = re.search('==> (.+?)', output) - if not m: - pytest.fail('CRC32 failed') - expected_crc32 = m.group(1) + file, size, expected_crc32 = \ + usb_ext4load_ext4write(u_boot_console, fs, x, part) offset = random.randrange(128, 1024, 128) output = u_boot_console.run_command(