Simon Glass [Thu, 15 Aug 2024 19:57:45 +0000 (13:57 -0600)]
buildman: Allow skipping the dtc build
For most boards, the device-tree compiler is built in-tree, ignoring the
system version. Add a special option to skip this build. This can be
useful when the system dtc is up-to-date, as it speeds up the build.
Simon Glass [Sun, 23 Jun 2024 17:55:14 +0000 (11:55 -0600)]
buildman: Retry the build for current source
Buildman retries a failed build when processing a branch, but does not
do this when building current source. It is useful to do this retry in
both cases, so add the logic for it.
Jonas Karlman [Wed, 24 Jul 2024 22:47:11 +0000 (22:47 +0000)]
power: regulator: Consistently return -ENOSYS when ops is unimplemented
dev_get_driver_ops() may return NULL when the udevice is invalid.
Move the ops check to top of functions to consistently return -ENOSYS
when ops is unimplemented and prevent trying to access uclass plat data,
also add missing NULL checks to suspend ops.
This result in suspend_uV having the value -ENODATA after probe.
This negative voltage, -ENODATA, gets missinterpreted and result in an
unexpected voltage being set by autoset.
E.g. on Radxa ROCK 3A the vcc_ddr regulator by default have a normal and
suspend voltage value of 0.5v. However, due to this missinterpretation
the suspend voltage end up beind set to 0.5625v instead.
Fix this by skip calling regulator_set_suspend_value() in autoset and
also protect calling set value ops when input value is -ENODATA.
Ye Li [Tue, 24 Sep 2024 07:32:00 +0000 (15:32 +0800)]
net: fec_mxc: Skip recv packet process when fec is halted
After FEC is halted by calling fec_halt callback, we should not continue
receiving packet. Otherwise it will process previous pending interrupts
on EIR register and uses wrong rbd index as this has been reset to 0.
The GRA interrupt which is triggered by issuing graceful stop command to
FEC transmitter in fec_halt is processed in this case. It causes wrong
receive buffer descriptors be used by FEC in next time.
Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 24 Sep 2024 07:31:59 +0000 (15:31 +0800)]
net: fec_mxc: Fix clk_ref rate on iMX93
i.MX93 FEC ENET port supports two mode: RGMII and RMII. For RGMII,
there is an internal /2 divider, so the freq needs to set with (*2),
otherwise the speed will not reach 1G and cause communication error
in some network environments. For RMII, the clk path is
ccm -> enet tx_clk pin -> pad loop back to enet, no /2 divider.
So fix for RGMII mode with freq multiplied by 2.
Fixes: 09de565f76b ("net: fec_mxc: support i.MX93") Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Marek Vasut [Tue, 24 Sep 2024 13:02:09 +0000 (15:02 +0200)]
arm64: dts: imx8m: Always name the generated fitImage u-boot.itb
Maintain backward compatibility with pre-binman u-boot file naming,
the U-Boot fitImage used to be named u-boot.itb before, restore the
file name after binman conversion.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
common/update.c (UPDATE_COMMON) depends on tftp_timeout_ms which is
defined in cmd/tftp.c (CMD_TFTPBOOT). Therefore add the appropriate
imply statement to Kconfig.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
net: fec_mxc_init(): do not ignore return status of fec_open()
The fec_mxc_init() function currently always returns 0. This does not
allow the callers to detect when for instance the PHY initialization
failed due to the port being unconnected. Fix that by returning the
status of fec_open().
wget followed by bootefi currently fails as follows:
U-Boot> wget 200000 192.168.0.30:helloworld.efi
Waiting for Ethernet connection... done.
HTTP/1.0 200 OK
Packets received 13, Transfer Successful
Bytes transferred = 12720 (31b0 hex)
U-Boot> bootefi 200000
No UEFI binary known at 200000
U-Boot>
Fix the problem by adding the missing efi_set_bootdev() call.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
FTGMAC100 enables drivers/net/ftgmac100.c which uses
PHY_INTERFACE_MODE_NCSI, which is defined only when PHY_NCSI is enabled.
Therefore FTGMAC100 depends on PHY_NCSI. However adding such a
dependency causes a "recursive dependency detected!" message, so
add a dependency on NET instead (PHY_NCSI depends on NET).
All in all, either the stack is NET and FTGMAC100 can be enabled,
or it is NET_LWIP (or NO_NET) and it cannot.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
PHY_NCSI enables drivers/net/phy/ncsi.c which calls net_loop() and
net_set_timeout_handler(). That's the legacy NET stack (as opposed to
NET_LWIP). Therefore add the dependency to Kconfig.
The AT91-based platforms have a mem_init() function declared in
arch/arm/mach-at91/include/mach/at91_common.h and implemented in various
places. In preparation of the introduction of the lwIP networking library
which also has a global mem_init() function, rename the AT91 one to
at91_mem_init().
Prefix the flash status codes (ERR_*) with FL_ in order to avoid clashes
with third-party libraries. Case in point: including the lwIP library
header file <lwip/err.h> which defines err_enum_t as an enum with values
being ERR_*.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
buildman/toolchain.py: do not set CROSS_COMPILE for sandbox
When building for sandbox, self.cross is empty.
In MakeEnvironment(), CROSS_COMPILE is defined to be self.cross (with
or without a full path), optionally prefixed by the toolchain wrapper
defined in ~/.buildman. This is fine when self.cross is not empty, but
it doesn't make sense when it is:
- Either there is no wrapper and we end up with an empty CROSS_COMPILE
which is the same as not defining it (the host compiler will be used),
- Or there is a wrapper and CROSS_COMPILE will contain only the wrapper
which obviously is not a valid compiler, hence an error.
Test case:
$ sudo apt install ccache
$ grep -q toolchain-wrapper ~/.buildman || \
printf "[toolchain-wrapper]\nwrapper = ccache\n" >>~/.buildman
$ make mrproper
$ ./tools/buildman/buildman sandbox_noinst
$ ./tools/buildman/buildman sandbox_noinst
Building current source for 1 boards (1 thread, 24 jobs per thread)
sandbox: + sandbox_noinst
+arch/sandbox/lib/reloc_sandbox_efi.c:10:15: error: operator '==' has no left operand
+ 10 | #if HOST_ARCH == HOST_ARCH_X86_64
+ | ^~
[...]
The GetEnvArgs function is modified too, since the VAR_CROSS_COMPILE
case has the same issue.
In tools/buildman/test.py, testGetEnvArgs is extended and
testMakeEnvironment is added. They check the 'arm' and 'sandbox'
toolchains, with and without a wrapper.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
When running the bootstage tests currently we get a warning like:
tests/test_bootstage.py::test_bootstage_stash
...PytestReturnNotNoneWarning: Expected None, but tests/test_bootstage.py::test_bootstage_stash returned (37748736, 4096), which will be an error in a future version of pytest. Did you mean to use `assert` in stead of `return`?
This is because the unstash test will run the stash test and fetch the
addr / size from that. Rework the test to be stash and unstash and then
run the unstash command at the end of the current stash test.
Acked-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Love Kumar <love.kumar@amd.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Make SPL_RAM_SUPPORT a hidden Kconfig symbol, automatically selected
by SPL_RAM_DEVICE or SPL_DFU. Avoids the situation where SPL_RAM_SUPPORT
may be enabled without the other two being enabled, which results in the
following build warning:
common/spl/spl_ram.c:19:14: warning: ‘spl_ram_load_read’ defined but not used [-Wunused-function]
19 | static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Marek Vasut [Fri, 6 Sep 2024 17:10:42 +0000 (19:10 +0200)]
mmc: Poll CD in case cyclic framework is enabled
In case the cyclic framework is enabled, poll the card detect of already
initialized cards and deinitialize them in case they are removed. Since
the card initialization is a longer process and card initialization is
done on first access to an uninitialized card anyway, avoid initializing
newly detected uninitialized cards in the cyclic callback.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Added LMB API to prevent SF command from overwriting reserved
memory areas. The current SPI code does not use LMB APIs for
loading data into memory addresses. To resolve this, LMB APIs
were added to check the load address of an SF command and ensure it
does not overwrite reserved memory addresses. Similar checks are
used in TFTP, serial load, and boot code to prevent overwriting
reserved memory.
wget: rework the logic to validate the load address
Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from the wget command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
tftp: rework the logic to validate the load address
Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from a tftp command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
Popup the bootmenu for 5 sec with default boot options to CC on AMD CCs and
default to SOM on others.
Users can anytime disable the bootmenu by setting the variable
enable_bootmenu=0 in zynqmp_kria.env or setup it up at run time and save
variables to NV memory.
The patch is also fixing issue created by commit 4c7363068651 ("cmd:
setexpr: fix no matching string in gsub return empty value") which has
changed return value from setexpr command (Before this commit when
matching string wasn't found command return 1 that's why was possible to
use with if).
Michal Simek [Fri, 13 Sep 2024 09:28:48 +0000 (11:28 +0200)]
arm64: zynqmp: Align mini-qspi DT with dt-schema
fixed-clock can't be described on the bus because it is missing reg
property. Also remove additional compatible string for flash. Mini qspi
configuration is used with multiple different flashes that's why describing
only one is not correct but also not required based on DT schema.
Michal Simek [Fri, 13 Sep 2024 09:28:44 +0000 (11:28 +0200)]
xilinx: Fix axi and mmc node names in mini configuration
amba is not approved node name for simple-bus that's why use axi instead to
be aligned with other xilinx boards. Node reference is not changed that's
why there is no impact but also mini configuration will never gets to OS
that's why nothing should be affected from OS perspective (paths in /proc/
for example).
Michal Simek [Fri, 13 Sep 2024 07:37:38 +0000 (09:37 +0200)]
net: gem: Remove undocumented is-internal-pcspma dt flag
Generic understanding/consideration is that phy-mode as sgmi means that the
internal PCS(Physical Coding Sublayer) should be enabled by default.
Xilinx GEM implementation allows configuration GEM (gmii mode) + PL PCS PMA
(sgmii mode, Physical Medum Attachment) but in this case phy-mode should be
setup as gmii.
The reason for this assumption is that phy-mode should be described based
on GEM configuration not based on mode coming out of PHY.
Also Linux kernel automatically setting up PCSSEL bit when phy mode is
sgmii without a need to specified additional DT propety.
All our DTSes with sgmii phy mode have this flag enabled that's why there
is no need/reason to just duplicate information.
board: xilinx: Remove conditional check for Microblaze
U-Boot is not picking boot.scr script address from device tree
rather it's using default address for Microblaze platform,
and it's picking for other platforms. Remove conditional check
for Microblaze platform, so that u-boot pick up boot.scr script
address for all platforms from device tree.
mmc: zynq_sdhci: Remove device_is_compatible() function
There are lot of device_is_compatible() present in the driver.
Remove them and replace with a variables "SDHCI_COMPATIBLE_SDHCI_89A"
and "SDHCI_COMPATIBLE_VERSAL_NET_EMMC" with match data.
This change saves the space and reduce the execution time.
arm64: zynqmp: Remove overlays and add new dtb entries for ZynqMP
Remove device tree overlay (DTBO) entries for the ZynqMP target
from the Makefile. Add new device tree binaries (DTBs) for the
zynqmp-sm-k24-revA and zynqmp-smk-k24-revA configurations.
kbuild: cherry-pick kbuild fdtoverlay changes from linux
Linux commits: 15d16d6dadf6 kbuild: Add generic rule to apply fdtoverlay 44f87191d105 kbuild: parameterize the .o part of suffix-search
The Linux commit 15d16d6dadf6 adds a generic rule in Makefile.lib
to automatically apply fdtoverlay, so that each platform doesn't
need to include a complex rule. This also automatically appends
DTC_FLAGS_foo_base += -@ to all base files
The platform's Makefile only needs to have this now:
Sean Anderson [Thu, 5 Sep 2024 17:18:32 +0000 (13:18 -0400)]
zynqmp: Disable secure access for boot devices
Boot devices (QSPI, MMC, NAND, and Ethernet) use secure access for DMA
by default. As this causes problems when using the SMMU [1], configure
them for normal access instead.
Michal Simek [Tue, 3 Sep 2024 07:48:15 +0000 (09:48 +0200)]
xilinx: Enable SIMPLE_PM_BUS
Enable simple-pm-bus driver to handle case where axi bus coming between PS
(fixed) part to PL (programmable) part has own clock or power domain.
That's why enable driver to be ready for this configuration.
Prasad Kummari [Tue, 27 Aug 2024 11:55:30 +0000 (17:25 +0530)]
arm64: zynqmp: Add u-boot command to boot into recovery image
To boot into the firmware recovery tool, the user currently
needs to press a button on the board while powering the
system up. To simplify this process, a U-Boot command
was added to allow booting directly into the recovery tool.
For example:
ZynqMP> zynqmp reboot <multiboot offset in hex>
xilinx: versal-net: fix no previous prototype for function warning.
Included the SPI header to resolve the no previous prototypes
for function. Removed unused mode variable.
sparse warnings
warning: no previous prototype for 'spi_get_env_dev'
[-Wmissing-prototypes]
warning: variable 'mode' set but not used
[-Wunused-but-set-variable]
mtd: spi-nor: scale up timeout for full-chip erase
This patch fixes timeout issues seen on large NOR flash.
For full-chip erase, where we use the SPINOR_OP_CHIP_ERASE (0xc7)
opcode. Use a different timeout for full-chip erase than for other
commands.
[Ported from Linux kernel commit 09b6a377687b ("mtd: spi-nor: scale up timeout for
full-chip erase") ]
- Several updates to i.MX9 SOC and i.MX93 EVK.
- Power domain fixes.
- TRDC cleanup and update.
- MAC address layout update.
- Add support for the i.MX9301/9302 variants.
- Add runtime detection of voltage mode.
- Generalize some code for i.MX8M and i.MX9.
- Add support for Comvetia imx6q-lxr board.
Tom Rini [Thu, 19 Sep 2024 17:25:26 +0000 (11:25 -0600)]
Merge tag 'fwu-next-19092024' of https://source.denx.de/u-boot/custodians/u-boot-tpm into next
This PR contains various improvements in the A/B update logic for EFI
- Read both copies of metadata, in case one of the is corrupted
- Check the metadata version against the running firmware to make sure it's
allowed
- Limit the use of a revert capsule if the board is on a trial state and
make sure it's not applied if the max counter has expired
When dealing with processing of the empty capsule, the capsule gets
applied only when the checks for the empty capsule pass. Print a
message to highlight if empty capsule checks fail, and return an error
value, similar to the normal capsules.
fwu: do not allow capsule processing on exceeding Trial Counter threshold
When in Trial State, the platform keeps a count of the number of times
it has booted in the Trial State. Once the threshold of the maximum
allowed count exceeds, the platform reverts to boot from a different
bank on subsequent boot, thus coming out of the Trial State. It is
expected that all the updated images would be accepted or rejected
while the platform is in Trial State. Put in checks so that it is not
possible to apply an empty capsule once the max Trial Count exceeds.
fwu: add dependency checks for selecting FWU metadata version
The FWU code supports both versions of the FWU metadata, i.e. v1 and
v2. A platform can then select one of the two versions through a
config symbol. Put a dependency in the FWU metadata version selection
config symbol to ensure that both versions of the metadata cannot be
enabled.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
fwu: check all images for transitioning out of Trial State
The platform transitions out of Trial State into the Regular State
only when all the images in the update bank have been accepted. Check
for this condition before transitioning out of Trial State.
Do a sanity check that the version of the FWU metadata that has been
read aligns with the version enabled in the image. This allows to
indicate an early failure as part of the FWU module initialisation.
In the version 2 of the FWU metadata, the metadata is broken into two
parts, a top-level structure, which provides information on the total
size of the structure among other things. Try reading the primary
partition first, and if that fails, try reading the secondary
partition. This will help in the scenario where the primary metadata
partition has been corrupted, but the secondary partition is intact.
After it gets accepted in mainline (most likely in kernel 6.13),
the lxr2 board can then be switched to OF_UPSTREAM and these device trees
can be removed from U-Boot.
Peng Fan [Thu, 19 Sep 2024 04:01:38 +0000 (12:01 +0800)]
imx93_evk: Remove CONFIG_IMX9_LOW_DRIVE_MODE and ld defconfig
Remove unused CONFIG_IMX9_LOW_DRIVE_MODE kconfig and
imx93_11x11_evk_ld_defconfig.
Remove the ld timing file.
The LD mode support will be added back with runtime detection later.
Peng Fan [Thu, 19 Sep 2024 04:01:37 +0000 (12:01 +0800)]
imx93_evk: spl: update pmic settings
1. Use runtime voltage selection for LD/OD/ND mode.
2. According to latest PE/TE report, the voltages of VDD_SOC for
LD and ND mode need add 50mv margin, so LD voltage is 0.75v->0.8v,
ND voltage is 0.8v->0.85v.
3. Use TOFF_DEB to differentiate new trimmed pmic and old pmic
Ye Li [Thu, 19 Sep 2024 04:01:33 +0000 (12:01 +0800)]
imx93: Add Low performance parts 9302/9301 support
Add support for iMX93 low performance parts 9302 and 9301 which
restrict to low drive voltage only.
The parts run A55 max speed at 900Mhz and M33 at 133Mhz, have NPU
and A55 core1 (9301) disabled.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 19 Sep 2024 04:01:31 +0000 (12:01 +0800)]
imx: Generalize disable_cpu_nodes
disable_cpu_nodes could be reused by i.MX9, so move disable_cpu_nodes
out from mach-imx/imx8m/soc.c to mach-imx/fdt.c and update
disable_cpu_nodes to make it easy to support different socs.
Peng Fan [Thu, 19 Sep 2024 04:01:30 +0000 (12:01 +0800)]
imx8m: soc: Drop disable_pmu_cpu_nodes
i.MX8M use PPI for PMU interrupts, there is no reason to update
interrupt-affinity for PMU even interrupt-affinity was wrongly added
to device tree before.
Jacky Bai [Thu, 19 Sep 2024 04:01:28 +0000 (12:01 +0800)]
imx9: soc: Mask the wdog reset in src by default on i.mx9
Normally, the wdog will be used for trigger external PMIC reset
through the WDOG_ANY pin. If the PMIC chip has debounce logic for
the reset signal, in some corner case the wdog can NOT trigger
external PMIC reset if the SoC has been reset internal before the
PMIC captures the WDOG_ANY pin reset, so need to keep the WDOG3-5
reset masked in the SRC to let the PMIC to do the reset safely.
Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 19 Sep 2024 04:01:27 +0000 (12:01 +0800)]
imx9: clock: Update clock init function and sequence
Since we use SPEED GRADE fuse to set A55 frequency, remove the
set_arm_core_low_drive_clk function which has hard coded frequency.
And adjust clock_init called sequence and split it to early and late
functions.
Set the authen register in early function, because CCF driver checks
NS bit.
Set bus and core clock in late function, because the fuse read and
SoC type/rev depend on ELE.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 19 Sep 2024 04:01:26 +0000 (12:01 +0800)]
imx9: soc: Add function to get target voltage mode
Replace the static CONFIG_IMX9_LOW_DRIVE_MODE with runtime target
voltage mode by checking the part's SPEED GRADE fuse.
SPL will configure to highest A55 speed which is indicated by the SPEED
fuse and select corresponding voltage mode.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 19 Sep 2024 04:01:20 +0000 (12:01 +0800)]
imx9: soc: Configure TRDC for M33 TCM access
On OSCCA part, M33 TCM is used for ROM PATCH and protected by ELE ROM.
So after release TRDC, we need to configure TRDC for M33 TCM,
otherwise A55 can't access the TCM.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
Tom Rini [Wed, 18 Sep 2024 19:07:19 +0000 (13:07 -0600)]
Merge patch series "Fix various bugs"
Simon Glass <sjg@chromium.org> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
Simon Glass [Sun, 1 Sep 2024 22:26:32 +0000 (16:26 -0600)]
test: mbr: Use a constant for the block size
It isn't that important to factor out constants in tests, but in this
case we have 0x200 and 512 used. The commands don't use the constant
as they use a block count ('1'). It doesn't create more code to use a
constant, so create one.
Simon Glass [Sun, 1 Sep 2024 22:26:31 +0000 (16:26 -0600)]
test: mbr: Unmap the buffers after use
This tests maps some local variables into sandbox's address space. Make
sure to unmap them afterwards.
Note that the normal approach with sandbox is to use a fixed memory
address in the RAM, to avoid needing to create a map for transient local
variables.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 04291ee0aba ("cmd: mbr: Allow 4 MBR partitions without need...")
Simon Glass [Sun, 1 Sep 2024 22:26:25 +0000 (16:26 -0600)]
sandbox: Unmap old tags
So far unmapping has not been implemented. This means that if one test
maps a pointer to an address with map_sysmem(), then a second test can
use that same pointer, by mapping the address back to a pointer with
map_to_sysmem(). This is not really desirable, even if it doesn't
cause any problems at the moment.
projects / u-boot.git / log