From: Peng Fan Date: Tue, 24 Sep 2024 07:31:59 +0000 (+0800) Subject: net: fec_mxc: Fix clk_ref rate on iMX93 X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/index.xml?a=commitdiff_plain;h=94d02f13dbc582cf0644a53da33cc4ad9213661f;p=u-boot.git net: fec_mxc: Fix clk_ref rate on iMX93 i.MX93 FEC ENET port supports two mode: RGMII and RMII. For RGMII, there is an internal /2 divider, so the freq needs to set with (*2), otherwise the speed will not reach 1G and cause communication error in some network environments. For RMII, the clk path is ccm -> enet tx_clk pin -> pad loop back to enet, no /2 divider. So fix for RGMII mode with freq multiplied by 2. Fixes: 09de565f76b ("net: fec_mxc: support i.MX93") Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 0a0d92bc2c..d0590fd137 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1210,10 +1210,13 @@ static int fecmxc_set_ref_clk(struct clk *clk_ref, phy_interface_t interface) else if (interface == PHY_INTERFACE_MODE_RGMII || interface == PHY_INTERFACE_MODE_RGMII_ID || interface == PHY_INTERFACE_MODE_RGMII_RXID || - interface == PHY_INTERFACE_MODE_RGMII_TXID) + interface == PHY_INTERFACE_MODE_RGMII_TXID) { freq = 125000000; - else + if (is_imx93()) + freq = freq << 1; + } else { return -EINVAL; + } ret = clk_set_rate(clk_ref, freq); if (ret < 0)