From: Stefan Eichenberger Date: Wed, 14 Jun 2023 09:01:37 +0000 (+0200) Subject: colibri_imx6: fix RALAT and WALAT values X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/index.xml?a=commitdiff_plain;h=44103cf331eeb83e7b41391526c074b1432f8dba;p=u-boot.git colibri_imx6: fix RALAT and WALAT values Running a memtest in U-Boot and Linux shows that some Colibri iMX6 produce bitflips at temperatures above 60°C. This happens because the RALAT and WALAT values on the Colibri iMX6 are too low. The problems were introduced by commit 09dbac8174c4 ("mx6: ddr: Restore ralat/walat in write level calibration") before the calibration process overwrote the values and set them to the maximum value. With this commit, we make sure that the RALAT and WALAT values are set to the maximum values again. This has been proven to work for years. Fixes: 09dbac8174c4 ("mx6: ddr: Restore ralat/walat in write level calibration") Signed-off-by: Stefan Eichenberger Signed-off-by: Francesco Dolcini --- diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 65e0e9a156..677caa4a4e 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -767,8 +767,7 @@ MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333, /* * MDMISC mirroring interleaved (row/bank/col) */ -/* TODO: check what the RALAT field does */ -MX6_MMDC_P0_MDMISC, 0x00081740, +MX6_MMDC_P0_MDMISC, 0x000b17c0, /* * MDSCR con_req @@ -900,8 +899,7 @@ MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333, /* * MDMISC mirroring interleaved (row/bank/col) */ -/* TODO: check what the RALAT field does */ -MX6_MMDC_P0_MDMISC, 0x00081740, +MX6_MMDC_P0_MDMISC, 0x000b17c0, /* * MDSCR con_req