From: Michael Walle Date: Fri, 13 Dec 2024 10:23:18 +0000 (+0100) Subject: board: sl28: increase SPL_SYS_MALLOC_SIZE X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=6c849340b7ab5953e061885c4f7152bd93e3ba49;p=u-boot.git board: sl28: increase SPL_SYS_MALLOC_SIZE Increase the malloc size to 2MiB because our FIT image exceeds the 1MiB limit either if BL31 mode is enabled or if another device tree is added to the image. Signed-off-by: Michael Walle Tested-by: Heiko Thiery Signed-off-by: Peng Fan --- diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 35894a10cb..eae06b546d 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -54,6 +54,7 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x200000 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x900 CONFIG_SPL_MPC8XXX_INIT_DDR=y