From: Michael Walle <mwalle@kernel.org>
Date: Fri, 13 Dec 2024 10:23:20 +0000 (+0100)
Subject: doc: board: sl28: fix table
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=079ae2734c4641b148932c1758a2524492d35772;p=u-boot.git

doc: board: sl28: fix table

Convert the table to a correct reST table syntax.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/doc/board/kontron/sl28.rst b/doc/board/kontron/sl28.rst
index 2cb8ec62be..5d47ce6c15 100644
--- a/doc/board/kontron/sl28.rst
+++ b/doc/board/kontron/sl28.rst
@@ -65,12 +65,14 @@ wdt command flags
 The `wdt start` as well as the `wdt expire` command take a flags argument.
 The supported bitmask is as follows.
 
-| Bit | Description                   |
-| --- | ----------------------------- |
-|   0 | Enable failsafe mode          |
-|   1 | Lock the control register     |
-|   2 | Disable board reset           |
-|   3 | Enable WDT_TIME_OUT# line     |
+===  ==============================
+Bit  Description
+===  ==============================
+  0  Enable failsafe mode
+  1  Lock the control register
+  2  Disable board reset
+  3  Enable WDT_TIME_OUT# line
+===  ==============================
 
 For example, you can use `wdt expire 1` to issue a reset and boot into the
 failsafe bootloader.