From 92099e69a2943dc24675041222cfd8d6a43db44f Mon Sep 17 00:00:00 2001 From: Sergiu Moga <sergiu.moga@microchip.com> Date: Fri, 13 May 2022 18:13:41 +0300 Subject: [PATCH] configs: at91: sama5d2_icp: enable QSPI and SF command Add the configurations required for enabling QSPI and the SF command to allow changes to be made dynamically to serial flash devices from the command line interface. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- configs/sama5d2_icp_mmc_defconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig index 688fa00d23..57b76c3a5e 100644 --- a/configs/sama5d2_icp_mmc_defconfig +++ b/configs/sama5d2_icp_mmc_defconfig @@ -55,6 +55,7 @@ CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set +CONFIG_CMD_SF_TEST=y CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y @@ -83,6 +84,15 @@ CONFIG_SYS_I2C_AT91=y CONFIG_I2C_EEPROM=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_BUS=2 +CONFIG_SF_DEFAULT_SPEED=66000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_DM_ETH=y CONFIG_MACB=y CONFIG_PINCTRL=y @@ -94,6 +104,9 @@ CONFIG_ATMEL_USART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_AT91=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_TCB_TIMER=y -- 2.39.5