From e743f1e5985818dd267d18aec6879ccebcaee078 Mon Sep 17 00:00:00 2001
From: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Date: Thu, 30 Nov 2017 22:38:40 +0100
Subject: [PATCH] ARM: imx: cm_fx6: remove esdhc init code from board file

Commit 5248930ebf48 ("dm: imx: cm_fx6: Enable more driver model support")
enabled driver model support for MMC. Remove the old mmc init code, which
is no longer used, from the board file.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 board/compulab/cm_fx6/cm_fx6.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 81438cd28c..620c3f2d0d 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -506,35 +506,6 @@ static void cm_fx6_setup_gpmi_nand(void)
 static void cm_fx6_setup_gpmi_nand(void) {}
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
-static struct fsl_esdhc_cfg usdhc_cfg[3] = {
-	{USDHC1_BASE_ADDR},
-	{USDHC2_BASE_ADDR},
-	{USDHC3_BASE_ADDR},
-};
-
-static enum mxc_clock usdhc_clk[3] = {
-	MXC_ESDHC_CLK,
-	MXC_ESDHC2_CLK,
-	MXC_ESDHC3_CLK,
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	int i;
-
-	cm_fx6_set_usdhc_iomux();
-	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
-		usdhc_cfg[i].sdhc_clk = mxc_get_clock(usdhc_clk[i]);
-		usdhc_cfg[i].max_bus_width = 4;
-		fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
-		enable_usdhc_clk(1, i);
-	}
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_MXC_SPI
 int cm_fx6_setup_ecspi(void)
 {
-- 
2.39.5