]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2014-01-07 Jeroen HofsteeARM: twister: add missing gpio clock init
2014-01-07 Jeroen HofsteeARM: tam3517-common: fix nand spl boot
2014-01-07 Tom RiniTI:omap3: Drop omap3_zoom2
2014-01-07 Tom Rinicam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_S...
2014-01-06 Albert ARIBAUDMerge branch 'u-boot-samsung/master' into 'u-boot-arm...
2014-01-06 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-03 Sergey Alyoshinarm: mx5: Add fuse supply enable in fsl_iim
2014-01-03 Otavio SalvadorARM: mx6: Allow enablement of FEC Anatop based clock...
2014-01-03 Otavio SalvadorARM: mx6: Change the FDT loading address to avoid overl...
2014-01-03 Otavio Salvadormx28evk: Extend environment to easy write of NAND system
2014-01-03 Otavio Salvadormx28evk: Add 'nandboot' environment command
2014-01-03 Otavio Salvadormx28evk: Use 512k for fdt partition to align it
2014-01-03 Otavio Salvadorimx: Easy enabling of SION per-pin using MUX_MODE_SION...
2014-01-02 Fabio Estevammx6: soc: Disable VDDPU regulator
2014-01-02 Fabio Estevammx6: soc: Add the required LDO ramp up delay
2014-01-02 Fabio Estevammx6: soc: Introduce set_ldo_voltage()
2014-01-02 Fabio Estevammx6: soc: Set the VDDSOC at 1.175 V
2014-01-02 Fabio Estevammx6: soc: Clear the LDO ramp values up prior to setting...
2014-01-02 Fabio Estevammx6: soc: Staticize set_vddsoc()
2014-01-02 Fabio Estevammx6sabre_common.h: Add CONFIG_CMD_FUSE support
2014-01-02 Fabio Estevamdoc: README.fuse: Add an example on how to use the...
2013-12-31 Piotr Wilczekboard:trats2: fix default partitions and mmc env
2013-12-31 Piotr Wilczekboard:trats1:trats2: fix adapter number
2013-12-30 Rajeshwari... SPL: EXYNOS: Prepare for variable size SPL support
2013-12-30 Rajeshwari... Config: Add initial config for SMDK5420
2013-12-30 Rajeshwari... DTS: Add dts support for SMDK5420
2013-12-30 Rajeshwari... Exynos5420: Add base patch for SMDK5420
2013-12-30 Rajeshwari... Exynos5420: Add support for 5420 in pinmux and gpio
2013-12-30 Rajeshwari... Exynos5420: Add DDR3 initialization for 5420
2013-12-30 Rajeshwari... Exynos5420: Add clock initialization for 5420
2013-12-30 Rajeshwari... EXYNOS5420: Add dmc and phy_control register structure
2013-12-30 Rajeshwari... EXYNOS5420: Add power register structure.
2013-12-30 Rajeshwari... Exynos5420: Add base addresses for 5420
2013-12-30 Rajeshwari... EXYNOS5: Create a common board file
2013-12-19 Stefano BabicMX6: fix sata compilation for i.MX6
2013-12-19 Lokesh VutlaARM: AM43xx: Add Maintainer
2013-12-19 Lokesh VutlaARM: AM43xx: GP_EVM: Add support for DDR3
2013-12-19 Lokesh VutlaARM: AM43xx: EPOS_EVM: Add support for LPDDR2
2013-12-19 Lokesh VutlaARM: AM33xx+: Update ioregs to pass different values
2013-12-19 Lokesh VutlaARM: AM43xx: clocks: Update DPLL details
2013-12-19 Lokesh VutlaARM: AM43xx: mux: Update mux data
2013-12-19 Lokesh VutlaARM: AM43xx: Update Current Booting devices list
2013-12-19 Lokesh VutlaARM: AM43xx: Select clk source for Timer2
2013-12-19 Sekhar NoriARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG...
2013-12-19 Sekhar NoriARM: AM43XX: board: add support for reading onboard...
2013-12-19 Lokesh VutlaARM: AM43xx: Add extra ENV settings
2013-12-19 Lokesh VutlaARM: AM43xx: Add L2 Support
2013-12-19 Lokesh VutlaARM: AM43xx: Adapt to ti_armv7_common.h config file
2013-12-19 Lokesh VutlaARM: AM43xx: Update the base addresses of modules
2013-12-19 Stefan Roesearm: omap3: Fix beagleboard SPL boot hangup (GPIO clock...
2013-12-18 Albert ARIBAUDMerge remote-tracking branch 'u-boot-pxa/master' into...
2013-12-18 Albert ARIBAUDMerge branch 'u-boot-tegra/master' into 'u-boot-arm...
2013-12-18 Marek VasutARM: pxa: Fix CONFIG_SYS_HZ on PXA
2013-12-18 Alban Bedelarm: tegra: Fix the CPU complex reset masks
2013-12-18 Alban BedelARM: tegra: Add the Tamonten™ NG Evaluation Carrier...
2013-12-18 Alban Bedeli2c: tegra: Add the fifth bus on SoC with more than...
2013-12-18 Alban BedelARM: tegra: support SKU b1 of Tegra30
2013-12-18 Jim LinARM: config: USB: Tegra30/114: Fix EHCI timeout issue...
2013-12-18 Vidya Sagartegra: allow build to succeed with SPL disabled
2013-12-18 Thierry RedingChange maintainer for Avionic Design boards
2013-12-18 Thierry RedingTegra114: Do not program CPCON field for PLLX
2013-12-18 Jimmy ZhangTegra114: Fix PLLX M, N, P init settings
2013-12-18 Sergei Ianovicharm: pxa: init ethaddr for LP-8x4x using DT
2013-12-18 Sergei Ianovicharm: pxa: update LP-8x4x to boot DT kernel
2013-12-18 Sergei Ianovicharm: pxa: fix 2nd flash chip address on LP-8x4x
2013-12-18 Sergei Ianovicharm: pxa: fix LP-8x4x USB support
2013-12-18 Albert ARIBAUDMerge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
2013-12-18 Sergei IanovichARM: pxa: prevent PXA270 occasional reboot freezes
2013-12-18 Nobuhiro Iwamatsuarm: koelsch: Add support reset function
2013-12-18 Nobuhiro Iwamatsuarm: koelsch: Add support I2C
2013-12-18 Nobuhiro Iwamatsuarm: koelsch: Add support Ethernet
2013-12-18 Nobuhiro Iwamatsuarm: lager: Add support reset function
2013-12-18 Nobuhiro Iwamatsuarm: lager: Add support I2C
2013-12-18 Nobuhiro Iwamatsuarm: lager: Add support Ethernet
2013-12-18 Nobuhiro Iwamatsuarm: rmobile: Update README.rmobile
2013-12-17 Frank Liimx6: fix random hang when download by usb
2013-12-17 Marek VasutARM: mxs: tools: Fix errno handling in strtoul() invocation
2013-12-17 Fabio Estevammx6sabresd: Fix LVDS width and color format
2013-12-17 Fabio Estevammx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK...
2013-12-17 Fabio Estevammx6: clock: Fix the calculation of PLL_ENET frequency
2013-12-17 Marek VasutARM: mx53: video: Add IPUv3 LCD support for M53EVK
2013-12-17 Liu YingMX6 SabreSD: Use readl() to read the CCM_CCGR3 register
2013-12-17 Eric NelsonARM: mx6: Update non-Freescale boards to include CPU...
2013-12-17 Fabio Estevamconfigs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
2013-12-17 Giuseppe Paganoudoo: Add SATA support on uDoo Board.
2013-12-17 Giuseppe Paganonitrogen6x: Move setup_sata to common part
2013-12-17 Bo Shenarm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to...
2013-12-17 Bo Shenarm: atmel: at91sam9x5: cleanup unneeded undef
2013-12-17 Bo Shenarm: atmel: at91sam9x5: cleanup cs configure for spi
2013-12-17 Eric Nelsoni.MX6 (DQ/DLS): use macros for mux and pad declarations
2013-12-17 Fabio Estevamimx: Explicitly pass the I2C bus number in pmic_init()
2013-12-12 Lokesh VutlaARM: OMAP5: clocks: Update MPU settings for OPP_NOM
2013-12-12 Lokesh VutlaARM: DRA7xx: Change clk divider setting
2013-12-12 Nikita Kiryanovarm: omap: cm_t35: update config file
2013-12-12 Yegor Yefremovam3517_evm: activate Ethernet PHY
2013-12-12 Heiko Schocheram335x, siemens boards: adapt default environment setting
2013-12-12 Nikita Kiryanovarm: omap: abb: add missing include
2013-12-12 Dan Murphyarm: am437: Fix offset for USB registers
2013-12-12 Tom Riniam335x_evm: Consolidate DFU environment parts into...
2013-12-12 Stefan Roesearm: omap3: Add SPL support to cm_t35
next