From 83fdfa64e45c97c24fc563f6850bec5b544ba452 Mon Sep 17 00:00:00 2001 From: Heiko Thiery Date: Wed, 23 Feb 2022 10:48:26 +0100 Subject: [PATCH] ARM: imx: imx8mn-*-evk: use reset-gpios in phy node To be in sync with the linux devicetree change the 'phy-reset-gpios' in the fec node to 'reset-gpios' in the phy node. The PHY reset will be done by the eth-phy-uclass driver while probing the PHY. This is ok since it is done before probing the fec. Signed-off-by: Heiko Thiery Tested-by: Marek Vasut # 8MNANOD4-EVK Reviewed-by: Fabio Estevam --- arch/arm/dts/imx8mn-evk.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index fc2c7f1d44..ed865444da 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,7 +53,6 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; - phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; fsl,magic-packet; status = "okay"; @@ -64,6 +63,8 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; vddio-supply = <&vddio>; vddio: vddio-regulator { -- 2.39.5