From 4f89f6029af82dc9ef18e8c23f25d9f158878a9e Mon Sep 17 00:00:00 2001 From: Sam Protsenko Date: Wed, 7 Aug 2024 22:14:35 -0500 Subject: [PATCH] mmc: exynos_dw_mmc: Read and use DDR timing when available DDR timing values should be defined in "samsung,dw-mshc-ddr-timing" dts property, and used when DDR MMC mode is selected. Read that value from dts and use it. If it's not available, use SDR timing values instead. This change is following upstream Linux kernel implementation. Signed-off-by: Sam Protsenko Signed-off-by: Minkyu Kang --- drivers/mmc/exynos_dw_mmc.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index b9d655c0d5..32f3ea168b 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -52,6 +52,7 @@ struct dwmci_exynos_priv_data { #endif struct clk clk; u32 sdr_timing; + u32 ddr_timing; const struct exynos_dwmmc_variant *chip; }; @@ -127,8 +128,14 @@ static int exynos_dwmmc_set_sclk(struct dwmci_host *host, unsigned long rate) static int exynos_dwmci_clksel(struct dwmci_host *host) { struct dwmci_exynos_priv_data *priv = exynos_dwmmc_get_priv(host); + u32 timing; - dwmci_writel(host, priv->chip->clksel, priv->sdr_timing); + if (host->mmc->selected_mode == MMC_DDR_52) + timing = priv->ddr_timing; + else + timing = priv->sdr_timing; + + dwmci_writel(host, priv->chip->clksel, timing); return 0; } @@ -305,6 +312,17 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev) priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL; } + err = dev_read_u32_array(dev, "samsung,dw-mshc-ddr-timing", timing, 2); + if (err) { + debug("DWMMC%d: Can't get ddr-timings, using sdr-timings\n", + host->dev_index); + priv->ddr_timing = priv->sdr_timing; + } else { + priv->ddr_timing = DWMCI_SET_SAMPLE_CLK(timing[0]) | + DWMCI_SET_DRV_CLK(timing[1]) | + DWMCI_SET_DIV_RATIO(div); + } + host->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0); host->bus_hz = dev_read_u32_default(dev, "clock-frequency", 0); -- 2.39.5