Marek Vasut [Sun, 27 Oct 2024 02:20:07 +0000 (03:20 +0100)]
ARM: renesas: Deduplicate common Renesas defconfig
Deduplicate common Renesas defconfig by factoring out the common
parts into generic renesas_rcar_defconfig and including those using
the #include <configs/...> preprocessor macro in the current set of
board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config are
identical for all Renesas systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car 64bit systems by factoring
out the common parts into generic renesas_rcar64.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car 64bit systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car Gen4 systems by factoring
out the common parts into generic renesas_rcar4.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car Gen4 systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car Gen3 systems by factoring
out the common parts into generic renesas_rcar3.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car Gen3 systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Deduplicate defconfigs for all Renesas R-Car Gen2 systems by factoring
out the common parts into generic renesas_rcar2.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is identical
for all Renesas R-Car Gen2 systems.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Wed, 4 Sep 2024 22:34:20 +0000 (00:34 +0200)]
clk: renesas: Fix missing unbind on driver look up failure
In case lists_driver_lookup_name("rst_gen3") fails, the clk_gen3 driver
has to be unbound before erroring out. Reorder the function such that
both clk_gen3 and rst_gen3 drivers are looked up first, if either look
up fails then the function errors out right away. Second, the clk_gen3
is bound, if binding fails, the function still errors out right away
because there is nothing to undo after either lists_driver_lookup_name()
call. Finally, rst_gen3 is bound and if this binding fails, then that
is the only place where clk_gen3 has to be unbound before erroring out.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Fri, 1 Nov 2024 19:38:05 +0000 (13:38 -0600)]
Merge patch series "fs: ext4: implement opendir, readdir, closedir"
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
With this series opendir, readdir, closedir are implemented for ext4.
These functions are needed for the UEFI sub-system to interact with
the ext4 file system.
To reduce code growth the functions are reused to implement the ls
command for ext4.
A memory leak in ext4fs_exists is resolved.
ext4fs_iterate_dir is simplified by removing a redundant pointer copy.
Now that opendir, readir, closedir are implemented for ext4 we can use
fs_ls_generic() for implementing the ls command.
Adjust the unit tests:
* fs_ls_generic() produces more spaces between file size and name.
* The ext4 specific message "** Can not find directory. **\n" is not
written anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Some of our file system drivers cannot report a file size for
directories. Use a dummy value in this case.
* For SetInfo the UEFI spec requires to ignore the file size field.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 30 Oct 2024 00:36:49 +0000 (18:36 -0600)]
test/cmd/mem_copy.c: Use CONFIG_SYS_LOAD_ADDR for base
When reading/writing to memory we cannot assume that a base address of
0x0 is correct and functional. So use CONFIG_SYS_LOAD_ADDR as the base
from which we add a bit more padding and being our tests.
Patrick Rudolph [Wed, 30 Oct 2024 13:11:46 +0000 (14:11 +0100)]
acpi_table: Fix coverity defect in acpi_write_spcr
Fix "Integer handling issues (SIGN_EXTENSION)" in newly added code:
Cast serial_info.reg_offset to u64 to prevent an integer overflow when
shifted too many bits to the left. Currently this never happens as the
shift is supposed to be less than 4.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tom Rini [Thu, 31 Oct 2024 17:47:25 +0000 (11:47 -0600)]
mtd: spi-nor: Guard SPI_STACKED_PARALLEL with DM_SPI check
While we want to compile the SPI_STACKED_PARALLEL code everywhere we
can, it must first be guarded with an #if for DM_SPI as not all cases
where we have this code built, such as in SPL, will have the relevant
DM_SPI option enabled.
Fixes: 43423cdc5dc1 ("mtd: spi-nor: Always build SPI_STACKED_PARALLEL code") Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Tom Rini <trini@konsulko.com>
In the patch series "spi-nor: Add parallel and stacked memories support"
a number of issues have since been raised about problems that now exist
on a large number of previously working platforms. Marek Vasut has gone
and identified a number of issues and this series is the starting point
of attempting to address them and fix the problems with previously
existing platforms.
Prevent the code gated by SPI_STACKED_PARALLEL from bitrot
by using if (CONFIG_IS_ENABLED(SPI_STACKED_PARALLEL)) around
it. That way, it is always at least compiled.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sat, 26 Oct 2024 20:16:25 +0000 (22:16 +0200)]
mtd: spi-nor: Rename SPI_ADVANCE to SPI_STACKED_PARALLEL
The SPI_ADVANCE description does not explain what the switch does.
It does not have anything to do with any advanced functionality, it
only gates off support for stacked and parallel SPI NORs. Rename the
Kconfig symbol, update description, and move it right next to Xilinx
hardware as it seems to be specific to this hardware. Make sure the
symbol is also protected by if DM_SPI in Kconfig.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sat, 26 Oct 2024 20:16:24 +0000 (22:16 +0200)]
mtd: spi-nor: Rewrite rem_bank_len calculation
Rewrite the code to make it clear exactly where the
SNOR_F_HAS_PARALLEL flag leads to *2 and /2 operation
compared to regular code path. No functional change.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sat, 26 Oct 2024 20:16:22 +0000 (22:16 +0200)]
mtd: spi-nor: Remove recently added SST special case
Remove undocumented SST special case. This was added in commit 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented write_disable() call. This was added in commit 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented set_4byte() call. This was added in commit 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented spi_nor_wait_till_ready() call. This was added in commit 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sat, 26 Oct 2024 20:16:18 +0000 (22:16 +0200)]
mtd: spi-nor: Remove recently added nor->addr_width == 3 test
Remove undocumented nor->addr_width == 3 test. This was added in commit 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
This also has a bad side-effect which breaks READ operation of every SPI NOR
which does not use addr_width == 3, e.g. s25fs512s does not work at all. This
is because if addr_width != 3, rem_bank_len is always 0, and if rem_bank_len
is 0, then read_len is 0 and if read_len is 0, then the spi_nor_read() returns
-EIO.
Basic reproducer is as follows:
"
=> sf probe ; sf read 0x50000000 0 0x10000
SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Read: ERROR -5
"
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Thu, 31 Oct 2024 14:33:24 +0000 (08:33 -0600)]
Merge tag 'efi-2025-01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-01-rc2
Documentation:
* include semihosting and K3 boards only once in table of contents
* include file-system API into HTML docs
* describe struct ext2_inode
* update Python requirements
UEFI:
* mark local functions static
* simplify efi_free_pages()
* pass correct end address value to efi_dp_from_mem()
* fix typos in HII test and eficonfig command
Ilias Apalodimas [Thu, 24 Oct 2024 11:01:55 +0000 (14:01 +0300)]
efi_loader: Simplify efi_free_pages()
We currently call efi_free_pages() with a notify flag and explicitly
update the efi memory map. That's not needed as lmb_free_flags() will do
that for us if the LMB_NONOTIFY flag is removed
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Markus Volk [Wed, 30 Oct 2024 05:07:16 +0000 (06:07 +0100)]
scripts/dtc/pylibfdt/libfdt.i_shipped: Use SWIG_AppendOutput
Swig has changed language specific AppendOutput functions. The helper
macro SWIG_AppendOutput remains unchanged. Use that instead
of SWIG_Python_AppendOutput, which would require an extra parameter
since swig 4.3.0.
/home/flk/poky/build-test/tmp/work/qemux86_64-poky-linux/u-boot/2024.10/git/arch/x86/cpu/u-boot-64.lds
| scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
| scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
| 5581 | resultobj = SWIG_Python_AppendOutput(resultobj, val);
| | ^~~~~~~~~~~~~~~~~~~~~~~~
Ilias Apalodimas [Thu, 24 Oct 2024 10:46:25 +0000 (13:46 +0300)]
lmb: Correctly unmap memory after notifications
We never unmap the memory used to update the EFI memory map after
notifications
Fixes: commit 2f6191526a13 ("lmb: notify of any changes to the LMB memory map") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
CONFIG_CMD_DNS and CONFIG_CMD_WGET depend on CONFIG_CMD_NET.
CONFIG_CMD_NET depends on CONFIG_NET or CONFIG_NET_LWIP.
We shall only enable CONFIG_EFI_HTTP if there is network support.
We have to select CONFIG_CMD_NET.
Fixes: d7d07a8b508b ("efi_loader: support boot from URI device path") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
- Implement i.MX93 erratum fix on the dwc_eth_qos driver to fix RMII.
- Add support for Emcraft Systems NavQ+.
- Fix the size of IVT + CSF blob tacked on to u-boot.itb.
This patch series aims to add DM support for the AEMIF controller that
can be found in the DaVinci SoCs.
This controller has already a driver used by the Keystone SoCs so I
add my work to it.
As we can now easily import Linux device-trees, I try to stick the
most I can to the Linux bindings of the AEMIF controller. To do so I add
an 'intermediate' driver called 'ti-aemif-cs'. It's in charge of
configuring timings for a given chip select of the AEMIF controller.
The AEMIF's bindings in the Linux tree have a node for the AEMIF
controller and then a node for each AEMIF's chip select. This CS node
doesn't have a compatible property but describes the timing parameters
used by a given chip select.
The U-Boot DM framework expects every node to have a 'compatible'
property. If no 'compatible' is present in a node, its children won't be
parsed by u-boot.
Add DM support to the ti-aemif driver.
Add a new ti-aemif-cs driver to comply with the Linux bindings and the
U-Boot's DM philosophy. This driver handles the timing parameters
of an AEMIF's chip select so move aemif_cs_configure() from ti-aemif.c
to ti-aemif-cs.c.
Tom Rini [Tue, 29 Oct 2024 18:12:09 +0000 (12:12 -0600)]
Merge patch series "Support Aspeed SGPIO controller"
Billy Tsai <billy_tsai@aspeedtech.com> says:
AST2600 SoC has 2 SGPIO master interfaces one with 128 pins another one
with 80 pins, AST2500/AST2400 SoC has 1 SGPIO master interface that
supports up to 80 pins.
Tom Rini [Mon, 28 Oct 2024 16:48:42 +0000 (10:48 -0600)]
test/cmd: Make some "ut dm" tests only available on sandbox
Currently, the "dm" suite in unit tests (ut) is only available on
sandbox. Make sure that all cmd tests that are part of this suite are
only available on sandbox and not attempted to be run on hardware (where
it will fail to be able to be started).
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
Ilias Apalodimas [Sat, 26 Oct 2024 08:05:53 +0000 (11:05 +0300)]
disk: Mark static functions in part_efi.c
Mark all the functions that are only defined locally as static and
quiesce W=1 warnings
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[trini: Add __maybe_unused as it's now seen as unused in some cases] Signed-off-by: Tom Rini <trini@konsulko.com>
Ilias Apalodimas [Wed, 23 Oct 2024 15:26:36 +0000 (18:26 +0300)]
lmb: Remove lmb_alloc_flags()
lmb_alloc_flags() & lmb_alloc_base_flags() are just a wrappers for
_lmb_alloc_base(). Since the only difference is the max address of the
allowed allocation which _lmb_alloc_base() already supports with the
LMB_ALLOC_ANYWHERE flag, remove one of them.
Keep the lmb_alloc_base_flags() which also prints an error on failures
and adjust efi_allocate_pages() to only use one of them.
While at it clean up the duplicate function description from the header
file.
Ilias Apalodimas [Wed, 23 Oct 2024 15:22:01 +0000 (18:22 +0300)]
lmb: Simplify lmb_should_notify usage
We never call lmb_map_update_notify() without checking the result of
lmb_should_notify(). Instead of running that function everytime fold it
in there and add the additional flags parameter
Ilias Apalodimas [Wed, 23 Oct 2024 15:22:00 +0000 (18:22 +0300)]
lmb: Fix lmb_add_region_flags() return codes and testing
The function description says this should return 0 or -1 on failures.
When regions coalesce though this returns the number of coalescedregions
which is confusing and requires special handling of the return code.
On top of that no one is using the number of coalesced regions.
So let's just return 0 on success and adjust our selftests accordingly
Jonas Jelonek [Tue, 22 Oct 2024 16:31:18 +0000 (10:31 -0600)]
cpu_func.h: provide noncached_set_region prototype to fix build
Due to the removal of weak functions in 7d6cee2cd0 ("cmd: cache: Remove
weak function"), U-Boot fails to compile after updating to v2024.10 for
mediatek target in OpenWrt with GCC-14 with error:
cmd/cache.c: In function 'do_dcache':
cmd/cache.c:57:25: error: implicit declaration of function
'noncached_set_region' [-Wimplicit-function-declaration]
Thus, provide a prototype in include/cpu_func.h to fix a build
error in cmd/cache.c, since related prototypes are also located there.
The issue occurred after the update of uboot-mediatek in OpenWrt to
v2024.10, in combination with GCC-14 toolchain. It was reported and
discussed in https://github.com/openwrt/openwrt/issues/16697, and
temporarily fixed with
https://github.com/openwrt/openwrt/commit/92ca322dd1f48158b8829fec59319a12e4ae4295.
Tom Rini [Tue, 22 Oct 2024 16:31:17 +0000 (10:31 -0600)]
CONFIG_SYS_NONCACHED_MEMORY: Move prototypes to include/cpu_func.h for consistency
Currently, a number of generic cache related functions have their common
prototype declared in include/cpu_func.h. Move the current set of
noncached functions there as well to match.
Erik Schumacher [Mon, 28 Oct 2024 15:30:56 +0000 (15:30 +0000)]
net: dwc_eth_qos: Remove obsolete imx8 includes
They were added with commit 0e9d23945ce0 ("net: eqos: implement callbaks
to get interface and set txclk rate") but were not removed with
commit 5fc783b5d9c9 ("net: dwc_eth_qos: move i.MX code out") when i.MX
specific code was moved to a separate file.
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Erik Schumacher [Mon, 28 Oct 2024 15:30:17 +0000 (15:30 +0000)]
net: dwc_eth_qos_imx: Add platform specific reset for i.MX93
The EQOS on i.MX93 fails to finish the reset procedure in RMII mode.
This is described in errata ERR051683. This patch implements the
provided workaround which sets the PS and FES bits after the SWR is set
by using the eqos_fix_soc_reset function.
Adapted from linux-kernel commit b536f32b5b03 ("net: stmmac: dwmac-imx:
use platform specific reset for imx93 SoCs")
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Erik Schumacher [Mon, 28 Oct 2024 15:29:42 +0000 (15:29 +0000)]
net: dwc_eth_qos: Add support for platform specific reset
This patch adds support for optional platform specific reset logic in
the dwc_eth_qos driver. This new function 'eqos_fix_soc_reset' is called
after the EQOS_DMA_MODE_SWR is set and before the driver waits for this
bit to clear.
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Rasmus Villemoes [Thu, 24 Oct 2024 12:27:35 +0000 (14:27 +0200)]
imx: hab: fix size of IVT+CSF blob tacked on to u-boot.itb
Loading flash.bin using uuu fails when flash.bin does not have the
right size.
When flash.bin is loaded from some storage medium (sd card/emmc), SPL
just loads some random garbage bytes from beyond what has been
populated when flash.bin was written, but when loaded via uuu, SPL
hangs waiting for the host to send the expected number of bytes. Which
is (size of FIT image aligned to 0x1000)+CONFIG_CSF_SIZE. The
alignment to 0x1000 is already done and is necessary in all cases
because that's the exact expected location of the 32 byte IVT
header. But the IVT+CSF blob tacked onto the end must be a total of
CONFIG_CSF_SIZE.
This is exactly the same fix as 89f19f45d650, except that this time
around I don't know how to cleanly get CONFIG_CSF_SIZE.
Billy Tsai [Wed, 16 Oct 2024 08:59:53 +0000 (16:59 +0800)]
gpio: Add Aspeed SGPIO driver
The Aspeed SGPIO driver supports the SGPIO controllers found in the
AST2400, AST2500 and AST2600 BMC SoCs. The implementation is a cut-down
copy of the upstream Linux kernel driver, adapted for u-boot.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Sughosh Ganu [Mon, 21 Oct 2024 17:24:33 +0000 (22:54 +0530)]
fdt: lmb: add reserved regions as no-overwrite
The boot_fdt_add_mem_rsv_regions() function reserves the memreserve and
reserved-memory regions. These regions are being set with the LMB_NONE
flag which allows overwriting and re-using the regions. This was fine
earlier when the LMB memory map was local and not enforced
globally. But that is no longer the case. Mark these regions as
LMB_NOOVERWRITE so that they cannot be used.
Sughosh Ganu [Mon, 21 Oct 2024 17:18:20 +0000 (22:48 +0530)]
lmb: add a check to prevent memory overrun
When printing the LMB flags for a memory region, there is a need to
check that the array index that is computed is a sane value. Put a
noisy assert in case this check fails, as that implies something with
the LMB code is not working as expected.
Tom Rini [Tue, 29 Oct 2024 02:54:36 +0000 (20:54 -0600)]
Merge patch series "boards: siemens: iot2050: SM variant, sysinfo support, fixes & cleanups"
Jan Kiszka <jan.kiszka@siemens.com> says:
This adds support for the new IOT2050 SM variant, introduces a sysinfo
driver which also permits SMBIOS support and switches the board to
OF_UPSTREAM. There are some further fixes for the boards included as well.
Not yet included is configuration support for DMA isolation via the PVU as
this depends on not yet merged DT bindings and another overlay.
[trini: This is just the first 10 patches in the series for now]
Baocheng Su [Tue, 22 Oct 2024 06:04:27 +0000 (08:04 +0200)]
board: iot2050: Support new IOT2050-SM variant
Main differences between the new variant and Advanced PG2:
1. Arduino interface is removed. Instead, an new ASIC is added for
communicating with PLC 1200 signal modules.
2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is
available.
3. DP interface is tailored down. Instead, to communicate with the
PLC 1200 signal modules, a USB 3.0 type B connector is added but the
signal is not USB.
4. DDR size is increased to 4 GB.
5. Two sensors are added, one tilt sensor and one light sensor.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: rebased over OF_UPSTREAM] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Conor Dooley [Wed, 23 Oct 2024 10:17:54 +0000 (11:17 +0100)]
riscv: dts: mpfs: migrate to OF_UPSTREAM
The U-Boot copy of the mpfs devicetree has, in general, been neglected
somewhat in comparison to the one in Linux. Moving to OF_UPSTREAM to
keep both in sync should serve to eliminate that discrepancy.
Additionally, moving to OF_UPSTREAM will let U-Boot automatically pick
up the devicetree rework that is in progress at [1].
Conor Dooley [Wed, 23 Oct 2024 10:17:52 +0000 (11:17 +0100)]
clk: microchip: mpfs: support new syscon based devicetree configuration
Why get a devicetree description wrong once when you can get it wrong
twice? The original mistake, which the driver supports was failing to
describe the main PLL that the "cfg" and "periph" clocks parented by.
The second mistake was describing the "cfg" and "periph" clocks a
reg region within the clock controller, rather as two registers within
a syscon region that also contains pinctrl, interrupt muxing controls
and other functions.
Make up for lost time and describe these regions as they should have
been originally, preserving support for the existing two configurations
for the sake of existing systems with firmware-provided devicetrees.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Anton Blanchard [Thu, 8 Aug 2024 02:14:17 +0000 (02:14 +0000)]
riscv: resume needs to be a global
If we take an exception before u-boot is relocated, there's a good
chance we will end up in an endless loop of exceptions because resume is
invalid until after relocation.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Jan Kiszka [Tue, 22 Oct 2024 06:04:25 +0000 (08:04 +0200)]
arm64: dts: ti: iot2050: Add overlays for M.2 used by firmware
To allow firmware to pick up all DTs from here, move the overlays that
are normally applied during DT fixup to the kernel source as well. Hook
then into the build nevertheless to ensure that regular checks are
performed.
Li Hua Qian [Tue, 22 Oct 2024 06:04:24 +0000 (08:04 +0200)]
arm64: dts: ti: iot2050: Disable lock-step for all iot2050 boards
The PG1 A variant of the iot2050 series has been identified which
partially lacks support for lock-step mode. This implies that all
iot2050 boards can't support this mode. As a result, lock-step mode has
been disabled across all iot2050 boards for consistency and to avoid
potential issues.
Jan Kiszka [Tue, 22 Oct 2024 06:04:23 +0000 (08:04 +0200)]
board: siemens: iot2050: Stop using special spl DT sources
We can simply use the default DT, Basic PG1, because no nodes that are
different between the variants play a role for SPL. Will help with the
migration to OF_UPSTREAM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Baocheng Su [Tue, 22 Oct 2024 06:04:22 +0000 (08:04 +0200)]
board: siemens: iot2050: Generalize the fdt fixup
The fdt fixup logic actually also applies to other possible variants who
also have device tree overlays. So generalize this part by extracting
it from the m.2 specific function and make it a standalone one.
Since now we only have M.2 variant consuming the overlay, it may not
have immediate effect for other variant, however this makes the future
variant more easier to apply fdt fixups.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
projects / u-boot.git / log
