Simon Glass [Thu, 1 Jun 2023 16:22:38 +0000 (10:22 -0600)]
fs: Create functions to load and allocate a file
This functionality current sits in bootstd, but it is more generally
useful. Add a function to load a file into memory, allocating it as
needed. Adjust bootstd to use this version.
Note: Tests are added in the subsequent patch which converts the 'cat'
command to use this function.
Simon Glass [Thu, 1 Jun 2023 16:22:36 +0000 (10:22 -0600)]
console: Correct truetype spacing error
The putc_xy() method is supposed to return the amount of space used. The
existing implementation erroneously adds the previous sub-pixel position
to the returned value. This spaces out the characters very slightly more
than it should. It is seldom noticeable but it does make accurate
measurement of the text impossible.
Fix this minor but long-standing bug.
Fixes: a29b012037c ("video: Add a console driver that uses TrueType fonts") Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 1 Jun 2023 16:22:31 +0000 (10:22 -0600)]
dm: core: Avoid registering an inaccessible tree
At present there are various restrictions on the use of livetree:
- It is only available once the tree is unflattened, i.e. after relocation
- It is designed to be used with the control FDT
- It can (in principle) be used with other FDTs, but only if they are
unflattened first; this is not supported
Add a few checks to make sure that any tree that is created is actually
valid. Otherwise it can be confusing when nodes and properties cannot
actually be accessed.
Simon Glass [Thu, 1 Jun 2023 16:22:29 +0000 (10:22 -0600)]
test: Restore test behaviour on failure
A recent change makes test continue to run after failure. This results in
a lot of useless output and may lead to a segfault. Fix this by adding
back the 'return' statement.
Fixes: fa847bb409d ("test: Wrap assert macros in ({ ... }) and fix") Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 12 Jul 2023 02:46:30 +0000 (20:46 -0600)]
bdinfo: Correct use of assertions
This test was written for the incorrect use of assertions. Update it to
build with the previous approach, where tests fail at the first
assertion.
All assertion functions return 0 on success and non-zero on failure.
They can be nested into functions simply by declaring a function that
returns an int and using ut_assertok() to call it.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
Chris Packham [Sun, 9 Jul 2023 22:47:36 +0000 (10:47 +1200)]
arm: mvebu: Add Allied Telesis x240 board
The x240 and SE240 are a series of L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
config: xea: Disable support for boot methods EXTLINUX and VBE
The XEA system (imx287 based) is not using support for EXTLINUX and VBE.
As those configuration options have been enabled by default with modern
Kconfig it is safe to explicitly disable them.
After that change the u-boot.img size has been reduced by ~16 KiB.
Drive CTRL_SLEEP_MOCI# high at boot (SPL) using a GPIO hog, this signal
may be used to control some power-rails on the carrier board, therefore
it should be set to high when the module is booting.
To do this as early as possible is generally a good idea and the issue
was noticed on the Yavia carrier board where it is needed to power the
I2C EEPROM on the carrier board.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Drive CTRL_SLEEP_MOCI# high at boot (SPL) using a GPIO hog, this signal
may be used to control some power-rails on the carrier board, therefore
it should be set to high when the module is booting.
To do this as early as possible is generally a good idea and the issue
was noticed on the Yavia carrier board where it is needed to power the
I2C EEPROM on the carrier board.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Adam Ford [Tue, 30 May 2023 22:45:58 +0000 (17:45 -0500)]
arm: dts: imx8mp: Sync the DT with kernel 6.4-rc4
Several changes have been made to the device tree
in the kernel, so update that as well as the
corresponding imx8mp-u-boot.dtsi files to prevent
breaking the booting.
Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
Adam Ford [Tue, 30 May 2023 22:45:57 +0000 (17:45 -0500)]
clk: imx8mp: Update clocks based on kernel 6.4-RC4
There are some newer clocks added to the kernel recently,
so to fix prepare for resycing the device trees, update
the clock list. Since there are some minor changes to
the USB clocks, update which USB clocks are enabled
to match with the upstream kernel as well.
Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice-gw74xx
Hugo Villeneuve [Thu, 25 May 2023 21:02:29 +0000 (17:02 -0400)]
imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
For SOM with the EC configuration, the ethernet PHY is located on the
SOM itself, and connected to the CPU ethernet controller. It has a
reset line controlled via GPIO1_IO9. In this configuration, the PHY
located on the carrier board is not connected to anything and is
therefore not used.
For SOM without EC configuration, the ethernet PHY on the carrier
board is connected to the CPU ethernet controller. It has a reset line
controlled via the GPIO expander PCA9534_IO5.
The hardware configuration (EC) is determined at runtime by
reading from the SOM EEPROM.
To support both hardware configurations (EC and non-EC), adjust/fix
the PHY reset gpios according to the hardware configuration
read at runtime from the SOM EEPROM. This adjustement is done in
U-Boot (OF_BOARD_FIXUP) and kernel (OF_BOARD_SETUP) device trees.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Marek Vasut [Wed, 5 Jul 2023 23:26:10 +0000 (01:26 +0200)]
ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
In case the i.MX8M Plus starts from eMMC BOOT1/BOOT2 HW partitions, the
flash.bin container is stored at offset 0 from the start, that means the
fitImage itb is at offset 0x2c0 instead of 0x300 sectors from the start.
Handle this difference in custom spl_mmc_get_uboot_raw_sector() .
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
The driver is implemented using driver model and provides
ADC uclass's methods for ADC single channel operations:
- adc_start_channel()
- adc_channel_data()
- adc_stop()
Tim Harvey [Fri, 23 Jun 2023 16:44:59 +0000 (09:44 -0700)]
configs: imx8m: Prepare imx8m-venice boards for HAB support
In order to enable HAB, FSL_CAAM, ARCH_MISC_INIT and
SPL_CRYPTO should be enabled in Kconfig like other i.MX8M
boards.
This also needs to occur in the SPL so enable CONFIG_SPL_BOARD_INIT and
add a void spl_board_init function which calls arch_misc_init to probe
the CAAM driver.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Update RAM Timings for 2GB RAM based on DDR Controller Configuration
Spreadsheet revision 22. Including the update of the refresh
rate to workaround errata ERR050805.
Tim Harvey [Thu, 15 Jun 2023 15:21:08 +0000 (08:21 -0700)]
mx8m: csf.sh: use vars for keys to avoid file edits when signing
The csf_spl.txt and csf_fit.txt templates contain file paths which must
be edited for the location of your NXP CST generated key files.
Streamline the process of signing an image by assigning unique var names
to these which can be expended from env variables in the csf.sh script.
The following vars are used:
SRK_TABLE - full path to SRK_1_2_3_4_table.bin
CSF_KEY - full path to the CSF Key CSF1_1_sha256_4096_65537_v3_usr_crt.pem
IMG_KEY - full path to the IMG Key IMG1_1_sha256_4096_65537_v3_usr_crt.pem
Additionally provide an example of running the csf.sh script.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Utkarsh Gupta [Thu, 15 Jun 2023 10:09:27 +0000 (18:09 +0800)]
imx: fsl_sec: preprocessor casting issue with addresses involving math
The sec_in32 preprocessor is defined as follows in include/fsl_sec.h file:
When address "a" is calculated using math for ex: addition of base address and
an offset, then casting is applied only to the first address which in this
example is base address.
caam_ccbvid_reg = sec_in32(CONFIG_SYS_FSL_SEC_ADDR + CAAM_CCBVID_OFFSET)
resolves to:
caam_ccbvid_reg = in_le32((ulong *)(ulong)CONFIG_SYS_FSL_SEC_ADDR +
CAAM_CCBVID_OFFSET)
instead it should resolve to:
caam_ccbvid_reg = in_le32((ulong *)(ulong)(CONFIG_SYS_FSL_SEC_ADDR +
CAAM_CCBVID_OFFSET))
Thus add parenthesis around the address "a" so that however the address is
calculated, the casting is applied to the final calculated address.
Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 15 Jun 2023 10:09:20 +0000 (18:09 +0800)]
imx: imx8: bootaux: Add i.MX8 M4 boot support
1. Implement bootaux for the M4 boot on i.MX8QM and QXP. Users need to download
M4 image to any DDR address first. Then use the
"bootaux <M4 download DDR address> [M4 core id]" to boot CM4_0
or CM4_1, the default core id is 0 for CM4_0.
Since current M4 only supports running in TCM. The bootaux will copy
the M4 image from DDR to its TCML.
2. Implment bootaux for HIFI on QXP
command: bootaux 0x81000000 1
Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 15 Jun 2023 10:09:19 +0000 (18:09 +0800)]
imx: bootaux: Fix bootaux issue when running on ARM64
The bootaux uses ulong to read private data and write to M4 TCM,
this cause problem on ARM64 platform where the ulong is 8bytes.
Fix it by using u32 to replace ulong.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 15 Jun 2023 10:09:18 +0000 (18:09 +0800)]
imx: bootaux: change names of MACROs used to boot MCU on iMX devices
The current bootaux supports i.MX8M and i.MX93, but the name "_M4_"
implies that the SoCs have Cortex-M4. Actually i.MX8MM/Q use Cortex-M4,
i.MX8MN/P use Cortex-M7, i.MX93 use Cortex-M33, so use "_MCU_" in place
of "_M4_" to simplify the naming.
Signed-off-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 15 Jun 2023 10:09:17 +0000 (18:09 +0800)]
imx: iamge-container: support secondary container
Add the support for loading image from secondary container set on
iMX8QM B0, iMX8QXP C0.
Using the SCFW API to get container set index, if it is the secondary
boot, get the offset from fuse and apply to offset of current container
set beginning for loading.
Also override the emmc boot partition to check secondary boot and switch
to the other boot part.
This patch is modified from NXP downstream:
imx8: Fix the fuse used by secondary container offset
imx: container: Skip container set check for ROM API
imx8: spl: Support booting from secondary container set
Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 15 Jun 2023 10:09:15 +0000 (18:09 +0800)]
imx: hab: Fix coverity issue in HAB event decoding
Fix below coverity issues caused by get_idx function where "-1" is
compared with uint8_t "element"
343336 Unsigned compared with neg
343337 Operands don't affect result
Additional, this function returns "-1" will cause overflow to
event string array.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 15 Jun 2023 10:09:13 +0000 (18:09 +0800)]
imx: misc: ele_mu: Update ELE MU driver
Extend the RX timeout value to 10s, because when authentication is failed
the ELE needs long time (>2s for 28M image) to return the result. Print
rx wait info per 1s.
Also correct TX and RX status registers in debug.
Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 15 Jun 2023 10:09:12 +0000 (18:09 +0800)]
imx: misc: ele_mu: Update MU TR registers count
According to SRM, the Sentinel MU has 8 TR and 4 RR registers. All
of them are used for ELE message. So update TR count to 8 and fix a
typo in receive msg
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 15 Jun 2023 10:09:10 +0000 (18:09 +0800)]
imx: cmd_dek: Fix Uninitialized pointer read
Fix Coverity (CID 21143558).
When tee_shm_register returns failure, the shm_input pointer is
invalid, should not free it. Same issue also exists on registering
shm_output.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 15 Jun 2023 10:09:06 +0000 (18:09 +0800)]
imx: parse-container: fix build warning
Fix build warning:
warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3
has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
printf("can't find memreg for image %d load address 0x%x, error %d\n",
warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but
argument 3 has type ‘sc_faddr_t’ {aka ‘long long unsigned int’} [-Wformat=]
debug("memreg %u 0x%lx -- 0x%lx\n", mr, start, end);
Peng Fan [Thu, 15 Jun 2023 10:09:03 +0000 (18:09 +0800)]
imx: congatec/cgtqmx8: correct SCU API usage
The return value is int type, not sc_err_t(u8), correct the usage.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Peng Fan [Thu, 15 Jun 2023 10:09:02 +0000 (18:09 +0800)]
imx: advantech: correct SCU API usage
The return value is int type, not sc_err_t(u8), correct the usage.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Running a memtest in U-Boot and Linux shows that some Colibri iMX6
produce bitflips at temperatures above 60°C. This happens because the
RALAT and WALAT values on the Colibri iMX6 are too low. The problems
were introduced by commit 09dbac8174c4 ("mx6: ddr: Restore ralat/walat
in write level calibration") before the calibration process overwrote
the values and set them to the maximum value. With this commit, we make
sure that the RALAT and WALAT values are set to the maximum values
again. This has been proven to work for years.
Fixes: 09dbac8174c4 ("mx6: ddr: Restore ralat/walat in write level calibration") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
William Zhang [Wed, 7 Jun 2023 23:37:05 +0000 (16:37 -0700)]
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
The newer BCMBCA SoCs such as BCM6756, BCM4912 and BCM6855 include an
updated SPI controller that add the capability to allow the driver to
control chip select explicitly. Driver can control and keep cs low
between the transfers natively. Hence the dummy cs workaround or prepend
mode found in the bcm63xx-hsspi driver are no longer needed and this new
driver is much cleaner.
William Zhang [Wed, 7 Jun 2023 23:37:04 +0000 (16:37 -0700)]
spi: bcm63xx-hsspi: Add prepend mode support
Due to the controller limitation to keep the chip select low during the
bus idle time between the transfer, a dummy cs workaround was used when
this driver was first upstreamed to the u-boot based on linux kernel
driver. It basically picks the dummy cs as !actual_cs so typically dummy
cs is 1 when most of the case only cs 0 is used in the board design.
Then invert the polarity of both cs and tell the controller to start the
transfers using dummy cs. Assuming both cs are active low before the
inversion, effectively this keeps dummy cs high and actual cs low during
the transfer and workaround the issue.
This workaround requires that dummy cs 1 pin to is set to SPI chip
selection function in the pinmux when the transfer clock is above 25MHz.
The old chips likely have default pinmux set to chip select on the dummy
cs pin so it works but this is not case for the new Broadband BCA chips
and this workaround stop working. This is specifically an issue to
support SPI NAND and SPI NOR flash because these flash devices can
typically run at or above 100MHz.
This patch utilizes the prepend feature of the controller to combine the
multiple transfers in the same message to a single transfer when
possible. This way there is no need to keep clock low between transfers
and solve the issue without any pinmux requirement.
Multiple transfers within a SPI message may be combined into one
transfer if the following are all true:
* One or more half duplex write transfer in single bit mode
* Optional full duplex read/write at the end
* No delay and cs_change between transfers
Most of the SPI device meets this requirements such as SPI NOR, SPI NAND
flash, Broadcom SPI voice card and etc. So this change switches to the
prepend mode as the default mode. For any SPI message that does not meet
the above requirement, we switch to original dummy cs mode but limit the
clock rate to the safe 25MHz.
William Zhang [Wed, 7 Jun 2023 23:37:03 +0000 (16:37 -0700)]
spi: bcm63xx-hsspi: Add new compatible string support
New compatible string brcm,bcmbca-hsspi-v1.0 is introduced based on
dts document brcm,bcm63xx-hsspi.yaml. Add it to the driver to support
this new binding.
William Zhang [Wed, 7 Jun 2023 23:37:02 +0000 (16:37 -0700)]
spi: bcm63xx-hsspi: Fix multi-bit mode setting
Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.
This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.
William Zhang [Wed, 7 Jun 2023 23:37:01 +0000 (16:37 -0700)]
spi: bcm63xx-hsspi: Make driver depend on BCMBCA arch
ARCH_BCMBCA was introduced to cover individual Broadcom broadband SoC
for common features and IP blocks. Use this config instead of each chip
config as the Kconfig dependency for Broadcom HSSPI driver.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Chris Packham [Sun, 9 Jul 2023 22:47:35 +0000 (10:47 +1200)]
mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K
The CN9130 SoC (an ARMADA 8K type) has both a NAND Flash Controller and
a generic local bus controller (Device Bus Controller) that share common
pins.
With a board design that incorporates both a NAND flash and uses
the Device Bus (in our case for an SRAM) accessing the Device Bus device
fails unless the NfArbiterEn bit is set. Setting the bit enables
arbitration between the Device Bus and the NAND flash.
Since there is no obvious downside in enabling this for designs that
don't require arbitration, we always enable it.
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
Chris Packham [Sun, 9 Jul 2023 22:47:34 +0000 (10:47 +1200)]
mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC
The NAND flash controller (NFC) on the AC5/AC5X SoC is the same as
the NFC used on other Marvell SoCs. It does have the additional
restriction of only supporting SDR timing modes up to 3.
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
projects / u-boot.git / log
