From: Bin Meng Date: Thu, 12 Oct 2017 12:07:57 +0000 (-0700) Subject: x86: baytrail: Fix unstable ACPI S3 resume X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=febdfaabc73473ca01e193e0a4be7e89e8f80cb4;p=u-boot.git x86: baytrail: Fix unstable ACPI S3 resume It was observed that when booting a Ubuntu 16.04 kernel, doing ACPI S3 suspend/resume sometimes causes the Ubuntu kernel hang forever. The issue is however not reproduced with a kernel built from i386/ x86_64 defconfig configuration. The unstability is actually caused by unexpected interrupts being generated during the S3 resume. For some unknown reason, FSP (gold4) for BayTrail configures the GPIO DFX5 PAD to enable level interrupt (bit 24 and 25). As this pin keeps generating interrupts during an S3 resume, and there is no IRQ requester in the kernel to handle it, the kernel seems to hang and does not continue resuming. Clear the mysterious interrupt bits for this pin. Reported-by: Stefan Roese Signed-off-by: Bin Meng Tested-by: Stefan Roese Reviewed-by: Stefan Roese --- diff --git a/arch/x86/cpu/baytrail/valleyview.c b/arch/x86/cpu/baytrail/valleyview.c index c58f6a86a8..9af1bdabbd 100644 --- a/arch/x86/cpu/baytrail/valleyview.c +++ b/arch/x86/cpu/baytrail/valleyview.c @@ -10,6 +10,13 @@ #include #include #include +#include + +/* GPIO SUS */ +#define GPIO_SUS_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSSUS) +#define GPIO_SUS_DFX5_CONF0 0x150 +#define BYT_TRIG_LVL BIT(24) +#define BYT_TRIG_POS BIT(25) #ifndef CONFIG_EFI_APP int arch_cpu_init(void) @@ -33,6 +40,21 @@ int arch_misc_init(void) mrccache_save(); #endif + /* + * For some unknown reason, FSP (gold4) for BayTrail configures + * the GPIO DFX5 PAD to enable level interrupt (bit 24 and 25). + * This does not cause any issue when Linux kernel runs w/ or w/o + * the pinctrl driver for BayTrail. However this causes unstable + * S3 resume if the pinctrl driver is included in the kernel build. + * As this pin keeps generating interrupts during an S3 resume, + * and there is no IRQ requester in the kernel to handle it, the + * kernel seems to hang and does not continue resuming. + * + * Clear the mysterious interrupt bits for this pin. + */ + clrbits_le32(GPIO_SUS_PAD_BASE + GPIO_SUS_DFX5_CONF0, + BYT_TRIG_LVL | BYT_TRIG_POS); + return 0; }