From: Oleg Kosheliev <oleg.kosheliev@ti.com>
Date: Tue, 8 Oct 2013 12:49:55 +0000 (+0300)
Subject: ARMV7: OMAP4: Add struct for twl603x data
X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=fc8895035b0d00d22d4edc6b327cb1805baa5872;p=u-boot.git

ARMV7: OMAP4: Add struct for twl603x data

The data struct is used to support different
PMIC chip types. It contains the chip type and
the data (e.g. registers addresses, adc multiplier)
which is different for twl6030 and twl6032.
Replaced some hardcoded values with the
structure vars.

Based on Balaji T K <balajitk@ti.com> patches for TI u-boot.

Signed-off-by: Oleg Kosheliev <oleg.kosheliev@ti.com>
---

diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index 0858b60e06..6bf1a33286 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -9,6 +9,17 @@
 
 #include <twl6030.h>
 
+static struct twl6030_data *twl;
+
+static struct twl6030_data twl6030_info = {
+	.chip_type	= chip_TWL6030,
+	.adc_rbase	= GPCH0_LSB,
+	.adc_ctrl	= CTRL_P2,
+	.adc_enable	= CTRL_P2_SP2,
+	.vbat_mult	= TWL6030_VBAT_MULT,
+	.vbat_shift	= TWL6030_VBAT_SHIFT,
+};
+
 static int twl6030_gpadc_read_channel(u8 channel_no)
 {
 	u8 lsb = 0;
@@ -16,12 +27,12 @@ static int twl6030_gpadc_read_channel(u8 channel_no)
 	int ret = 0;
 
 	ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
-				  GPCH0_LSB + channel_no * 2, &lsb);
+				  twl->adc_rbase + channel_no * 2, &lsb);
 	if (ret)
 		return ret;
 
 	ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
-				  GPCH0_MSB + channel_no * 2, &msb);
+				  twl->adc_rbase + 1 + channel_no * 2, &msb);
 	if (ret)
 		return ret;
 
@@ -33,7 +44,8 @@ static int twl6030_gpadc_sw2_trigger(void)
 	u8 val;
 	int ret = 0;
 
-	ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
+	ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+				   twl->adc_ctrl, twl->adc_enable);
 	if (ret)
 		return ret;
 
@@ -41,7 +53,8 @@ static int twl6030_gpadc_sw2_trigger(void)
 	val =  CTRL_P2_BUSY;
 
 	while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
-		ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
+		ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+					  twl->adc_ctrl, &val);
 		if (ret)
 			return ret;
 		udelay(1000);
@@ -116,7 +129,7 @@ int twl6030_get_battery_voltage(void)
 		printf("Failed to read battery voltage\n");
 		return ret;
 	}
-	battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+	battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
 	printf("Battery Voltage: %d mV\n", battery_volt);
 
 	return battery_volt;
@@ -128,6 +141,8 @@ void twl6030_init_battery_charging(void)
 	int battery_volt = 0;
 	int ret = 0;
 
+	twl = &twl6030_info;
+
 	/* Enable VBAT measurement */
 	twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
 
diff --git a/include/twl6030.h b/include/twl6030.h
index b4035ba4fe..9399737ad3 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -113,6 +113,24 @@
 #define GPCH0_LSB	0x57
 #define GPCH0_MSB	0x58
 
+#define TWL6030_VBAT_MULT	40 * 1000
+
+#define TWL6030_VBAT_SHIFT	(10 + 3)
+
+enum twl603x_chip_type{
+	chip_TWL6030,
+	chip_TWL603X_cnt
+};
+
+struct twl6030_data{
+	u8 chip_type;
+	u8 adc_rbase;
+	u8 adc_ctrl;
+	u8 adc_enable;
+	int vbat_mult;
+	int vbat_shift;
+};
+
 /* Functions to read and write from TWL6030 */
 static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
 {