From: Lukasz Majewski Date: Tue, 9 May 2023 14:32:43 +0000 (+0200) Subject: arm: config: Adjust imx287 based XEA board PMU configuration X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=e7c1c0811bc27ff246864773f1aecd4f9200bed8;p=u-boot.git arm: config: Adjust imx287 based XEA board PMU configuration This patch adjusts XEA's PMU setup as this board is supposed to be mainly powered from DCDC_BATT source. Moreover, in this HW design the VDD_4P2 is not used as well. Signed-off-by: Lukasz Majewski --- diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index 06dd6b1f0e..6469e59614 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -14,6 +14,9 @@ CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="imx28-xea" CONFIG_SPL_TEXT_BASE=0x1000 CONFIG_TARGET_XEA=y +CONFIG_SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT=y +CONFIG_SPL_MXS_PMU_DISABLE_BATT_CHARGE=y +# CONFIG_SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR is not set CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK=0x20000