From: Simon Glass Date: Sun, 23 Jul 2023 03:43:57 +0000 (-0600) Subject: binman: Support templates containing phandles X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=d4d97661d255571118b6fdee0cf082a75f29af29;p=u-boot.git binman: Support templates containing phandles This provides support for phandles to be copied over from templates. This is not quite safe, since if the template is instantiated twice (i.e. in two different nodes), then duplicate phandles will be found. This will result in an error. Signed-off-by: Simon Glass --- diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index 147fbc5ff1..aeea33fddb 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -1264,6 +1264,24 @@ The initial devicetree produced by the templating process is written to the a failure before the final `u-boot.dtb.out` file is written. A second `u-boot.dtb.tmpl2` file is written when the templates themselves are removed. +Dealing with phandles +--------------------- + +Templates can contain phandles and these are copied to the destination node. +However this should be used with care, since if a template is instantiated twice +then the phandle will be copied twice, resulting in a devicetree with duplicate +phandles, i.e. the same phandle used by two different nodes. Binman detects this +situation and produces an error, for example:: + + Duplicate phandle 1 in nodes /binman/image/fit/images/atf/atf-bl31 and + /binman/image-2/fit/images/atf/atf-bl31 + +In this case an atf-bl31 node containing a phandle has been copied into two +different target nodes, resulting in the same phandle for each. See +testTemplatePhandleDup() for the test case. + +The solution is typically to put the phandles in the corresponding target nodes +(one for each) and remove the phandle from the template. Updating an ELF file ==================== diff --git a/tools/binman/control.py b/tools/binman/control.py index da33c88883..c6d3205b8c 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -575,6 +575,10 @@ def PrepareImagesAndDtbs(dtb_fname, select_images, update_fdt, use_expanded): _RemoveTemplates(node) dtb.Sync(True) + + # Rescan the dtb to pick up the new phandles + dtb.Scan() + node = _FindBinmanNode(dtb) fname = tools.get_output_filename('u-boot.dtb.tmpl2') tools.write_file(fname, dtb.GetContents()) diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index ecada41833..36428ec343 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -6969,6 +6969,33 @@ fdt fdtmap Extract the devicetree blob from the fdtmap # Move to next spl_data = content[:0x18] + def testTemplatePhandle(self): + """Test using a template in a node containing a phandle""" + entry_args = { + 'atf-bl31-path': 'bl31.elf', + } + data = self._DoReadFileDtb('291_template_phandle.dts', + entry_args=entry_args) + fname = tools.get_output_filename('image.bin') + out = tools.run('dumpimage', '-l', fname) + + # We should see the FIT description and one for each of the two images + lines = out.splitlines() + descs = [line.split()[-1] for line in lines if 'escription' in line] + self.assertEqual(['test-desc', 'atf', 'fdt'], descs) + + def testTemplatePhandleDup(self): + """Test using a template in a node containing a phandle""" + entry_args = { + 'atf-bl31-path': 'bl31.elf', + } + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb('292_template_phandle_dup.dts', + entry_args=entry_args) + self.assertIn( + 'Duplicate phandle 1 in nodes /binman/image/fit/images/atf/atf-bl31 and /binman/image-2/fit/images/atf/atf-bl31', + str(e.exception)) + def testTIBoardConfig(self): """Test that a schema validated board config file can be generated""" data = self._DoReadFile('293_ti_board_cfg.dts') diff --git a/tools/binman/test/291_template_phandle.dts b/tools/binman/test/291_template_phandle.dts new file mode 100644 index 0000000000..c4ec1dd41b --- /dev/null +++ b/tools/binman/test/291_template_phandle.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + multiple-images; + + ti_spl_template: template-1 { + fit { + description = "test-desc"; + #address-cells = <1>; + images { + atf { + description = "atf"; + ti-secure { + type = "collection"; + content = <&atf>; + keyfile = "key.pem"; + }; + atf: atf-bl31 { + description = "atf"; + }; + }; + }; + }; + }; + + image { + insert-template = <&ti_spl_template>; + fit { + images { + fdt-0 { + description = "fdt"; + ti-secure { + type = "collection"; + content = <&foo_dtb>; + keyfile = "key.pem"; + }; + foo_dtb: blob-ext { + filename = "vga.bin"; + }; + }; + }; + }; + }; + }; +}; diff --git a/tools/binman/test/292_template_phandle_dup.dts b/tools/binman/test/292_template_phandle_dup.dts new file mode 100644 index 0000000000..dc86f06463 --- /dev/null +++ b/tools/binman/test/292_template_phandle_dup.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + multiple-images; + + ti_spl_template: template-1 { + fit { + description = "test-desc"; + #address-cells = <1>; + images { + atf { + description = "atf"; + ti-secure { + type = "collection"; + content = <&atf>; + keyfile = "key.pem"; + }; + atf: atf-bl31 { + description = "atf"; + }; + }; + }; + }; + }; + + image { + insert-template = <&ti_spl_template>; + fit { + images { + fdt-0 { + description = "fdt"; + ti-secure { + type = "collection"; + content = <&foo_dtb>; + keyfile = "key.pem"; + }; + foo_dtb: blob-ext { + filename = "vga.bin"; + }; + }; + }; + }; + }; + + image-2 { + insert-template = <&ti_spl_template>; + fit { + images { + fdt-0 { + description = "fdt"; + blob-ext { + filename = "vga.bin"; + }; + }; + }; + }; + }; + }; +};