From: Hans de Goede Date: Fri, 20 Nov 2015 18:29:49 +0000 (+0100) Subject: sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCs X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=cbc1a91afb7fb0f096453e5574bc5c0719c6c9c4;p=u-boot.git sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCs According to the datasheets the max speed of AHB1 is 276 MHz, so setting it to PLL6 / 3 which gives us 200MHz everywhere is fine, and gives us a nice speed-up in certain workloads. Suggested-by: Chen-Yu Tsai Signed-off-by: Hans de Goede Acked-by: Ian Campbell Tested-by: Chen-Yu Tsai --- diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 09337a1dea..5c76275112 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -220,11 +220,7 @@ struct sunxi_ccm_reg { #define CCM_PLL11_CTRL_UPD (0x1 << 30) #define CCM_PLL11_CTRL_EN (0x1 << 31) -#if defined CONFIG_MACH_SUN8I_H3 #define AHB1_ABP1_DIV_DEFAULT 0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */ -#else -#define AHB1_ABP1_DIV_DEFAULT 0x00002020 /* AHB1=AXI/4, APB1=AHB1/2 */ -#endif #define AXI_GATE_OFFSET_DRAM 0