From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 18 Feb 2020 12:51:02 +0000 (+0100)
Subject: net: phy: dp83867: Add SGMII mode type switching
X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=a7844953acc9711f71bc864f69f922e87ff2ee9f;p=u-boot.git

net: phy: dp83867: Add SGMII mode type switching

This patch adds ability to switch beetween two PHY SGMII modes.
Some hardware, for example, FPGA IP designs may use 6-wire mode
which enables differential SGMII clock to MAC.

Patch description, dt flags have been done in mainline Linux by
commit a2111c460c0c ("net: phy: dp83867: Add documentation for SGMII mode type")
and by commit 507ddd5c0d47 ("net: phy: dp83867: Add SGMII mode type switching")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 0098997c0c..50804c130e 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -29,6 +29,7 @@
 #define DP83867_STRAP_STS2	0x006f
 #define DP83867_RGMIIDCTL	0x0086
 #define DP83867_IO_MUX_CFG	0x0170
+#define DP83867_SGMIICTL	0x00D3
 
 #define DP83867_SW_RESET	BIT(15)
 #define DP83867_SW_RESTART	BIT(14)
@@ -101,6 +102,9 @@
 /* CFG4 bits */
 #define DP83867_CFG4_PORT_MIRROR_EN		BIT(0)
 
+/* SGMIICTL bits */
+#define DP83867_SGMII_TYPE			BIT(14)
+
 enum {
 	DP83867_PORT_MIRRORING_KEEP,
 	DP83867_PORT_MIRRORING_EN,
@@ -116,6 +120,7 @@ struct dp83867_private {
 	int port_mirroring;
 	bool set_clk_output;
 	unsigned int clk_output_sel;
+	bool sgmii_ref_clk_en;
 };
 
 static int dp83867_config_port_mirroring(struct phy_device *phydev)
@@ -236,6 +241,9 @@ static int dp83867_of_init(struct phy_device *phydev)
 	if (ofnode_read_bool(node, "enet-phy-lane-no-swap"))
 		dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS;
 
+	if (ofnode_read_bool(node, "ti,sgmii-ref-clock-output-enable"))
+		dp83867->sgmii_ref_clk_en = true;
+
 	return 0;
 }
 #else
@@ -331,6 +339,10 @@ static int dp83867_config(struct phy_device *phydev)
 	}
 
 	if (phy_interface_is_sgmii(phydev)) {
+		if (dp83867->sgmii_ref_clk_en)
+			phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL,
+				      DP83867_SGMII_TYPE);
+
 		phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
 			  (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));